Opticon OPN-3002i Bedienungsanleitung
Opticon
Barcode-Leser
OPN-3002i
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Opticon OPN-3002i (4 Seiten) in der Kategorie Barcode-Leser. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
OPN3002i Bluetooth Quick Start Guide
OPN3002i
Function Key
Feedback LED
USB Connector (Data/Charging)
Feedback Buzzer
Trigger Key
2D Imager
USB Data
Enabled
Disabled
SPP
(Serial Port Profile)
HID (Most Common)
(Human Interface Device)
Bluetooth Mode
Apple MFi
(Made for iDevice)
Note: Apple MFi mode requires the OPNTerm application which is available for download from the Apple App Store.
Bluetooth Options
• Bluetooth-HID - This connection mode is the most common and is normally supported by host devices
(computers, tablets and smartphones). Bluetooth-HID mode works as if a Bluetooth keyboard were
attached to the host device. This means that all data scanned will be as if typed. It is important that
there is a blinking cursor ready to accept your scanned data. Any text field is a valid place to scan a
barcode.
• Bluetooth-SPP - This connection mode can be complicated and is only recommended for advanced
users or users who have a dedicated application that manages connections to the scanner. It may also
be necessary when pairing with host devices that do not support Bluetooth-HID mode (such as most
older BlackBerry and Android devices). In this case, you may wish to download and install Opticon’s
wedge application (OpticonRL) from our website (see below).
• Apple MFi - This Bluetooth mode is a serial connection mode similar to Bluetooth-SPP though in a
proprietary format devised by Apple. It allows two-way communication with the scanner from an iOS
application that implements Opticon’s iOS SDKs (an example of which is called OPNTerm which can be
downloaded from the Apple App Store). The associated APIs allow iOS developers to create their own
OPN3002i applications or integrate the OPN3002i into their existing application.
Feedback Options
• Vibrate Only - The OPN3002i will only vibrate to alert the operator of a successful scan.
• - The OPN3002i will only beep to alert the operator of a successful scan.Beeper Only
• Beeper & Vibrate - The OPN3002i will both beep and vibrate to alert the operator of a successful scan.
Bluetooth Disconnect / Reconnect
• When connected, a Bluetooth connection can be broken by holding the trigger key for 5 seconds. This
will prolong battery life in some situations.
• When disconnected, a Bluetooth connection can be reestablished by holding the trigger key for 5
seconds. Barcode data stored when disconnected will be automatically transmitted.
Feedback
Beeper Only
Vibrate Only
Beeper & Vibrate
USB Data Options
• Enabled (Default) - This feature allows the data stored on the OPN3002i to
be transferred to an attached computer. Data is stored when the Bluetooth
connection goes out of range or is otherwise interrupted. Stored data is
automatically transmitted to the host device upon reestablishing the
Bluetooth connection. The Bluetooth connection mode also determines
the USB connection mode. Bluetooth-SPP and Apple MFi modes will
connect as USB-VCP (serial port) devices while Bluetooth-HID mode will
result in an USB-HID (keyboard) connection.
• Disabled - In this mode, the USB connector is used only to charge the
OPN3002i.
iOS Keyboard Options
• iOS On - This mode is a companion mode to Bluetooth-HID and is intended
for use with any Apple iDevice (iPhone, iPad and iPod) that has an on-
screen keyboard. When this feature is enabled, the on-screen keyboard
can be toggled on and off by use of the function key on the OPN3002i. The
typical behavior for an iDevice is to hide the on-screen keyboard when a
Bluetooth keyboard is paired (as the OPN3002i effectively is). Note that
this feature is not used in Apple MFi mode.
iOS Keyboard Options
iOS On
Defaults
Reset
OPNTerm
App Web Address
Produktspezifikationen
| Marke: | Opticon |
| Kategorie: | Barcode-Leser |
| Modell: | OPN-3002i |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Opticon OPN-3002i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Barcode-Leser Opticon
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
Bedienungsanleitung Barcode-Leser
- Barcode-Leser Approx
- Barcode-Leser Manhattan
- Barcode-Leser Trimble
- Barcode-Leser König
- Barcode-Leser Renkforce
- Barcode-Leser Nilox
- Barcode-Leser Motorola
- Barcode-Leser Olympia
- Barcode-Leser Garmin
- Barcode-Leser Casio
- Barcode-Leser Honeywell
- Barcode-Leser ELO
- Barcode-Leser Datamax-O'neil
- Barcode-Leser Intermec
- Barcode-Leser Zebra
- Barcode-Leser Digitus
- Barcode-Leser HTC
- Barcode-Leser Palm
- Barcode-Leser Deltaco
- Barcode-Leser IFM
- Barcode-Leser Datalogic
- Barcode-Leser DeLOCK
- Barcode-Leser ID-Tech
- Barcode-Leser Steren
- Barcode-Leser Posiflex
- Barcode-Leser Newland
- Barcode-Leser Atlantis Land
- Barcode-Leser Brady
- Barcode-Leser Godex
- Barcode-Leser Socket Mobile
- Barcode-Leser Adesso
- Barcode-Leser Code
- Barcode-Leser Cypress
- Barcode-Leser QUIO
- Barcode-Leser Tecno
- Barcode-Leser Unitech
- Barcode-Leser Argox
- Barcode-Leser CipherLab
- Barcode-Leser Code Corporation
- Barcode-Leser Wasp
- Barcode-Leser Hamlet
- Barcode-Leser EC Line
- Barcode-Leser Vultech
- Barcode-Leser Psion
- Barcode-Leser Bluebird
- Barcode-Leser POS-X
- Barcode-Leser Mach Power
- Barcode-Leser Qoltec
- Barcode-Leser Koamtac
- Barcode-Leser DENSO
- Barcode-Leser Baracoda
- Barcode-Leser Qian
- Barcode-Leser IC Intracom
- Barcode-Leser POSline
- Barcode-Leser ZBA
Neueste Bedienungsanleitung für -Kategorien-
6 Oktober 2024
3 Oktober 2024
3 Oktober 2024
23 September 2024
22 September 2024
13 September 2024
13 September 2024
12 September 2024
6 September 2024
6 September 2024