Onkyo SKF-3600 Bedienungsanleitung

Onkyo Lautsprecher SKF-3600

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Onkyo SKF-3600 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
En
Speaker System
SKF-3600
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new speaker system.
Please retain this manual for future reference.
Contents
Supplied accessories 2
Using the included
speaker bases 2
Placement 2
Connections 3
Precaution on use 3
Speaker care 4
Use with a TV set or
computer 4
Speciļ¬cations 4
2
SKF-3600 (front speaker)
Ɨ 2
Speaker cord
Ɨ 2 (red, white: 3.5m)
Speaker base
Ɨ 2
Screws
Ɨ 6
Front left and right speakers
Output overall sound. They play the most important role
in a home theater system, by creating basic sound
images and ļ¬elds.
Place the front speakers in front of the listener so that
they point to the listenerā€™s ears in the listening position
for music and movies. Ideal speaker placement is so that
they are located symmetrically.
The speaker cabinet is made of wood and sensitive to
extreme temperatures and humidity. Avoid placing the
speaker system in locations subjected to direct sunlight
or in humid places such as near an air conditioner, bath-
room, or kitchen.
Before making speaker connection, attach the supplied
speaker bases to the SKF-3600.
1. Turn the speaker upside down.
2. Match the screw halls on the speaker base to those
on the speaker, and ļ¬x the base to the speaker using
screws.
SAFETY PRECAUTIONS:
ā€¢ When attaching the speaker bases, work with them on
a ļ¬‚at, level, and solid ļ¬‚oor.
ā€¢ After attached the speaker bases, verify that the
speakers stand upright and stably.
Using the speaker cable hook
The supplied speaker base has a speaker cable hook. It
is recommended that you hook the cables on the hook to
avoid cable congestion.
Supplied accessories
Placement
Using the included speaker bases
3
ā€¢ Be sure to turn off your ampliļ¬er before connecting
the speaker system. Connecting it while the ampliļ¬er
is on may result in damage to the ampliļ¬er or the
speaker system.
ā€¢ The nominal impedance of this speaker system is 8
ā„¦
.
Use only ampliļ¬ers capable of handling this imped-
ance.
ā€¢ Use the supplied speaker cables to connect between
the speakerā€™s input terminals and the ampliļ¬erā€™s
speaker terminals as illustrated below.
ā€¢ Be sure to connect the Right and Left speakers with
the ampliļ¬erā€™s corresponding speaker terminals.
Also, be sure that you are connecting the speakerā€™s
positive (+) and negative (ā€“) input terminals with the
ampliļ¬erā€™s corresponding positive and negative
speaker terminals. Otherwise, undesirable sound ļ¬eld
or impaired bass-range reproduction will result.
ā€¢ Before turning on the ampliļ¬erā€™s power switch, pull
lightly on the speaker cables to ensure that they are
connected securely.
ā€¢ To prevent damage to circuitry,
never short-circuit the positive
(+) and negative (ā€“) speaker
wire.
ā€¢ This speaker system can handle the speciļ¬ed input
power when it is used for ordinary music reproduc-
tion. If the following abnormal signals are fed to the
speaker, however, an overcurrent may ļ¬‚ow in the
internal circuits, causing burning or breakage of the
wires even if the input power is below the speciļ¬ed
rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an oscillator,
an electronic musical instruments, etc.
4. Oscillating ampliļ¬er signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or disconnect-
ing audio connection cables (Always turn off the
ampliļ¬erā€™s power before connecting or discon-
necting cables.)
7. Howling when a microphone is used
ā€¢ Do not place magnetic objects such as screwdrivers
and iron parts near the speaker system since they use
speakers with strong magnets. Otherwise, the objects
may be attracted, causing injury or damaging the dia-
phragm.
Connections
SURRO UND BACK
SPEAKER
FRONT
SPEAKERS SURROUND
SPEAKERS CENTER
SPEAKER
R
L
R
L
A B
R
L
SKF-3600
Front right
speaker
SKF-3600
Front left
speaker
SKC-3600
Center speaker
SKM-3600
Surround right
speaker
SKM-3600
Surround left
speaker
Red White
1. Strip the insulation of speaker
cables, and twist the core wires
tightly.
2. While pressing the lever, insert
the wire into the hole, and then
release the lever.
3. Make sure that the terminals
are gripping the core wires, not
the insulation.
Both SKC-3600 and SKM-3600 come with SKS-3600.
Precaution on use


Produktspezifikationen

Marke: Onkyo
Kategorie: Lautsprecher
Modell: SKF-3600

Brauchst du Hilfe?

Wenn Sie Hilfe mit Onkyo SKF-3600 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Onkyo

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-