Omron RS3 Bedienungsanleitung

Omron Blutdruckmessgerät RS3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Omron RS3 (2 Seiten) in der Kategorie Blutdruckmessgerät. Dieser Bedienungsanleitung war für 52 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Thank you for purchasing the OMRON RS3 Wrist Blood Pressure

Monitor.

The OMRON RS3 is a compact and easy to use blood pressure

monitor, operating on the oscillometric principle. It measures your

blood pressure and pulse rate simply and quickly. For comfortable

controlled inflation without the need of pressure pre-setting or

re-inflation the device uses its advanced “IntelliSense” technology.

Intended Use

This product is designed to measure the blood pressure and pulse

rate of people within the range of the designated wrist cuff, following

the instructions in this instruction manual.

It is mainly designed for general household use. Please read the

Important Safety Information in this instruction manual before using

the unit.

Please read this instruction manual thoroughly before using the

unit.

Please keep for future reference.

For specific information about your own blood pressure,

CONSULT YOUR DOCTOR.

Consult your doctor prior to using in pregnancy or if diagnosed with

arrhythmia or arteriosclerosis.

Please read this section carefully before using the unit.

Warning:

• Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

(General Usage)

• Always consult your doctor. Self-diagnosis of measurement results

and self-treatment are dangerous.

• People with severe blood flow problems, or blood disorders, should

consult a doctor before using the unit, as cuff inflation can cause

internal bleeding.

(Battery Usage)

• If battery fluid should get in your eyes, immediately rinse with

plenty of clean water. Consult a doctor immediately.

Caution:

• Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury to the user or patient or

damage to the equipment or other property.

(General Usage)

• Do not leave the unit unattended with infants or persons who

cannot express their consent.

• Do not use the unit for any purpose other than measuring blood

pressure.

• Do not use a mobile phone or other devices that emit

electromagnetic fields, near the unit. This may result in incorrect

operation of the unit.

• Do not disassemble the unit or wrist cuff.

• Do not operate the unit in a moving vehicle (car, airplane).

(Battery Usage)

• If battery fluid should get on your skin or clothing, immediately rinse

with plenty of clean water.

• Use only two “AAA” alkaline (LR03) batteries with this unit.

• Do not insert the batteries with their polarities incorrectly aligned.

• Replace old batteries with new ones immediately. Replace both

batteries at the same time.

• Remove the batteries if the unit will not be used for three months or

more.

• Do not use new and used batteries together.

General Precautions

• Do not apply strong shocks and vibrations to or drop the unit.

• Do not take measurements after bathing, drinking alcohol or

caffeine, smoking, exercising or eating.

• Do not inflate the wrist cuff when it is not wrapped around your

wrist.

• Read and follow the “Important information regarding Electro

Magnetic Compatibility (EMC)” in the Technical Data Section.

• Read and follow the “Correct Disposal of This Product” in the

Technical Data Section when disposing of the device and any used

accessories or optional parts.

Main unit:

Display:

2.1 Installing/Replacing the Batteries

• If the battery low symbol ( ) appears on the display, turn off

the unit then replace both batteries at the same time.

• The measurement values continue to be stored in memory

even after the batteries are replaced.

Disposal of used batteries should be carried out in accordance

with the national regulations for the disposal of batteries.

2.2 Setting the Date and Time

Notes:

• If the batteries have been removed, the date and time setting

will need to be reset.

• If the date and time are not set, “-:--” appears during or after

measurement.

3.1 Applying the Wrist Cuff

Do not apply over clothing.

3.2 How to Sit Correctly

• Relax your wrist and hand. Do not bend your wrist back, clench

your fist, or bend your wrist forward.

3.3 Taking a Reading

Notes:

• To cancel a measurement, press the START/STOP button at

any time during measurement.

• Remain still while taking a measurement.

Cuff Wrapping Guide

The Cuff Wrapping Guide is a unique feature that

indicates if the cuff is not wrapped tightly enough

around the wrist. Even when the is displayed, a

blood pressure reading will be taken.

Note: This reading is NOT reliable due to the incorrect

wrapping of the cuff. Please wrap the cuff again, taking

care to wrap it correctly and take the measurement

again. When the is displayed, the cuff is correctly

wrapped tightly enough on the wrist and the reading is

accurate and reliable.

The monitor automatically stores the measurement in its

memory.

It will automatically turn off after two minutes.

This criteria is for home blood pressure measurement.

If the irregular heartbeats cause the measurement to be

invalid, no result is shown. If the irregular heartbeat symbol

( ) is shown after you have taken a measurement, repeat

the measurement. If the irregular heartbeat symbol ( ) is

shown frequently, please make your doctor aware of it.

Notes:

• Wait 2 - 3 minutes before taking another blood

pressure measurement. Waiting between readings

allows the arteries to return to the condition prior to

taking the blood pressure measurement.

• The blood pressure can differ between the right arm

and the left arm, and therefore also the measured

blood pressure values can be different. OMRON

recommends to always use the same arm for

measurement. If the values between the two arms

differ substantially, please check with your physician

which arm to use for your measurement.

Warning:

Self-diagnosis of measured results and treatment are

dangerous. Please follow the instructions of your doctor.

A. Wrist cuff D. Memory ( ) button

B. Battery compartment E. Date/Time setting ( ) button

C. Display F. START/STOP button

Wrist Blood

Pressure Monitor

Model RS3

Instruction Manual

IM-HEM-6130-E-02-01/2013

5338830-7B

Introduction

Important Safety Information

1. Overview

G. Memory symbol

H. Systolic blood pressure

I. Diastolic blood pressure

J. Battery low symbol

K. Heartbeat symbol

(Flashes during measurement)

L. Average value symbol

M. Date/Time display

N. Blood pressure level indicator

O. Pulse display and Memory

number

P. Deflation symbol

Q. Cuff wrapping guide

R. Movement error symbol

S. Irregular heartbeat symbol

1. Remove the battery cover.

2. Insert two 1.5V “AAA”

alkaline (LR03) batteries

as indicated in the battery

compartment and then

replace the battery cover.

Notes:

1. Press and hold the button until the year

flashes on the display.

2. Set the monitor to the correct date and time

before taking a measurement for the first time.

3. Press the START/STOP button to store the

setting.

1. Place the wrist cuff over

your wrist.

Your palm should face upward.

2. Wrap the wrist cuff around

your wrist.

Wrap the wrist cuff securely

around the wrist for taking

accurate measurements.

Make sure that the wrist cuff

does not cover the protruding

part of the wrist bone (ulna) on

the outside of the wrist.

Note: You can take a

measurement on either

your left or right wrist.

O P

L M N

2. Preparation

Year

Month

Day

Hour

Minute

1) Push the button to change.

• Hold down to advance the digit

rapidly.

2) Push the button to confirm.

• Next setting appears.

3. Using the Unit

To take a measurement, you need

to be relaxed and comfortably

seated, under comfortable room

temperature. No bathing, drinking

alcohol or caffeine, smoking,

exercising or eating 30 minutes

before taking a measurement.

• Sit on a chair with your feet flat on the

floor.

• Sit upright with your back straight.

• The cuff should be at the same level

as your heart.

1. Press the START/STOP button.

All the symbols appear on the display.

The wrist cuff will start to inflate automatically.

2. Undo the wrist cuff and remove the unit.

3. Press the START/STOP button to turn off the

monitor.

Important:

• Recent research suggests that the

following values can be used as a

guide to high blood pressure for

measurements taken at home.

Systolic Blood Pressure Above 135 mmHg

Diastolic Blood Pressure Above 85 mmHg

• Your blood pressure monitor includes an

irregular heartbeat feature. Irregular

heartbeats can influence the results of the

measurement. The irregular heartbeat

algorithm automatically determines if the

measurement is usable or needs to be

repeated. If the measurement results are

affected by irregular heartbeats but the result

is valid, the result is shown together with the

irregular heartbeat symbol ( ).

• If you move during measurement, the

movement error symbol ( ) will appear on

the display. Keep still and repeat the

measurement.

Cuff Wrapping Guide

START INFLATE DEFLATE COMPLETE

Alternating

date/time display

3.4 Using the Memory Function

The unit automatically stores up to 60 sets of measurement

values (blood pressure and pulse rate).

It can also calculate an average reading based on the

measurements from the last three readings taken within 10

minutes. If there are only two readings in memory for that

period, the average will be based on two readings. If there is

one reading in memory for that period, the average will be

based on one reading.

Notes:

• If the memory is full, the monitor will delete the oldest

readings.

• When viewing the reading taken without setting the date and

time, “-:--” is displayed instead of the date and time.

To View the Average Value

To View the Readings Stored in Memory

To Delete All the Values Stored in Memory

Note: You cannot partially delete the stored readings.

4.1 The Icons and Error Messages

Note: The irregular heartbeat symbol ( ) may also be displayed

with error messages.

4.2 Troubleshooting

4.3 Maintenance

To protect your unit from damage, please observe the

following:

• Do not subject the main unit and the cuff to

extreme temperatures, humidity, moisture or

direct sunlight.

• Do not disassemble the unit.

• Do not subject the unit to strong shocks or

vibrations (for example, dropping the unit on the

floor).

• Do not use volatile liquids to clean the main unit.

• Do not wash the cuff or immerse it in water.

• Do not use petrol, thinners or similar solvents to

clean the cuff.

• Do not carry out repairs of any kind yourself. If a

defect occurs, consult your OMRON retail outlet

or distributor as mentioned on the packaging.

• The unit should be cleaned with a soft, dry cloth.

• Use a soft, moistened cloth and soap to clean

the cuff.

• Keep the unit in its storage case when not in

use.

• Fold the cuff into the storage case.

Do not store the unit in the following situations:

• If the unit is wet.

• Locations exposed to extreme temperatures,

humidity, direct sunlight, dust or corrosive

vapours.

• Locations exposed to vibrations, shocks or

where it will be at an angle.

Calibration and Service

• The accuracy of this blood pressure monitor has

been carefully tested and is designed for a long

service life.

• It is generally recommended to have the unit

inspected every two years to ensure correct

functioning and accuracy. Please consult your

authorised OMRON dealer or the OMRON

Customer Service at the address given on the

packaging or attached literature.

Note: Subject to technical modification without prior notice.

• This device fulfils the provisions of EC directive 93/42/EEC

(Medical Device Directive).

• This blood pressure monitor is designed according to the European

Standard EN1060, Non-invasive sphygmomanometers Part 1:

General Requirements and Part 3: Supplementary requirements

for electromechanical blood pressure measuring systems.

• This OMRON product is produced under the strict quality system of

OMRON HEALTHCARE Co. Ltd., Japan. The Core component for

OMRON blood pressure monitors, which is the Pressure Sensor, is

produced in Japan.

Made in China

Press the Memory button.

Note: If there are no measurements

results stored in the memory, the

screen to the right is displayed.

1. Press the button, while the average value is

displayed.

The Memory number

appears for a second

before the pulse rate is

displayed. The newest

set is numbered “1”.

2. Press the button repeatedly to view the

readings stored in memory.

When the memory symbol ( ) appears, first press

the button. Then while holding it down, press the

START/STOP button simultaneously for about 2 - 3

seconds.

Error Display Cause Remedy

Irregular heartbeats

are detected.

Remove the wrist cuff. Wait

2 - 3 minutes and then take

another measurement.

Repeat the steps in section

3.3. If this error continues to

appear, contact your doctor.

Movement during

measurement.

Carefully read and repeat the

steps in section 3.3.

Blink The batteries are

low.

You should replace them with

new ones ahead of time.

Refer to section 2.1.

Lit The batteries are

exhausted.

You should replace them with

new ones at once.

Refer to section 2.1.

Wrist cuff not

applied correctly.

Apply the wrist cuff correctly.

Refer to section 3.1.

Movement during

measurement.

Repeat Measurement while

remaining still and refraining

from talking during the

measurement.

Refer to section 3.3.

Wrist cuff not

applied correctly, or

movement during

measurement.

Apply the wrist cuff correctly

and repeat measurement

while remaining still and

refraining from talking during

the measurement.

Refer to section 3.1 and 3.3.

Device error. Contact your OMRON retail

outlet or distributor.

Alternating

date/time

display

First Second

4. Troubleshooting and Maintenance

Problem Cause Remedy

The reading is

extremely low

(or high).

The wrist cuff is not

at heart level.

Measure while in the

correct posture.

Refer to section 3.2.

The cuff is not

wrapped snugly

around the wrist.

Wrap the cuff correctly.

Refer to section 3.1.

The arms and

shoulders are

tense.

Relax and try taking the

measurement again.

Refer to section 3.3.

Movement or

talking during

measurement.

Remain still and do not

talk during Measurement.

Refer to section 3.3.

Wrist cuff pressure

does not rise.

Air is leaking from

the wrist cuff.

Consult your OMRON

retail outlet or distributor.

Wrist cuff deflates

too soon.

The wrist cuff is

loose.

Apply the cuff correctly so

that it is firmly wrapped

around the wrist. Refer to

section 3.1.

The blood pressure is different

each time. The reading is

extremely low (or high).

Blood pressure readings

constantly vary with time

of day and how relaxed

you are. Take several

deep breaths and try to

remain relaxed before

taking a measurement.

The unit loses

power during

measurement. The batteries are

exhausted.

Replace the batteries with

new ones.

Refer to section 2.1.

Nothing happens

when you press

the buttons.

The batteries have

been inserted

incorrectly.

Insert the batteries with

the correct (+/-) polarity.

Refer to section 2.1.

Produktspezifikationen

Marke:	Omron
Kategorie:	Blutdruckmessgerät
Modell:	RS3
Display-Typ:	LCD
Typ:	Automatisch
Unterstützung von Positionierung:	Handgelenk
Pulsfrequenzmessgerät:	Ja
Handschellengröße:	13.5 - 21.5 cm
Diastolischer Blutdurck:	Ja
Systolischer Blutdruck:	Ja
Speicherregister:	60