Olympus DP-201 Bedienungsanleitung

Olympus Sprachrekorder DP-201

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Olympus DP-201 (2 Seiten) in der Kategorie Sprachrekorder. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
``` ``` ```
```
a
b
c
d
```
a Current date
b Recording mode indicator
c Microphone sensitivity indicator
d Total number of recorded les
for the date
e Current le number
f Elapsed recording time
g Remaining recording time
a
b
c
d
e
f
g
```
VOICE RECORDER
NOTE CORDER DP-201
EN
INSTRUCTIONS
Thank you for purchasing an Olympus Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we recommend that
you test the record function and volume before use.
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan.
Tel. +81 (0)3-3340-2111
http://www.olympus.com
3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.
Tel. 1-888-553-4448
http://www.olympusamerica.com
Getting started
1Insert batteries. 2Turn on the power.
Slide the POWER switch to ON.
•
Be sure to remove the protective lm on the display before using this product.
To turn off the power:
While the recorder is in the stop mode, slide the POWER switch to
OFF/HOLD.
Power save mode:
If no operations are performed for more than 10 minutes when the
power is on, the display automatically turns off and the recorder enters
the power save mode. To exit the power save mode, press any button.
HOLD:
If sliding the POWER swich to OFF/HOLD while the recorder is in
operation, all buttons and switches are disabled without interrupt-
ing the current operations.
Strap eyelet
•
A strap is not supplied with this product.
Battery indicator:
If [ ]isdisplayedonthescreen,replacebatteriesassoonaspossible.Ifthe
battery level becomes too low, [ ]and[Battery Low] are displayed and then
therecorderautomaticallyturnsoff.
Set the time and date.
“Setting time and date” (Verso)
“Changing the recording mode” (Verso)
Recording indicator lights while recording.
Pause
Microphone sensitivity
Turn the microphone
toward a sound source to
be recorded.
High
Low
Highly sensitive mode which can record surround-
ing noises (

H
)
Standard sensitivity
(

L
)
• Toensuresuccessfulrecordings,werecommendyoutotestrecordingwiththeselected
functions and volume beforehand.
• To ensure recording from the beginning, start recording a sound source after the
recording indicator lights.
• Therecordercannotrecordif[
Memory Full]or[Maximum File Size is reached]is
displayed.Deleteunnecessarylestofreeupsomespaceinmemory.
• If the recorder is placed directly on a table, the vibrations of the table are likely to be
recorded.Torecordsoundclearly,placeanotebookorhandkerchiefbetweenthe
recorder and the table to prevent the vibrations from being recorded.
• When the available recording time becomes less than 60 seconds, the recording
indicatorstartsashing.Theindicatorashesfasteriftheavailabletimedecreasesto30
seconds and to 10 seconds.
Recording
Recording
• The [Set Time & Date] screen appears when you use the recorder for the rst time or when the recorder is turned on after more
than 30 minutes without power supply.
• If the time and date are not set, the time and date of the default settings are recorded to les .
a Recording date
b Current le number
c Elapsed playback time
d Playback position bar indicator
Forwarding and Rewinding
Changing the playback speed
Noise cancel
Fast
Slow
Noise Cancel indicator
On
Off
Noise is reduced when
played back to achieve
better sound quality.
When an earphone is connected, the speaker is turned
off. Playback sound for an earphone is monaural.
To avoid irritation to the ear, turn down
the volume before inserting an earphone.
Do not raise the volume too high when
using an earphone. It may cause hearing
impairment and a decrease in hearing
ability.
• An earphone is not supplied with
this product.
Volume
High
Low
File search
Recorder status
indicator
 : During playback

F
: During fast playback

S
: During slow playback
When the recorder is in
stop mode, press and
hold the STOP (/)but-
ton to display the [Time &
Date]and[Remain].
e Approximate le length
Playback
Playback
Press and hold
e
You can
change the
recording
mode!
To pause recording, press the REC (-)buttonwhile
recording. To resume the recording, press the REC (-)
button again.
• Recording is automatically stopped if 60
minuteselapsedafterrecordingispaused.
Select the sensitivity according to the surrounding conditions.
Recorded files are
grouped by date.
sTo fast-forward or rewind a le, press and hold 0or 9button while playing
back a le.
sTo skip to the next le or previous le, press 0or 9button.
sFast-forwarding or rewinding continues to the next le.
Playback speed is changed
between 0.5x, 0.75x, normal,
1.2x, 1.5x, and 2.0x by each
press of the buttons.
The file is played back as it
was recorded.
• When the NOISE CANCEL switch is set to ON,playback
speed returns to normal.
Search for files
by the date they
were recorded.
sWhen searching for a le recorded on October 15.
The date display
appears.
Select October 15. The first file is
played back.
If the file is skipped,
the recorder plays
back the next file.
U1-BS0952-01
TR1111
Introduction
• The contents of this document may be changed in the future without advanced
notice. Contact our Customer Support Center for the latest information relating
to product names and model numbers.
• The screen and recorder illustrations shown in this manual were produced during
the development stages and may differ from the actual product. The utmost care
hasbeentakentoensuretheintegrityofthecontentsofthisdocument.Inthe
unlikelyeventthataquestionableitem,error,oromissionisfound,pleasecontact
our Customer Support Center.
• Any liability for passive damages or damage of any kind occurred due to data loss
incurred by a defect of the product, repair performed by the third party other
than Olympus or an Olympus authorized service station, or any other reason is
excluded.
For customers in North and South America
USA RFI:
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
foraClassBdigitaldevice,pursuanttopart15oftheFCCRules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Canadian RFI:
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Cet appareil numĂŠrique ne dĂŠpasse pas les limites de CatĂŠgorie B pour les
émissions de bruit radio émanant d’appareils numériques, tel que prévu
dans les Règlements sur l’Interférence Radio du Département Canadien
des Communications.
Protective lm
``` ``` ``` ```
`
`
```
``` ``` ```
Setting time and date
Erase
Erase
Erase in Date
File Erase
Cancel
If [Cancel]isselectedand
the PLAY/OK (.)buttonis
pressed,therecorderreturns
to the stop mode.
File Erase Erase in Date
•
If no operations are performed for 8 seconds, the recorder returns to the stop mode.
• Itmaytakeformorethan10secondstocompletetheprocessing.Donotremove
batterieswhileprocessing.Thedatamaybecorrupted.
Check the battery level beforehand to ensure that that the batteries do not run out
while processing.
1Press SEARCH/
MENU for more
than 1 second.
2Press 0 or 9 to
highlight the item you
want to set.
Press 0or 9to set a date.
sThe clock will start from the set date and time.
Press the PLAY/OK (.) button according to
the time signal.
sCheck the time and date settings before using
the product again if it is left unused for long
periods of time.
Select
Set
Safe and proper usage
General precautions
• Do not leave the recorder in hot, humid locations such as inside
a closed automobile under direct sunlight or on the beach in the
summer.
• Do not store the recorder in places exposed to excessive moisture or
dust.
• Do not use organic solvents such as alcohol and lacquer thinner to
clean the unit.
• Do not place the recorder on top of or near electric appliances such
as TVs or refrigerators.
• Avoid recording or playing back near cellular phones or other
wireless equipment, as they may cause interference and noise. If
you experience noise, move to another place, or move the recorder
further away from such equipment.
• Avoid sand or dirt. These can cause irreparable damage.
• Avoid strong vibrations or shocks.
• Do not disassemble, repair or modify the unit yourself.
• Do not operate the unit while operating a vehicle (such as a bicycle,
motorcycle, or go-cart).
• Keep the unit out of the reach of children.
<Warning regarding data loss>
• Recorded content in memory may be destroyed or erased by
operating mistakes, unit malfunction, or during repair work.
• For important recorded content, we recommend you to write it down
some where.
• Any liability for passive damages or damage of any kind occurred due
to data loss incurred by a defect of the product, repair performed by
the third party other than Olympus or an Olympus authorized service
station, or any other reasons is excluded from Olympus’s liability.
Batteries
f Danger:
• Batteries should never be exposed to flame, heat, short-circuited or
disassembled.
• Never store batteries where they will be exposed to direct sunlight,
or subjected to high temperatures in a hot vehicle, near a heat
source, etc.
f Warning:
• Do not solder lead wires or terminals directly onto a battery or
modify it.
• Do not connect the =and -terminals together. This may cause fire,
overheating or electric shock.
• When carrying or storing the batteries, be sure to put them in the
provided case to protect their terminals. Do not carry or store the
batteries with any metal objects (such as key rings).
If this warning is not followed, fire, overheating or electric shock may
occur.
• Do not insert the batteries with their =and -terminals reversed.
• If any liquid from a battery gets into your eyes, promptly wash it off
with clean water and consult your doctor at once.
• Do not attempt to recharge alkaline, lithium or any other non-
rechargeable batteries.
• Never use any batteries with a torn or cracked outer cover.
• Keep batteries out of the reach of children.
• If you notice anything unusual when using this product such as
abnormal noise, heat, smoke, or a burning odor:
1 remove the batteries immediately while being careful not to burn
yourself, and;
2 call your dealer or local Olympus representative for service.
• Do not expose the batteries to water. Do not allow water to contact
the terminals.
• Do not remove or damage the batteries insulating sheet.
• Do not use the batteries if you find something wrong with them such
as leakage, color change or deformity.
• Unplug the charger if the charging is still incomplete after the
specified time it should take.
• Should any batteries liquid get on skin or clothing, promptly wash it
off with clean water.
• Keep batteries away from fire.
f Caution:
• Do not subject batteries to strong shocks.
• When using rechargeable batteries that have not been used for a
while, be sure to recharge them before use.
• Rechargeable batteries have a limited lifetime. When the operating
time becomes shorter even if the rechargeable battery is fully
charged under the specified condition, replace it with a new one.
Q1: The power cannot be turned on.
A1: • Batteries are exhausted.
• Batteries are inserted incorrectly.
Check = and - before inserting new batteries.
• Terminals are soiled.
Clean them with a dry cloth.
Q2: Nothing happens when a button is pressed.
A2: • The POWER switch is set to [OFF/HOLD] position.
Slide the POWER switch to the [ON] position.
Q3: No sound or quiet sound is heard from the speaker
while playing back.
A3: The earphone plug is plugged into the recorder.
The volume is set to the low level.
Q4: Recording is not possible.
A4: By pressing the
REC
(-) button:
• Check if the display shows [Memory Full].
• Check if the display shows [Maximum File Size is
reached].
Delete unnecessary files before recording. A maxi-
mum of 99 files can be recorded in a day.
Q5: The playback speed is too fast (slow).
A5: The recorder is set to fast (slow) Playback.
Use the
PLAY SPEED button to set to normal play-
back.
Troubleshooting
Specifications
Recording medium: Built-in flash memory (2GB)
Overall frequency: HQ mode: 70 to 7,900 Hz
SP mode: 70 to 4,700 Hz
Guide to recording times: HQmode:Approx.98h.
SP mode: Approx. 202 h.
Microphone: Electret Condenser Microphone (monaural)
Speaker: Built-in ø 36 mm round dynamic speaker
Maximum power: 180 mW
Earphone jack (monaural):
ø 3.5 mm diameter, impedance 8 Ί or more
Power supply:
Two AAA (LR03) batteries
Continuous battery: Guide to alkaline battery life
Recording mode HQ SP
During recording mode approx. 67 h. approx. 80 h.
During playback mode
(Built-in speakers)
approx. 21 h. approx. 21 h.
During playback mode
(Earphone)
approx. 45 h. approx. 49 h.
Dimensions: 95(L)mmx50(W)mmx18.2(T)mm
(without protrusions)
Weight: 78 g (including battery)
Operating temperature: 0°C - 42°C
• Battery life is measured by Olympus. It varies greatly according to the
type of batteries used and the conditions of use.
• Your recorded contents are for your personal use or pleasure only. It is
prohibited to record copyrighted material without permission of the
copyright holders according to copyright law.
• Specications and design are subject to change without notice for
improvement of performance.
To delete all files
recorded on a
specific date, press
the SEARCH/MENU
button to switch to
the date display.
Select the file you want to delete and stop playback beforehand.
Thenumberoffilestobe
deleted flashes.
Thedateofallthefilesto
be deleted flashes.
After deletion, files are
renumbered consecu-
tively, and the recorder
stops at the beginning of
the next file.
After deletion, the next
date with recorded files
available is displayed.
An erased
file cannot be
restored. Take care
when deleting
files.
Time & Date
Rec Mode
Language
Beep
3Confirm the
selection.
File management
will be easier by
setting the time
and date.
Recommended settings by recording condition
Recording condition Recommended settings
Rec Mode MIC SENSE
Dictation with a lot of
background noise.
[HQ]
(high quality
sound recording)
[LOW]
Recordings for lessons and
meetings.
[HQ]
(high quality
sound recording)
[HIGH]
Lengthy recordings. [SP]
(standard
recording)
[HIGH]
Changing the recording mode
Use the 0and 9buttonstoswitchrecordingmodes.
```
Changing the display language
Use the 0and 9buttons to select the display language.
Turning the beep On/Off
Use the 0and 9buttonstoturnthe
operating sound On/O.
```
```

Produktspezifikationen

Marke: Olympus
Kategorie: Sprachrekorder
Modell: DP-201

Brauchst du Hilfe?

Wenn Sie Hilfe mit Olympus DP-201 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sprachrekorder Olympus

Olympus

Olympus VN-900 Bedienungsanleitung

10 September 2024
Olympus

Olympus DM-770 Bedienungsanleitung

14 August 2024
Olympus

Olympus DM-720 Bedienungsanleitung

5 August 2024
Olympus

Olympus VN-3600 Bedienungsanleitung

5 August 2024
Olympus

Olympus DW-90 Bedienungsanleitung

3 August 2024
Olympus

Olympus VN-541PC Bedienungsanleitung

3 August 2024
Olympus

Olympus DS-150 Bedienungsanleitung

30 Juli 2024
Olympus

Olympus VN-90 Bedienungsanleitung

30 Juli 2024
Olympus

Olympus DS-9500 Bedienungsanleitung

29 Juli 2024
Olympus

Olympus VN-240PC Bedienungsanleitung

27 Juli 2024

Bedienungsanleitung Sprachrekorder

Neueste Bedienungsanleitung fĂźr -Kategorien-

Hikvision

Hikvision iDS-6716NXI-I/16S (B) Bedienungsanleitung

12 Oktober 2024
Hikvision

Hikvision DS-7716NI-I4(B) Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-7204HQHI-K1/A Bedienungsanleitung

10 Oktober 2024
Audioline

Audioline VR-C10 Bedienungsanleitung

7 Oktober 2024
Toshiba

Toshiba DVS16-480-2T Bedienungsanleitung

7 Oktober 2024
Toshiba

Toshiba IPS8-500G Bedienungsanleitung

3 Oktober 2024
Dahua Technology

Dahua Technology X21A3E Bedienungsanleitung

30 September 2024
Dahua Technology

Dahua Technology X24A3L Bedienungsanleitung

28 September 2024
Dahua Technology

Dahua Technology X28A5S Bedienungsanleitung

22 September 2024
Zoom

Zoom H1 XLR Bedienungsanleitung

21 September 2024