NewStar NS-431H Bedienungsanleitung
NewStar
Overige computer accessoire
NS-431H
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NewStar NS-431H (12 Seiten) in der Kategorie Overige computer accessoire. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
Table of Content
Table of Contents
Introduction
Overview………...…………………………………………..….1
Content….…………………………………………………..…..1
Features……………….………………………………………..2
Installations
PC BIOS Notice.……………………………………………….3
Adhesive Rubber Feet.…………………………………….….4
Console Connection……………….……………………..…...4
Computers Connection………………………………….…….4
Operations
Front Panel operation……………………………………...….7
OSD (On-Screen Display) Operation…………………….....8
Hot-Key Commands……………………………………….…13
Cascade Configuration
Connection…………………………………………...…..…...16
Computer Selection…..……………………………..…..…...16
Sun Keyboard Mapping……………………...……….…….17
Appendix
Specifications………………………………….………………18
Troubleshooting………………………..……...….…………..19
Please read this manual thoroughly and follow the
Installation procedures to prevent any damage to the NewStar
Switch or any connecting device.
This device is tested and complies with Part 15 of FCC/class B, CE
and VCCI rules.
1
-----------------
-----------------
-----------------
---------------------------------- Introduction
Overview
The hybrid USB and PS/2 KVM switches – NS431H, NS831HD, and
NS1631HD extend your computer management to either PS/2 and/or
USB models, or both from a single PS/2 console. With the
Sync-EmuTM Technology, the advanced NS831HD, and NS1631HD
are designed to meet the special requirements from USB-ready HP
Unit systems and Sun servers. Engineered for servers of the highest
level, the NS831HD, and NS1631HD guarantee flawless switching
with zero tolerance.
Installation is as easy as connecting USB A-B cables or PS/2 cables in
between computers and the NewStar switch. Selecting a computer is
as easy as front panel button pressing or by entering hotkey
commands. The innovated KVM technology ensures smooth switching
from one computer to the other and signal conversion from PS/2 to
USB. No more tangled cables and messy working environment; let the
NEWSTAR SWITCH switches do the computer switching for you.
NewStar Switch Content
KVM switch x 1
Power Adapter x 1
Foot Pad x 1 set
Bracket x 2 (optional)
User’s Manual x 1
PS/2 Y-Adapter x 4/6/12 for 4/8/16-port model
2
8-port KVM Switch configuration
Features
z Manage from 4 to 16 USB-enabled PCs, iMacs from one PS/2
keyboard, one mouse, and one monitor.
z For computer with USB or PS/2 interface.
z Front panel push-buttons for easy computer selection.
z Support keyboard and mouse Plug-and-Play.
z Buzzer sound for computer switching confirmation.
z High VGA resolution up to 1920*1440.
z Activate Auto Scan by front buttons pressing.
z USB specification compliant.
z Support the latest DDC2B VGA monitor.
z OSD menu for server naming and selection. (OSD Models only)
z Support USB-ready HP Unix and Sun servers. (OSD Models
only)
3
-----------------
-----------------
-----------------
---------------------------------- Installation
PC BIOS Notice
The following BIOS setup changes are necessary for PC users using
USB and not necessary for Mac users:
1. In STANDARD CMOS, set HALT ON ERROR to ALL BUT
KEYBOARD.
2. In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set
USB IRQ to ENABLED.
3. For newer computers: in INTEGRATED PERIPHERALS, set USB
CONTROLLER and KEYBOARD SUPPORT to ENABLED.
Also, make sure USB is properly selected in Device Manager under
Control Panel, as shown in Figure 1.
Figure 1: PC BIOS Notice
Note: For NS431H, switching from one computer to the other is
equivalent to unplugging the USB device from one computer
and plugging it to another. For certain computers neither
accept plug-and-play nor USB hub, the OSD models deal with
it by the advanced Sync-EmuTM Technology emulating USB
devices at all ports individually.
4
Adhesive Rubber Feet
For the desktop operation, you may stick the four round rubber feet
(supplied with the unit) to the bottom of the NewStar Switch. NOTE:
Give the rubber feet a firm press to the enclosure when applying them.
Do not use the rubber feet for rack mount operation.
Console Connection
Before installation, make sure all devices and computers to be
connected to the KVM switch have been turned off.
Plug a monitor to the Console's VGA port; connect a PS/2 mouse and
a keyboard to the port marked with a mouse and a CONSOLE
keyboard as shown in Figure 2.
Figure 2: Console Connection
Computers Connection
Use a HDB15 male-to-female cable to connect from a computer's
VGA output to VGA port of PC side, as shown in Figure 3, Figure 4,
and Figure 5.
For USB computer: Use a USB A-B cable to connect from one of
the PC ports to the USB port on the corresponding computer (A
connector, flat connector), as shown in Figure 3.
Produktspezifikationen
| Marke: | NewStar |
| Kategorie: | Overige computer accessoire |
| Modell: | NS-431H |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NewStar NS-431H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Overige computer accessoire NewStar
23 August 2024
16 August 2024
14 August 2024
12 August 2024
10 August 2024
10 August 2024
7 August 2024
7 August 2024
6 August 2024
Bedienungsanleitung Overige computer accessoire
- Overige computer accessoire Asus
- Overige computer accessoire Gembird
- Overige computer accessoire HP
- Overige computer accessoire Kensington
- Overige computer accessoire Manhattan
- Overige computer accessoire Maxxter
- Overige computer accessoire Sony
- Overige computer accessoire Targus
- Overige computer accessoire Zalman
- Overige computer accessoire Eminent
- Overige computer accessoire König
- Overige computer accessoire Pyle
- Overige computer accessoire Haier
- Overige computer accessoire Lenco
- Overige computer accessoire Onkyo
- Overige computer accessoire Icy Box
- Overige computer accessoire Lindy
- Overige computer accessoire Dell
- Overige computer accessoire Lenovo
- Overige computer accessoire Techly
- Overige computer accessoire D-Link
- Overige computer accessoire I-Tec
- Overige computer accessoire Digitus
- Overige computer accessoire Akasa
- Overige computer accessoire Kramer
- Overige computer accessoire Datalogic
- Overige computer accessoire Speed-Link
- Overige computer accessoire ProXtend
- Overige computer accessoire Ibm
- Overige computer accessoire Iomega
- Overige computer accessoire LaCie
- Overige computer accessoire AMX
- Overige computer accessoire Alienware
- Overige computer accessoire Siig
- Overige computer accessoire StarTech.com
- Overige computer accessoire Avocent
- Overige computer accessoire Aluratek
- Overige computer accessoire ATen
- Overige computer accessoire Vantec
- Overige computer accessoire Havis
- Overige computer accessoire DreamGEAR
- Overige computer accessoire Accell
- Overige computer accessoire Rocstor
- Overige computer accessoire Alogic
- Overige computer accessoire Apricorn
- Overige computer accessoire Satechi
- Overige computer accessoire Xcellon
- Overige computer accessoire Gamber-Johnson
- Overige computer accessoire C2G
- Overige computer accessoire Enhance
- Overige computer accessoire Micro Connect
- Overige computer accessoire IC Intracom
- Overige computer accessoire Henge Docks
- Overige computer accessoire VisionTek
- Overige computer accessoire Uncaged Ergonomics
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
18 September 2024
15 September 2024
11 September 2024
11 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024