Newland NQuire 201 Bedienungsanleitung
Newland
Barcode-Leser
NQuire 201
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Newland NQuire 201 (40 Seiten) in der Kategorie Barcode-Leser. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
Customer Information Terminal
User Manual
Version 1.0
NQuire 200 User Manual
© 2009, Fuijan Newland Computer Co., Ltd. All rights reserved.
This manual is copyrighted, with all rights reserved. Under the copyright laws, this manual
may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to
any electronic medium or machine readable form without prior written consent of Newland.
Limited Warranty: Under all circumstances this manual should be read attentively, before
installing and/or using the product. In no event shall Newland be liable for any direct,
indirect, special, consequential or incidental damages arising out of the use or inability to
use this documentation or product, even if advised of the possibility of such damages. In
particular, Newland shall not be liable for any hardware, software, or data that is stored or
used with the product, including the cost of repairing, replacing or recovering the above.
Newland reserves the right to change parts of the device at any time without preceding or
direct announcement to the client. Newland reserves the right to revise this manual, and
to make changes in the contents without obligation to notify any person or entity of the
revision or change. A serial number appears on the product. Make sure that this official
registration number has not been removed. It should be used whenever servicing by
Newland or an authorised Newland dealer is necessary.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to EN55022, and with the limits for a class A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the user’s manual, may cause harmful interference
to radio communications. Operation of the equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at
his own expense. Any unauthorised changes or modifications to this equipment could void
the user’s authority to operate this equipment. The NQuire is in conformity with the CE
standards. Please note that a Newland CE-marked power supply unit should be used to
conform to these standards.
Radio and/or television interference: Operation of this equipment in a residential area can
cause interference with radio or television reception. This can be determined by turning the
equipment off and on. The user is encouraged to try to correct the interference by one or
more of the following measures:
- Re-orientate the receiving antenna
- Relocate the devices with respect to the receiver
- Move the device away from the receiver
- Plug the device into a different outlet in order to have the device and receiver on
different branch circuits.
If necessary, the user should consult the manufacturer, an authorised Newland dealer or
experienced radio/television technician for additional suggestions.
Produktspezifikationen
Marke: | Newland |
Kategorie: | Barcode-Leser |
Modell: | NQuire 201 |
Gewicht: | 440 g |
Produktfarbe: | Black, Grey |
Betriebstemperatur: | -5 - 45 °C |
Relative Luftfeuchtigkeit in Betrieb: | 5 - 95 % |
Zertifizierung: | CE, FCC |
Display: | LCD |
Temperaturbereich bei Lagerung: | -20 - 55 °C |
Energieverbrauch: | 2000 mA |
Kompatible Betriebssysteme: | Linux Kernel 2.6.25 |
Abmessungen (BxTxH): | 140 x 60 x 140 mm |
Speicherkapazität: | 32 MB |
Eingangsspannung: | 12 V |
Eingebauter Prozessor: | ARM9 |
Standard-Schnittstellen: | RJ-45, Wireless LAN |
Sensor-Typ: | CCD |
Decodierung Standards: | Code128\nEAN-13\nEAN-8\nCode39\nUPC-A\nUPC-E\nGS1 Databar\nCodabar\nInterleaved 2/5\nChina post 25\nISBN/ISSN\nCode93 etc. |
Display-Auflösung: | 240 x 128 Pixel |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Newland NQuire 201 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Barcode-Leser Newland
6 September 2024
31 August 2024
31 August 2024
31 August 2024
16 August 2024
16 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
Bedienungsanleitung Barcode-Leser
- Barcode-Leser Approx
- Barcode-Leser Manhattan
- Barcode-Leser Trimble
- Barcode-Leser König
- Barcode-Leser Renkforce
- Barcode-Leser Nilox
- Barcode-Leser Motorola
- Barcode-Leser Olympia
- Barcode-Leser Garmin
- Barcode-Leser Casio
- Barcode-Leser Honeywell
- Barcode-Leser ELO
- Barcode-Leser Datamax-O'neil
- Barcode-Leser Intermec
- Barcode-Leser Zebra
- Barcode-Leser Digitus
- Barcode-Leser HTC
- Barcode-Leser Palm
- Barcode-Leser Deltaco
- Barcode-Leser IFM
- Barcode-Leser Datalogic
- Barcode-Leser DeLOCK
- Barcode-Leser ID-Tech
- Barcode-Leser Steren
- Barcode-Leser Posiflex
- Barcode-Leser Atlantis Land
- Barcode-Leser Brady
- Barcode-Leser Godex
- Barcode-Leser Socket Mobile
- Barcode-Leser Adesso
- Barcode-Leser Code
- Barcode-Leser Cypress
- Barcode-Leser QUIO
- Barcode-Leser Tecno
- Barcode-Leser Unitech
- Barcode-Leser Argox
- Barcode-Leser CipherLab
- Barcode-Leser Code Corporation
- Barcode-Leser Wasp
- Barcode-Leser Hamlet
- Barcode-Leser EC Line
- Barcode-Leser Vultech
- Barcode-Leser Psion
- Barcode-Leser Bluebird
- Barcode-Leser POS-X
- Barcode-Leser Mach Power
- Barcode-Leser Qoltec
- Barcode-Leser Koamtac
- Barcode-Leser DENSO
- Barcode-Leser Baracoda
- Barcode-Leser Qian
- Barcode-Leser IC Intracom
- Barcode-Leser POSline
- Barcode-Leser ZBA
- Barcode-Leser Opticon
Neueste Bedienungsanleitung für -Kategorien-
6 Oktober 2024
3 Oktober 2024
3 Oktober 2024
23 September 2024
22 September 2024
13 September 2024
13 September 2024
12 September 2024
6 September 2024
6 September 2024