Netgear XE102 Bedienungsanleitung

Netgear Powerline adapter XE102

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear XE102 (22 Seiten) in der Kategorie Powerline adapter. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/22

202-10114-01

June 2007

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

XE102 Wall-Plugged

Ethernet Bridge

User Guide

v1.0, June 2007

Trademarks

NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective

holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the products described in this document without notice. NETGEAR does not assume any liability that

may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Bestätigung des Herstellers/Importeurs

Es wird hiermit bestätigt, daß das XE102 Wall-Plugged Ethernet Bridge gemäß der im BMPT-AmtsblVfg 243/1991 und

Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschrifts Geräte (z.B. Testsender) mäßige Betreiben einiger

kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der Betriebsanleitung.

Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt

gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.

Certificate of the Manufacturer/Importer

It is hereby certified that the XE102 Wall-Plugged Ethernet Bridge has been suppressed in accordance with the

conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example,

test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the

notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market

and has been granted the right to test the series for compliance with the regulations.

v1.0, June 2007

iii

Product and Publication Details

Technical Support

See the support information card that shipped with your product. By registering your product at

http://www.netgear.com/register, we can provide you with faster expert technical support and

timely notices of product and software upgrades.

NETGEAR, INC. Support Information

Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support

information card.

E-mail: support@netgear.com

Web site: http://www.netgear.com

Model Number: XE102

Publication Date: June 2007

Product Family: Ethernet bridge

Product Name: XE102 Wall-Plugged Ethernet Bridge

Home or Business Product: Home

Language: English

Publication Part Number: 202-10114-01

Publication Version Number: 1.0

Produktspezifikationen

Marke:	Netgear
Kategorie:	Powerline adapter
Modell:	XE102
Gewicht:	224 g
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	0 - 45 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.3
Energiebedarf:	220V@ 50 Hz
Frequenzband:	0.0043 - 0.0209 GHz
Schnittstelle:	RJ-45
Kompatible Betriebssysteme:	Windows 98/ME/2000/XP
Abmessungen (BxTxH):	99.4 x 46.6 x 73 mm
Verkabelungstechnologie:	10Base-T(X)
Weitere Anschlüsse:	1x 10BASE-T Ethernet\n1x 14 Mbps Powerline
Elektromagnetische Interferenzen:	FCC Part 15 Class B
Maximale Strecke (indoors):	45 m²
Ethernet/LAN:	Ja