Netgear WNA1000 Bedienungsanleitung

Netgear WLAN-Hotspot WNA1000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear WNA1000 (58 Seiten) in der Kategorie WLAN-Hotspot. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/58

202-10575-01

August 2009

NETGEAR, Inc.

350 E. Plumeria Drive

San Jose, CA 95134 USA

NETGEAR Wireless-N

150 USB Adapter

WNA1000 User Manual

v1.0, August 2009

Technical Support

Please refer to the support information card that shipped with your product. By registering your product at

http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product

and software upgrades.

NETGEAR, INC. Support Information

Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.

E-mail: support@netgear.com

North American NETGEAR website: http://www.netgear.com

Trademarks

NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.

Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft Corporation.Other brand and

product names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specications

Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,

building materials and construction, and network overhead, lower actual data throughput rate.

Safety and Regulatory Notices

FCC Statement

The WNA1000 has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or devices

• Connect the equipment to an outlet other than the receiver’s

• Consult a dealer or an experienced radio/TV technician for assistance

v1.0, August 2009

iii

FCC Caution: Any change or modification to the product not expressly approved by Netgear could void the user’s

authority to operate the device.

FCC RF Radiation Exposure and SAR Statements

SAR Statement

The NETGEAR WNA1000 has been tested for body-worn Specific Absorption Rate (SAR) compliance. The FCC has

established detailed SAR requirements and has established that these requirements have been met while installed in host

notebook computer.

RF Exposure Information

The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the

requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency

devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest

SAR level measured for this device was 1.380 W/kg.

Canadian Department of Communications Industry Canada (IC) Notice

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de la classe B

est conforme à la norme NMB-003 et CNR-210 du Canada.

Industry Canada Statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

IMPORTANT NOTE: Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment. End users must follow the specific operating instructions for satisfying RF

exposure compliance. To maintain compliance with IC RF exposure compliance requirements,

please follow operation instruction as documented in this manual.

Europe - EU Declaration of Conformity

A printed copy of the EU Declaration of Conformity certificate for this product is provided in the WNA1000 product

package.

Èesky

[Czech]

NETGEAR, Inc. tímto prohlašuje, že tento NETGEAR Wireless-N 150 USB Adapter

WNA1000 je ve shodì se základními požadavky a dalšími pøíslušnými ustanoveními

smìrnice 1999/5/ES.

Dansk

[Danish]

Undertegnede erklærer herved, at følgende udstyr NETGEAR, Inc. NETGEAR Wireless-

N 150 USB Adapter WNA1000 overholder de væsentlige krav og øvrige relevante krav i

direktiv 1999/5/EF.

Produktspezifikationen

Marke:	Netgear
Kategorie:	WLAN-Hotspot
Modell:	WNA1000
Gewicht:	21.5 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabellos
Unterstützte Sicherheitsalgorithmen:	WPS
Betriebsanleitung:	Ja
Plug & Play:	Ja
Maximale Datenübertragungsrate:	150 Mbit/s
Kompatible Betriebssysteme:	Windows Vista, XP, 2000 SP4
Abmessungen (BxTxH):	27.7 x 86.7 x 13.3 mm
WLAN-Band:	Einzelband (2,4GHz)
Hostschnittstelle:	USB
Konformität mit Industriestandards:	IEEE 802.11b, IEEE 802.11g
USB:	Ja
Mindestsystemvoraussetzungen:	USB 1.1/2.0
Minimum Prozessor:	Intel Pentium 300 MHz