Netgear GS752TPP Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Netgear GS752TPP (115 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war fĂĽr 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/115
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
September 2021
202-12021-06
User Manual
24-Port and 48-Port Gigabit Ethernet PoE+
Smart Switches with 4 SFP Ports
GS728TPv2
GS728TPPv2
GS752TPv2
GS752TPP
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual2
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accĂ©der Ă ce document en français canadien Ă
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of
purchase within your return period.
Do not use this device outdoors. For products that support Power over Ethernet (PoE), the PoE source is intended
for intra building connection only.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil
platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while
flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
This switch is designed for indoor use only. If you want to connect to a device located outdoors, the outdoor device
must be properly grounded and surge protected, and you must install an Ethernet surge protector inline between
the switch and the outdoor device. Failure to do so can damage the switch.
WARNING: Before connecting this switch to outdoor cables or devices, see https://kb.netgear.com/000057103 for
safety and warranty information.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Revision History
Publication
Part Number
Publish Date Comments
202-12021-06 September 2021 We removed “Managed Pro” from the product name.
202-12021-05 August 2021 We changed Configure the CoS settings for an interface on page 301.
202-12021-04 April 2021 • We changed Chapter 1, Get Started to document the following:
- The new device UI login options for initial access to the device UI. (HTTP
rather than HTTPS is now the default protocol for access to the device UI.)
See Access the switch on-network and connected to the Internet, Access
the switch off-network and not connected to the Internet, and
Credentials for the device UI.
- The new options to register the switch to activate your warranty. See
Register the switch.
- The new requirements to change the management mode. See
Change the
management mode of the switch.
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual3
(continued)
202-12021-04
(continued)
April 2021
(continued)
• We changed the login steps in all tasks in the manual to document the new
device UI login options.
• We changed Manage the Smart Control Center.
• We added Browser security warning with HTTPS access.
• We changed Reset the switch to factory default settings and reset the
registration status.
• We made multiple minor changes, including changes in terminology.
202-12021-03 March 2020 • We changed Reboot the switch.
• We changed Reset the switch to its factory default settings and added the
following sections:
- Reset the switch to factory default settings but maintain the registration
status.
- Reset the switch to factory default settings and reset the registration
status.
202-12021-02 February 2020 • We changed the login procedures for all tasks, including the tasks for initial
access in Chapter 1, Get Started. After you register and access the switch
with your NETGEAR account, you now can access the switch with the
device admin password. You now can also obtain and use a registration key
for oine access.
• We changed Credentials for the device UI.
• We changed Register the switch and added two sections:
- Register the switch with your NETGEAR account and access the switch
online
- Register the switch with your NETGEAR account and get a registration
key for offline access
• We changed Reset the switch to its factory default settings.
• We added Use an HTTP session to download and install an SSL security
certificate file on the switch.
• We changed local browser interface to device UI.
202-12021-01 August 2019 • We changed the login procedures for all tasks. After you register and access
the switch with your NETGEAR account, you can now access the switch with
the device admin password.
• The switch now supports management through the NETGEAR Insight app
and Insight Cloud portal.
• We reorganized the information in Chapter 1, Get Started and added or
revised the following sections:
- Available publications
- Switch management options and default management mode
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- PoE Max LED in the Device View
- LED Mode LED in the Device View
Produktspezifikationen
| Marke: | Netgear |
| Kategorie: | Schalten |
| Modell: | GS752TPP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Netgear GS752TPP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalten Netgear
15 Oktober 2024
24 September 2024
24 August 2024
20 August 2024
16 August 2024
14 August 2024
13 August 2024
11 August 2024
7 August 2024
7 August 2024
Bedienungsanleitung Schalten
- Schalten Asus
- Schalten Belkin
- Schalten Hama
- Schalten HP
- Schalten LogiLink
- Schalten Manhattan
- Schalten Nedis
- Schalten Philips
- Schalten SilverCrest
- Schalten Panasonic
- Schalten Brennenstuhl
- Schalten Clas Ohlson
- Schalten Cotech
- Schalten Profile
- Schalten ZyXEL
- Schalten Bosch
- Schalten Yamaha
- Schalten Powerfix
- Schalten CSL
- Schalten Eminent
- Schalten Linksys
- Schalten König
- Schalten PCE
- Schalten Renkforce
- Schalten Trotec
- Schalten Schneider
- Schalten Rex
- Schalten Kaiser
- Schalten Vivanco
- Schalten Abus
- Schalten Elro
- Schalten Smartwares
- Schalten Tesla
- Schalten Perel
- Schalten Nexa
- Schalten Tork
- Schalten GEV
- Schalten Goobay
- Schalten Lindy
- Schalten Tripp Lite
- Schalten Ansmann
- Schalten Mercusys
- Schalten Marmitek
- Schalten Honeywell
- Schalten TRENDnet
- Schalten TP-Link
- Schalten Kathrein
- Schalten Flamingo
- Schalten Alcatel
- Schalten Tiptel
- Schalten Black Box
- Schalten Alpine
- Schalten Techly
- Schalten Ebode
- Schalten Theben
- Schalten Vacmaster
- Schalten GAO
- Schalten Hager
- Schalten Behringer
- Schalten Omnitronic
- Schalten Monoprice
- Schalten Ecler
- Schalten Monacor
- Schalten Huawei
- Schalten JUNG
- Schalten Victron Energy
- Schalten Ei Electronics
- Schalten Edimax
- Schalten Totolink
- Schalten D-Link
- Schalten Sylvania
- Schalten Audiovox
- Schalten B-Tech
- Schalten QNAP
- Schalten SPC
- Schalten Speaka
- Schalten Digitus
- Schalten Sygonix
- Schalten DataVideo
- Schalten Lancom
- Schalten LevelOne
- Schalten Merten
- Schalten APC
- Schalten Eberle
- Schalten Cisco
- Schalten Delta Dore
- Schalten Grässlin
- Schalten Tenda
- Schalten CyberPower
- Schalten Boss
- Schalten IFM
- Schalten Intertechno
- Schalten Elation
- Schalten Ubiquiti Networks
- Schalten Kramer
- Schalten Aeon Labs
- Schalten Intellinet
- Schalten Eaton
- Schalten AV:link
- Schalten Hikvision
- Schalten Vemer
- Schalten PreSonus
- Schalten Planet
- Schalten EnGenius
- Schalten Finder
- Schalten Mikrotik
- Schalten Shimano
- Schalten Homematic IP
- Schalten Berker
- Schalten Dormakaba
- Schalten Emerson
- Schalten Generac
- Schalten Intermatic
- Schalten KlikaanKlikuit
- Schalten Mercury
- Schalten Paladin
- Schalten Provision ISR
- Schalten Robbe
- Schalten SEC24
- Schalten Steren
- Schalten Suevia
- Schalten AMX
- Schalten Triax
- Schalten WHALE
- Schalten Vimar
- Schalten Cudy
- Schalten Siig
- Schalten Electro Harmonix
- Schalten RGBlink
- Schalten Iogear
- Schalten StarTech.com
- Schalten Smart-AVI
- Schalten Dahua Technology
- Schalten PAC
- Schalten Gefen
- Schalten Avocent
- Schalten Legrand
- Schalten Atlantis Land
- Schalten CYP
- Schalten H-Tronic
- Schalten ATen
- Schalten Axing
- Schalten KanexPro
- Schalten SmartAVI
- Schalten Advantech
- Schalten Kraus & Naimer
- Schalten Chacon
- Schalten Juniper
- Schalten Fibaro
- Schalten Phoenix Contact
- Schalten Audac
- Schalten OSD Audio
- Schalten Wentronic
- Schalten SunBriteTV
- Schalten BZBGear
- Schalten Crestron
- Schalten Kemo
- Schalten ORNO
- Schalten Extron
- Schalten Atlona
- Schalten Equip
- Schalten Heitronic
- Schalten Hamlet
- Schalten STI
- Schalten Matrox
- Schalten Blustream
- Schalten Vivolink
- Schalten Mach Power
- Schalten Ernitec
- Schalten Cambium Networks
- Schalten ConnectPro
- Schalten Micro Connect
- Schalten Intelix
- Schalten ICasa
- Schalten Maclean Energy
- Schalten Cooking Performance Group
- Schalten Flic
- Schalten Liberty
- Schalten Noark
- Schalten 2USB
- Schalten KVM-TEC
- Schalten Setti+
- Schalten PureLink
Neueste Bedienungsanleitung fĂĽr -Kategorien-
12 Oktober 2024
11 Oktober 2024
8 Oktober 2024
8 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
2 Oktober 2024