Netgear AirBridge WBC502B2 Bedienungsanleitung

Netgear WLAN-Repeater AirBridge WBC502B2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear AirBridge WBC502B2 (2 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Power adapter and power cord

(varies by region).

Package contents

Pole mounting strap Wall mount screws

and anchors

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

Logo are trademarks of NETGEAR, Inc. Any

non‑NETGEAR trademarks are used for reference

purposes only.

April 2020

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3,

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

Insight Instant

Wireless AirBridge

Model WBC502B2

Installation Guide

Insight Instant Wireless AirBridge

(Model WBC502)

This installation guide describes how to establish a WiFi bridge between two Insight

Instant Wireless AirBridge devices that are precongured for a point-to-point setup.

One AirBridge device is precongured as the master, the other one as the satellite.

You connect the AirBridge master to your wired network at the main site to provide

WiFi connectivity to the AirBridge satellite that you install at the detached site.

This point‑to‑point setup requires a line of sight between the AirBridge master at the

main site and the AirBridge satellite at the detached site.

AirBridge overview

1Power LED

2LAN1 LED: Power and network

3LAN2 LED: Ethernet device

4WLAN LED: WiFi connectivity

5Signal strength indicator LEDs

1. Prepare for installation

1Latch for bottom panel

Front view

Back view

1Reset button

2LAN1: PoE and network connectivity

3LAN2: Optional device for satellite only

Bottom view

1. Pull down on the latch on the front of the

device and remove the bottom panel of

the AirBridge to expose the ports.

2. Power on the AirBridge master

WARNING: Power on the AirBridge only with an Ethernet cable connected to the

provided power adapter, which must be placed indoors. Do not use any other

power source. The PoE port is not a standard PoE port. Using any other power

source can damage the device.

2. With the back of the AirBridge facing

you, connect an RJ‑45 Ethernet cable (not

provided) to the AirBridge 24V PoE port on

the right side of the device. Connect the

other end of the cable to the PoE port on

the power adapter.

3. Insert the plug into a power source.

All the LEDs light and then go off. The power LED stays lit.

Other AirBridge (WBC502) features:

• 2.4 GHz management SSID

• 5 GHz SSID extends your network

• Range of 1.8 miles (3 km) or more

This device must be professionally installed. It is

the installer’s responsibility to follow local country

regulations including operations within legal frequency

channels, output power and DFS requirements. Vendor

or Reseller or Distributor is not responsible for illegal

wireless operations. Please see Device’s Terms and

Conditions for more details.

1PoE port: Connect to AirBridge LAN1

2LAN port: Connect to the network

Installation guide

Screw placement guide

Model WBC502B2 is a bundle with one

precongured AirBridge master and

one precongured AirBridge satellite.

A label on the front of the AirBridge

shows whether the AirBridge is

precongured as a master or a satellite.

3. Connect the AirBridge master to the network

We recommend that you connect the AirBridge master to a network with Internet

access during setup. If the network includes a DHCP server, such as a router, the master

is automatically assigned a new IP address. (The default IP address is 192.168.0.100.)

1. Connect the LAN port on the power adapter to a LAN port on a switch or router

on your network. (Do connect the LAN2 port on the master directly to your not

network.)

2. Slide the bottom port cover onto the master until it latches.

3. Install the master to allow for a direct line of site to the detached location, facing

the location where you want to install the AirBridge satellite.

Master

Router Network

Power

adapter

Note: The power adapter and power

cord are not IP55 rated and must be

placed indoors. Because an Ethernet cable

supports a maximum length of 328 feet

(100 meters), you can place the AirBridge

outdoors but keep the power adapter and

power cord indoors.

5. Optional: Log in to the master and satellite

1. Install the AirBridge satellite at the detached location in such a way that the

satellite is in a direct line of sight to the master at the main site, and is facing the

master.

You can place the satellite at a distance of 1.8 miles (3 km) or more from the master.

2. Connect power to the satellite the same way you did for the master (see 2. Power

on the AirBridge master.

After the satellite establishes a WiFi connection with the master, the signal

strength indicator (SSI) LEDs light to indicate the strength of the signal for the WiFi

connection.

3. Use the SSI LEDs to adjust the position of the satellite for an optimal WiFi signal.

If the signal strength is weak or moderately good, make sure that you place the

satellite according to the following guidelines:

• Place the satellite at a higher location.

• Make sure that the satellite is in a direct, or near line of sight to the master at

the main site.

• Make sure that the front panel of the satellite is facing the front panel of the

master at the main site.

Note: You can use the NETGEAR Insight app to align the satellite. For more

information, see https://kb.netgear.com/000061678.

4. Install the AirBridge satellite

Support and Community

Visit netgear.com/support to get your

questions answered and access the

latest downloads.

You can also check out our NETGEAR

Community for helpful advice at

community.netgear.com.

For more information about Insight

Instant Mesh‑capable products, visit

netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada,

vous pouvez accéder à ce document

en français canadien à https://www.

netgear.com/support/download/.

(If this product is sold in Canada, you

can access this document in Canadian

French at https://www.netgear.com/

support/download/.)

For regulatory compliance information

including the EU Declaration of

Conformity, visit https://www.netgear.

com/about/regulatory/.

See the regulatory compliance

document before connecting the

power supply.

For NETGEAR’s Privacy Policy, visit

https://www.netgear.com/about/

privacy-policy.

By using this device, you are agreeing

to NETGEAR’s Terms and Conditions

at https://www.netgear.com/about/

terms-and-conditions. If you do not

agree, return the device to your place

of purchase within your return period.

Other supported modes

Other supported operation modes

for the AirBridge include point‑to‑

multipoint master‑to satellite, access

point, and client bridge. For more

information, see the user manual at

netgear.com/support/product/WBC502.

Insight Premium and Insight Pro

subscribers can use the Insight Cloud

portal to change or manage the point‑

to‑point master‑to‑satellite setup. For

more information, see the NETGEAR

Knowledge Base.

Green LED Right SSI LED solid green. The signal for the WiFi connection is

strong. The left and middle SSI LEDs are off.

Amber LED Middle SSI LED solid amber. The signal for the WiFi connection

is moderately good. The left and right SSI LEDs are off.

Red LED Left SSI LED solid red. The signal for the WiFi connection is

weak. The middle and right SSI LEDs are off.

SSI LEDs off All SSI LEDs off. No WiFi connection is established or the signal

strength cannot be determined.

Note: By default, the management mode of the precongured AirBridges is local

browser UI. You can change the management mode so that you can use NETGEAR

Insight to manage the conguration for a point-to-point setup between a master and a

satellite. For more information, visit https://www.netgear.com/support/product/insight.aspx.

We recommend that you log in to the local browser UI of the master rst.

1. Connect your mobile device or computer to the same network where you

connected the AirBridge master or satellite.

2. Enter the IP address of the AirBridge.

If you don’t know the IP address of the AirBridge, use the NETGEAR Insight app or

another discovery method.

Your browser might display a security message. Ignore it or add an exception.

The page adjusts to show the Day Zero Easy Setup settings.

3. In the AP Login New Password eld, specify a new local device password for the

AirBridge, and conrm the password.

4. In the Management WPA2 Passphrase eld, specify a new passphrase for WiFi

management access only.

5. Click the button.Apply

Your settings are saved and the WiFi link might need to be reestablished.

6. Log in with the user name admin and the new local device password that you just

specied, and agree to the Terms of Use.

You can now change or manage the AirBridge settings using the local browser UI.

Line of sight

Single device or

extended network

Master Satellite

Network

4. Test the network connectivity by doing one of the following:

• Connect a computer to the LAN2 port on the satellite.

• Connect a WiFi access point to the LAN port on the satellite’s power adapter

and then connect a WiFi client to the access point.

At the detached site, if you can access the network at the main site and the

Internet, the WiFi connection functions.

6. Register your devices in NETGEAR Insight

1. On your mobile device, visit the Apple App Store or Google Play Store, search for

NETGEAR Insight, and download the latest version of the app.

2. Open the NETGEAR Insight app on your mobile device.

3. If you do not own a NETGEAR account, tap Create NETGEAR Account and follow

the onscreen instructions.

4. Enter the email address and password for your account and tap .LOG IN

5. Tap in the upper right corner.+

6. Either use the camera on your phone to scan the bar code, or type in the serial

number.

7. Follow the instructions on screen to register the device.

Produktspezifikationen

Marke:	Netgear
Kategorie:	WLAN-Repeater
Modell:	AirBridge WBC502B2
WLAN:	Ja
Breite:	186 mm
Tiefe:	100 mm
Gewicht:	504 g
Produkttyp:	Netzwerkbrücke
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP55
Übertragungstechnik:	Verkabelt & Kabellos
Höhe:	29 mm
Energiequelle:	PoE
Betriebstemperatur:	-20 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Eingebauter Ethernet-Anschluss:	Ja
Schnittstellentyp Ethernet-LAN:	Gigabit Ethernet
Zertifizierung:	FCC / ISED, CE
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Stromverbrauch (max.):	8.93 W
Menge pro Packung:	2 Stück(e)
Maximale Datenübertragungsrate:	867 Mbit/s
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Antenne Zunahmeniveau (max):	14 dBi
Anzahl der Antennen:	1
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 80 °C
Luftfeuchtigkeit bei Lagerung:	0 - 90 %
Top WLAN-Standard:	Wi-Fi 5 (802.11ac)
WLAN Datentransferrate (max.):	867 Mbit/s
Antennen-Design:	Intern
Reset-Knopf:	Ja
Wandmontage:	Ja
Maximal mögliche Übertragungsstrecke:	3000 m
Modulation:	16-QAM, 64-QAM, 256-QAM, BPSK, QPSK
Datenrate:	802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)
Temperatur Betriebsumgebung:	-4 - 140 °F
Power over Ethernet (PoE) Spannung:	24 V
Druckanstiegsschutz:	Ja
Signalstärke:	23 dbm