NEC GT6000R Bedienungsanleitung

NEC Beamer GT6000R

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr NEC GT6000R (5 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war fĂĽr 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
NEC Solutions (America), Inc.
Visual Systems
GT6000R Installation Guide
With 1.0:1 Rear Lens v1.5
Contents
Product Description, Lens Specs, Notes and Formulas Page 1
Diagrams and Distance Charts Page 2
Cabinet Dimensions
Top, Front and Right Side Page 3
Bottom, Back and Left Side Page 4
Control Codes Page 5
Product Description
Type: 3 panel LCD/Dual Lamp Projector Dimensions: 20.4”(W) x 9.5”(H) x 21.8”(D)
1.4” p-Si TFT w/MLA Weight: 41.7 lbs (w/GT10RLB lens)
Native Resolution: 1400x1050 (SXGA+) Brightness: 1000 ANSI single lamp / 2000 ANSI dual lamp
Network Ready, integrated wired network adapter Power Focus
Lens Specifications
GT10RLB Throw Ratio: 1.0:1(approx.) Focal Length: 28.9mm
Screen Sizes: 40”-250” F/#: 2.4
Note: Lens shift is not available on the GT10RLB rear lens. The GT6000R should be used only for “zero degree/no-offset” rear
projection applications.
Note: There are no other optional lenses available for the GT6000R. The GT6000R ships from the factory with the GT10RLB lens.
Notes
• For screen sizes not indicated on the projection charts, use the formulas below.
• If a value in a chart does not match the results of the formulas, use the values in the chart.
• The ceiling must be strong enough to support the projector and the installation must be in accordance with any local
building codes.
• All formulas are based on a 4:3 aspect ratio and screen.
• 4:3 sources can be displayed on a 16:9 screen without vertical “squeezing”, see “Aspect Ratio” in the user manual.
• The replacement lamp for the GT6000R is the long life lamp GT60LPS only.
• Distances are in inches, for millimeters multiply by 25.4.
• ±Distances may vary 5%.
Formulas (for a 4:3 screen)
Units: Inches (for millimeters multiply final number by 25.4)
Definitions:
Projection Formula: H = Horizontal Screen Width (4:3)
C = 1.0034H – 2.087 V = Vertical Screen Height (4:3)
C = Throw Distance
Screen Formulas:
H = Screen Diagonal x 4/5
V = Screen Diagonal x 3/5
Screen Diagonal = H x 5/4
Note: Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%.
www.necvisualsystems.com GT6000R Page 1 of 5
Rear Projection Setup
The following diagram shows the relationship between projector position and the screen. Refer to the chart below for data.
Distances are in inches. For millimeters multiply by 25.4.
Screen Ctr
Throw Distance
5.3"
C
Throw Angle 0°/No Offset
Note: Lens shift is not available on the GT10RLB rear lens. The GT6000R should be used only for “zero degree/no-offset” rear
projection applications.
Note: Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%.
Distance Chart (for popular 4:3 screen sizes)
Throw Distance
Rear Lens
GT10RLB
Diagonal Width(H) Height (V) 1.0:1
inches inches inches inches
40 32 24 30.0
60 48 36 46.1
67 53.6 40.2 51.7
72 57.6 43.2 55.7
80 64 48 62.1
84 67.2 50.4 65.3
90 72 54 70.2
100 80 60 78.2
120 96 72 94.2
150 120 90 118.3
180 144 108 142.4
210 168 126 166.5
240 192 144 190.6
250 200 150 198.6
Screen Size (4:3)
Note: For screen sizes not indicated on the projection chart, use the formulas on page 1.
www.necvisualsystems.com GT6000R Page 2 of 5
Cabinet Dimensions
The following drawings show cabinet dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.
Air outlet
Air outlet
20.39
0.669 21.57
8.86
4.65
7.48
7.91
3.05
-+
6000R
GT
www.necvisualsystems.com GT6000R Page 3 of 5


Produktspezifikationen

Marke: NEC
Kategorie: Beamer
Modell: GT6000R

Brauchst du Hilfe?

Wenn Sie Hilfe mit NEC GT6000R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer NEC

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung fĂĽr -Kategorien-