Neato Robotics Botvac D6 Connected Bedienungsanleitung

Neato Robotics Staubsauger Botvac D6 Connected

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Neato Robotics Botvac D6 Connected (44 Seiten) in der Kategorie Staubsauger. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
QUICK
START
Start Here | | Commencez ici Comience aquí Comincia qui | | Jetzt loslegen | Begin hier
Start her Start her | | Aloita tästä | Börja här
1 BEFORE BEGINNING
To operate correctly, remove all protective films and shipping
material from the robot and charge base.
Have your smartphone / tablet available.
You will need your wifi network name and password.
TIP: Locate your router in a central location where it
can deliver a strong signal throughout the house.
2 SET UP CHARGE BASE
Plug the power cord
securely into the
charge base.
Adjust the length of
the cord by wrapping it as shown.
3 INITIAL ROBOT CHARGING
Place the rounded side
of your Neato robot
against the metal
charging contacts on
the charge base until
the contacts are
pushed all of the way in.
For best results, charge the robot fully before your first cleaning cycle.
NOTE: During bootup, the robot LEDs next to the Start Button
will alternately blink blue. You will need to wait for an audible tone
before performing additional functions.
NOTE: Your robot is only compatible with the included charge base.
4 ACCESSING THE NEATO APP
Download the Neato app on your smartphone / tablet
Open the Neato app and create a Neato account
TIP: If you have an existing Neato account, you can just sign in
Upon setting up your account, you will be sent a verification
email. You must go to your email and verify it before proceeding
to the next step.
Sign in to the Neato app
Follow steps in the Neato app to CONNECT YOUR ROBOT
TIP: Your robot is in pairing mode for the first 60 minutes after
you turn on your robot for the rst time.
Choose a wall outlet that has a 3’ (1 m)
clearance on both sides and in front
of the charge base. This helps your
robot find the charge base.
Plug in the power cord and push
the charge base against the wall.
TIP: Locate the charge base on a hard floor surface.
TIP: Make sure the power outlet is not controlled by a switch.
Charging Contacts
Connecting Your Robot
ENGLISH


Produktspezifikationen

Marke: Neato Robotics
Kategorie: Staubsauger
Modell: Botvac D6 Connected

Brauchst du Hilfe?

Wenn Sie Hilfe mit Neato Robotics Botvac D6 Connected benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Staubsauger Neato Robotics

Bedienungsanleitung Staubsauger

Neueste Bedienungsanleitung für -Kategorien-