Motorola MBP622 Bedienungsanleitung

Motorola Babyphone MBP622

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Motorola MBP622 (30 Seiten) in der Kategorie Babyphone. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/30

User’s Guide

Digital Video Baby Monitor

Models: MBP622, MBP622-2, MBP622-3, MBP622-4

The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...

to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing this Baby Monitor. Now you can see and hear your

baby sleeping in another room or you can monitor your older children in their

playroom.

Please retain your original dated sales receipt for your records. For

warranty service of your Motorola product, you will need to provide a copy

of your dated sales receipt to confirm warranty status. Registration is not

required for warranty coverage.

For product related questions, please call:

This User's Guide provides you with all the information you need to get the

most from your product.

Before you can use the baby monitor, we recommend you insert and fully

charge the battery in the Parent Unit, so that it continues to work if you

disconnect it from the power supply to carry it to another location. Please

read the Safety Instructions on pages 7 - 9 before you install the units.

Got everything?

• 1 x Parent Unit

• 1 x Baby Unit (camera)

• 1 x Rechargeable Ni-MH battery pack for the Parent Unit

• 1 x Power adapter for the Parent Unit

• 1 x Power adapter for the Baby Unit

In multi-camera packs, you will find one or more additional camera units

with power adapter units.

US and Canada 1-888-331-3383

Email: support@motorolamonitors.com

On the Web: www.motorolamonitors.com

POWER

Overview of the Parent Unit

1. Display (LCD screen)

Up/Volume+ Button

Press to increase sound volume.

Press to scroll up menu options/

settings.

Press to tilt up in zoom mode.

Down/Volume- Button

Press to decrease sound volume.

Press to scroll down menu options/

settings.

Press to tilt down in zoom mode.

4. Return Button

Press to return to previous menu level.

Press to pan left in zoom mode.

5. Switch Camera Button

Press to switch between Camera

Units. (If paired with more than one

Camera)

Press to pan right in zoom mode.

6. Zoom Button

Press once to switch to 2X Zoom

mode.

Press again to return to normal mode

(1X).

7. Menu/OK Button

Press to open the menu options.

Press to confirm a selection.

8. Power indicator LED (Blue)

when connected to the power

supply.

9. Unit ON/OFF LED (Green)

10. Audio Level LED (Green, Orange,

Red, Red)

11. Power / Video On-Off Button P

Press and hold to switch the Unit

ON or OFF.

In monitor mode, press to turn the

LCD screen ON/OFF.

12. Battery compartment cover

13. Stand

14. Speaker

15. Power Adapter Socket

Parent Unit menu icons

Signal Level Indication (3 Levels)

No signal from the Baby Unit - out of range or turned off

Night Vision Mode (Video also changes to Black/White)

Battery Level Indication (4 Levels)

Volume Level Control (8 Levels + Off)

Brightness Level Control (8 Levels)

Alarm Setting (6h, 4h, 2h, OFF)

Select Camera to view

Add Camera

Delete Camera

Camera scan mode set

Zoom Select - icon displays when in Zoom (2X) mode.

Overview of Your Baby Unit

Important guidelines for installing your Baby Monitor

• To use your Video Monitor Baby and the Parent Unit together, you must be

able to establish a radio link between them, and the range may be affected

by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic

doors or reinforced concrete between the Baby and Parent Units may block

the radio signal.

• The signal strength may also be reduced by other solid structures, like walls

or electrical equipment, such as radios, TVs, computers, cordless or mobile

phones, fluorescent lights or dimmer switches.

• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers),

Bluetooth® systems, or microwave ovens, may cause interference with this

product, so keep the Baby Monitor at least 5 feet (1.5 meters) from these

types of products, or turn them off if they appear to be causing interference.

• If the signal is weak, try moving the Parent and/or the Baby Unit to different

positions in the rooms.

1. Photo Sensor (Night Vision Mode) 6. Power Adapter Socket

2. Camera Lens 7. Pair Key

3. Infrared LEDs (8) 8. Microphone

4. Power LED

5. ON/OFF Switch

Table of contents 6

ENGLISH

Table of contents

1. Safety Instructions .....................................................................................7

2. Getting Started........................................................................................10

2.1 Baby Unit Power Supply............................................................................10

2.2 Parent Unit Battery Installation ..................................................................10

2.3 Parent Unit Power Supply .........................................................................11

2.4 Registration (Pairing)................................................................................. 13

3. Using the Baby Monitor...........................................................................14

3.1 Setting Up..................................................................................................14

3.2 Night Vision Mode.....................................................................................14

3.3 Video ON/OFF..........................................................................................14

4. Parent Unit Menu Options....................................................................... 15

4.1 Volume.......................................................................................................15

4.2 Brightness ..................................................................................................15

4.3 Zoom, Pan and Tilt.....................................................................................15

4.4 Alarm..........................................................................................................15

4.5 Camera Control ........................................................................................16

4.5.1 Add (Pair) a camera ...................................................................16

4.5.2 View a Camera ..........................................................................16

4.5.3 Delete a Camera .......................................................................17

4.5.4 Scan the Cameras ..................................................................... 17

5. Disposal of the Device (environment)....................................................18

6. Cleaning ..................................................................................................18

7. Help..........................................................................................................19

8. General Information ................................................................................22

Safety Instructions 7

ENGLISH

1. Safety Instructions

WARNING

Strangulation Hazard: Children have

STRANGLED in cords. Keep this cord

out of the reach of children (more than

3ft (

) away). Do not remove this tag.

Never use extension cords with AC

Adapters. Only use the AC Adapters

provided.

8 Safety Instructions

WARNING

This Baby Monitor is compliant with all relevant standards regarding

electromagnetic fields and is, when handled as described in the User's Guide,

safe to use. Therefore, always read the instructions in this User's Guide carefully

before using the device.

• Adult assembly is required. Keep small parts away from children when

assembling.

• This product is not a toy. Do not allow children to play with it.

• This Baby Monitor is not a substitute for responsible adult supervision.

• Keep this User's Guide for future reference.

• Do not place the Baby Unit or cords in the crib or within reach of the baby

(the Unit and cords should be more than 3 feet away).

• Keep the cords out of reach of children.

• Do not cover the Baby Monitor with a towel or blanket.

• Test this monitor and all its functions so that you are familiar with it prior to

actual use.

• Do not use the Baby Monitor in damp areas or close to water.

• Only use the chargers and power adapters provided. Do not use other

chargers or power adapters as this may damage the device and battery pack.

• Only insert a battery pack of the same type.

CAMERA SET UP & USE:

• Determine a location for the Baby Unit that will provide the best view

of your baby in his/her crib.

• Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf

or mount the Unit to a wall securely using the keyhole slots in the

underside of the stand.

• NEVER place the Baby Unit or cords within the crib.

10 Getting Started

2. Getting Started

2.1 Baby Unit Power Supply

1. Insert the small plug of the Power Adapter into the socket at the back of the

Baby Unit (Camera) and plug the other end into a suitable electrical outlet.

NOTE

Only use the enclosed Power Adapter (6V DC / 500mA) with the slightly larger

DC plug.

2. Slide the ON/OFF switch to the ON position. The power LED will light up

in green.

3. Slide the ON/OFF switch to the OFF position to switch off the Baby Unit.

2.2 Parent Unit Battery Installation

The supplied rechargeable battery pack should be fitted so that the Parent Unit

can be moved without losing the link with the Camera. Charge the battery in the

Parent Unit before using it for the first time or when the Parent Unit indicates the

battery is low.

1. Insert the plug of the rechargeable battery pack into the small socket inside

the battery compartment as shown above and fit the battery pack into the

compartment, with the wires pushed carefully alongside.

Black

Red

Getting Started 11

ENGLISH

2. Place the battery cover over the compartment and gently tighten the

screw in a clockwise direction using a small cross-head or flat-head

screwdriver.

2.3 Parent Unit Power Supply

IMPORTANT

Installing the rechargeable battery pack and charging it fully before use is

recommended. This will allow the Parent Unit to operate on battery in the event

of a power failure, or when moving to a different room.

1. Insert the small plug of the Power Adapter into the socket in the side of the

Parent Unit and plug the other end into a suitable electrical outlet. Only use

the enclosed Power Adapter (6V DC/500mA) with the slightly smaller DC

plug.

2. Press and hold the POWER ON/OFF button P on the side of the Parent

Unit to turn in ON.

3. Once the Baby and Parent Units are both switched ON, the display on the

Parent Unit will show the video captured by the Baby Unit.

Small cross-head or flat-head

screwdriver.

12 Getting Started

4. If there is no connection or you are out of range, the video display will go

off, the symbol will flash on the LCD screen, and the unit will beep

every 9 seconds. (If the unit is on scan the

1 ?

symbol displays.)

Move the Parent Unit closer to the Baby Unit to re-establish the link.

5. Press and hold the POWER ON/OFF button P until the progress bar

scrolls across fully, to turn OFF the Parent Unit.

NOTE

The battery icon will turn Red, flash, and the Parent Unit will beep about

every 15 seconds to indicate that the battery is low and needs to be recharged.

The battery pack will take approximately 16 hours to charge fully.

When charging

1. If the Parent Unit is turned OFF when the Adapter is plugged in, it displays

the "Power Adapter" icon briefly, followed by a large battery icon with

internal segments cycling for 60 seconds, before the display goes blank.

Note that the Unit will continue to charge. The Blue LED at the top left

corner will light up to indicate that the Adapter is plugged in.

2. If the Parent Unit is turned ON when the Adapter is plugged in, the battery

icon in the screen’s top right corner will show that the battery is charging

by cycling the internal segments. The segments stop cycling when the

battery is fully charged. The Blue LED at the top left corner will light up to

indicate that the Adapter is plugged in.

Getting Started 13

ENGLISH

2.4 Registration (Pairing)

The Baby Monitor Camera is pre-registered to your Parent Unit. You do not

need to register it again unless the Baby Unit loses its link with the Parent Unit.

To re-register your Baby Unit, or register a new Baby Unit, follow the procedure

below:

1. Press the button on the Parent Unit and then press the - DOWN button

to select the ADD CAMERA icon , and press the button to confirm.

will pop up, press the + UP button or - DOWN button to

select the desired Camera identification number and press the button to

start searching for a Camera Unit. The Green Audio Level LED turns on

while searching.

3. Press and hold the PAIR button under the bottom left edge of the Camera

Unit until the Parent Unit finds the Camera, beeps and the video from the

Camera appears.

NOTE

If the Parent Unit already has cameras registered, they are indicated by a * next

to the identification number, and you will have to delete that registration (see

4.5.3 on page 17) before you can register another camera to that number.

If a Camera Unit is not found within about 30 seconds, the search will end and

the Parent Unit will return to its previous mode.

14 Using the Baby Monitor

3. Using the Baby Monitor

3.1 Setting Up

• Make sure the Baby Unit and Parent Unit are both switched on.

• Place the Baby Unit in a convenient location (e.g. on a table) and point the

camera lens towards the area you want to monitor.

• Adjust the Baby Unit’s head angle by rotating the camera up, down, left and

right until you are satisfied with the image on the Parent Unit.

NOTE

Do not place the Baby Unit within reach of a child or baby(s)! If there is

interference with the picture or sound, try moving the units to different locations,

and ensure they are not close to any other electrical equipment.

3.2 Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in

the dark. When the built-in photo sensor on the top of the unit detects a low level

of ambient light, the LEDs will automatically activate and the screen on the

Parent Unit will display in black and white. The N icon will be displayed at the top

of the screen.

3.3 Video ON/OFF

You can turn off the Parent Unit screen without switching off the Parent Unit.

When the screen is turned off, you can still hear sounds from the Baby Unit.

Press the POWER ON/OFF button P on the right side of the Parent Unit to

turn the LCD screen on or off, but still leave the audio monitor on.

NOTE

When the screen is off, press any button to turn the screen back on.

Parent Unit Menu Options 15

ENGLISH

4. Parent Unit Menu Options

4.1 Volume

1. While in monitor mode, press the + UP button or - DOWN button to

select the desired volume level from level 1 ~ 8, or Off. (The default volume

level setting is level

4.)

4.2 Brightness

1. Press the button and the first menu option will appear.

2. Press the button to select the BRIGHTNESS icon .

3. Press the + - UP button or DOWN button to select the desired brightness

level from level 1 ~ 8. (The default brightness level setting is level 4.)

4. Press the button twice to return to the Monitor mode or the device will

automatically return to the monitor mode after 10 seconds.

4.3 Zoom, Pan and Tilt

1. Press the Zoom button to select 1X or 2X Zoom. (The default setting is

1X.) When in 2X

Zoom mode the icon is displayed, and the functions of

the + UP, - DOWN, < > LEFT and RIGHT buttons are changed to

allow you to view different areas of the original 1X

video screen.

2. When in the 2X Zoom mode, press the + - UP button or DOWN button

to move up or down the display view, or press the

< LEFT and RIGHT >

buttons to pan the display left or right.

3. Press the ZOOM button to return to normal mode.

4.4 Alarm

1. Press the button and the first menu option will appear.

2. Press the - DOWN button to show the ALARM icon and press the

button to select.

3. Press the + - UP button or DOWN button to select the alarm time

(

). (The default setting is Alarm OFF (X).)

If an alarm time is selected, the Parent Unit will beep at the end of the

selected 2, 4 or 6 hour period, and the alarm icon will flash red. The alarm is

cancelled after 60 seconds or by pressing any button on the Parent Unit.

Set the alarm again if you want another alarm call.

16 Parent Unit Menu Options

4.5 Camera Control

4.5.1 Add (Pair) a camera

1. Press the button and the first menu option will appear.

2. Press the - DOWN button three times to show the ADD CAMERA icon

and press the button to select.

will pop up, press the + UP button or - DOWN button to

select the desired Camera Unit, and press the button to start searching

for a Camera Unit. The Green Audio Level LED turns on while searching.

4. Press and hold the PAIR button under the bottom left edge of the Baby Unit

until the Parent Unit finds the camera, beeps and the picture from the

Camera appears.

NOTE

A Camera can only be registered to one Parent Unit at any one time.

If the Parent Unit already has cameras registered, they are indicated by a * next

to the identification number, and you will have to delete that registration (see

4.5.3 on page 17) before you can register another camera to that number.

4.5.2 View a Camera

1. Press the button.

2. Press the - DOWN button twice to show the VIEW CAMERA icon

and press the button to select.

/ will pop up, press the DOWN button + UP button or -

to select the desired Camera unit, and press the button to view the

picture from that Camera.

TIP

Quick Method to View Cameras instead of using the menu.

Directly press repeatedly to select

or .

NOTE

Cameras registered to the Parent Unit are indicated by a * next to the

identification number, and only these can be selected for viewing.

Parent Unit Menu Options 17

ENGLISH

4.5.3 Delete a Camera

1. Press the button.

2. Press the - DOWN button four times to show the DELETE CAMERA icon

and press the button to select.

will pop up, press the + UP button or - DOWN button to

select the desired Camera unit, press the button then press the -

DOWN button to select the DELETE CAM icon .

4. Press the button to confirm the deletion or RETURN button to exit.

NOTE

You cannot delete a Camera if it is the only Camera paired in the system.

4.5.4 Scan the Cameras

1. Press the button.

2. Press the - DOWN button twice to show the VIEW CAMERA icon

and press the button to select.

3. Press the - DOWN button to select the SCAN CAMERA symbol and

press the button to confirm.

4. The screen will then display images from each registered Camera in a

loop, changing once about every 10 seconds.

TIP

Quick Method to View Cameras instead of using the menu.

Directly press repeatedly to select

or .

NOTE

If the Parent Unit is in scan mode and one of the registered Cameras is turned

off or out of range, the scan will stop at the missing Camera (e.g. camera 3) and

display the

3 ?

icon while emitting a warning beep every 8 seconds.

WARNING

Check the Camera and correct the fault immediately if you are using that

Camera to monitor your baby.

If you want to continue in camera scan mode without that Camera, delete the

Camera (see 4.5.3 Delete a Camera) and start the scan again.

18 Disposal of the Device (environment)

5. Disposal of the Device (environment)

At the end of the product’s life cycle, you should not dispose of

this product with normal household waste. Take this product to

a collection point for the recycling of electrical and electronic

equipment. The symbol on the Product, User’s Guide and/or

box indicates this.

Some of the product materials can be reused if you take them to

a recycling point. By reusing some parts or raw materials from used products

you make an important contribution to the protection of the environment.

Please contact your local authorities in case you need more information on the

collection points in your area.

Dispose of the battery pack in an environmentally-friendly manner according to

your local regulations.

6. Cleaning

Clean the Baby Monitor with a slightly damp or anti-static cloth.

Never use cleaning agents or abrasive solvents.

Cleaning and care

• Do not clean any part of the product with thinners or other solvents and

chemicals –- this may cause permanent damage to the product which is not

covered by the Warranty.

• Keep your Baby Monitor away from hot, humid areas or conditions, strong

sunlight and avoid moisture.

• Every effort has been made to ensure high standards of reliability for your

Baby Monitor. However, if something does go wrong, please do not try to

repair it yourself – contact Customer Service for assistance.

Produktspezifikationen

Marke:	Motorola
Kategorie:	Babyphone
Modell:	MBP622
Bildschirmdiagonale:	2.4 "
Eingebautes Mikrofon:	Ja
Produktfarbe:	Grey, White
Energiequelle:	AC
Frequenzband:	2.4 GHz
Schnittstelle:	WLAN
Nachtmodus:	Ja
LED Typ:	IR
Maximale Reichweite:	160 m
Anzahl der Beleuchtungs-LEDs:	8
Nachtlicht:	Ja