Monacor TWS-DIMA/SW Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Monacor TWS-DIMA/SW (5 Seiten) in der Kategorie Oordopje. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/5
D Hinweis zur Inbetriebnahme
Entfernen Sie die transparente Schutzfolie von den Ladekontakten an der Unterseite
beider Headsets und stellen Sie sicher, dass diese nicht im Ladeetui stecken.
Platzieren Sie die Headsets in das Ladeetui und drücken Sie die
Power-Taste am Ladeetui, um den Ladeprozess zu beginnen.
Sollte die LED am Ladeetui nicht leuchten bzw. der
Ladeprozess nicht starten, verbinden Sie das Ladeetui
bitte mit dem Micro-USB-Ladekabel und dem USB-A-
Stecker des Kabels mit einer USB-Stromquelle.
Die roten LEDs der Headsets leuchten während
des Ladevorgangs und erlöschen, sobald sie
voll aufgeladen sind.
GB Note for initial use
Remove the transparent protective fi lm from the
charging contacts on the underside of both head-
sets and make sure that they are not in the charging
case. Place the headsets in the charging case and
press the Power button on the charging case to start
the charging process. If the LED on the charging case
does not light up or the charging process does not start,
please connect the charging case to a USB power source using
the Micro-USB charging cable and the USB A plug of the cable.
The red LEDs on the headsets light up during the charging process and go out as soon
as they are fully charged.
Wireless headset „Dima“
Nach Entnahme der Headsets aus der Ladeschale werden die Headsets
automatisch eingeschaltet.
Nach Einlegen der Headsets in der Schale schalten sich diese automatisch aus.
Manuelles Ausschalten erfolgt durch Drücken der Multifunktionstaste (2) für ca. 8
Sekunden.
Pairing
Sobald beide Headsets aus der Ladeschale entnommen werden (beide gleichzeitig)
schalten sie sich ein und es erfolgt automatisch eine Verbindung zwischen den
beiden Headsets (TWS). Eines der Beiden Headsets wird rot und blau blinken, es
ist bereit für das Pairing mit dem Smartphone.
1. Erstes Pairing
Aktivieren Sie Bluetooth® auf Ihrem Smartphone und suchen Sie nach verfügbaren
Bluetooth®-Geräten. Wählen Sie „ “ aus der Liste der gefundenen Dima
Bluetooth®-Geräte und bestätigen Sie die Verbindung mit „ “. Nach erfolgtem Dima
Pairing, blinken die LEDs beider Headsets blau.
2. Weitere Verbindungen, wenn einmal gepairt
Sobald Sie die Headsets aus der Ladeschale herausnehmen, verbinden sich beide
Headsets miteinander. Danach erfolgt automatisch die Verbindung mit dem
Smartphone.
Hinweis: Für eine Verbindung zwischen Headset und Smartphone muss
Bluetooth® auf dem Smartphone aktiviert sein.
Hinweis: Um ein Headset einzeln zu verwenden, schalten Sie anstatt beider
Headsets nur eines ein und verbinden dies mit Ihrem Smartphone.
Freisprechfunktionen
Mit und dem integrierten Mikrofon und der intelligenten Rauschunterdrückung ist
das Fontastic® Dima Headset perfekt zum Telefonieren geeignet.
Musiksteuerung
Play/Pause: Einmal kurz die Multifunktionstaste (2) drücken, Play oder Pause
wird aktiviert.
Nächster Titel: Drücken Sie während Musik abgespielt wird für ca. 4 Sekunden
die Multifunktionstaste (2) des linken Headsets.
Vorheriger Titel: Drücken Sie während Musik abgespielt wird, für ca. 4 Sekunden
die Multifunktionstaste (2) des rechten Headsets.
Hinweis zum Umweltschutz:
Gemäß der europäischen Richtlinie 2012/19 EU gilt folgendes: Elektrische
und elektronische Gerä
Der Verbraucher ist ge
Geräte an den dafür ei
Verkaufsstelle zurückzugeben
Mit der Wiederverwertung von
Schutz unserer Umwelt.
Improvement and changes of the technical specifi cations and other data’s could be made without prior notice. Fontastic, by D-Parts M
headsets.
Switching on/off
Switch on: as soon as you take off the headset from its charger, it will switch on.
Switch off : Once the headsets are placed in the charging power case they will
switch off and disconnect with the Smartphone.
Note: You can also switch off the headsets manually by pressing and holding the
multifunction button (2) for around 8 seconds.
Pairing
The Fontastic Headset must be paired with a BluetoothDima ® device before use.
Remove the headsets from the charging power case. The two headsets will
automatically switch on and pair together. Activate Bluetooth
® of your Smartphone
and search for “ ” and connect your Smartphone with it. Pairing procedure is Dima
completed and the headset is ready to use.
Note: Diff erent mobile phones may require diff erent pairing methods.
Note: If the connection is lost or the transmitter is temporarily disconnected,
Fontastic® Dima automatically tries to restore the connection.
If the connection cannot be restored after 3 seconds, try again by pressing the
multifunction button (2) on one of the headsets or in using your Smartphones
Bluetooth® settings.
Note: Once the pairing procedure is successfully done and the Dima is shown
in the Smartphones Bluetooth® list, the headset will automatically connected to the
Smartphone without the need to manually reconnect or pair it again.
Hands-free features
With its built-in microhone and intelligent noise reduction, the Fontastic
® Dima
headset is perfectly suitable to make phone calls.
Music streaming
Start music streaming on the Smartphone which is paired with Fontastic
® Dima.
The music is transferred to the Headsets.
• Battery: Headset 40mAh, battery case 350mAh
• Operation time: at 70% Volume up to 3x 4.5 hrs.
• Weight: Headset 4.3g, battery case 28.4g
• Dimensions: Headset 22x11x
Registration and Safety
We hereby declare that this de
regulations and standards.
It complies with the fundamen
Note on environmental p
After the implementatio
national legal system, t
may not be disposed o
law to return electrical
to the public collecting points
this are defi ned by the nationa
product, the instruction manua
these regulations. By recycling
devices, you are making an im
Improvement and changes of the technical specifi cations and other data’s could be made without prior notice. Fontastic, by D-Parts M
Produktspezifikationen
Marke: | Monacor |
Kategorie: | Oordopje |
Modell: | TWS-DIMA/SW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Monacor TWS-DIMA/SW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Oordopje Monacor
11 August 2024
Bedienungsanleitung Oordopje
- Oordopje Samsung
- Oordopje 3M
- Oordopje Basetech
- Oordopje Belkin
- Oordopje HP
- Oordopje HyperX
- Oordopje Audio-Technica
- Oordopje Logitech
- Oordopje Manhattan
- Oordopje Nedis
- Oordopje NGS
- Oordopje Philips
- Oordopje SilverCrest
- Oordopje Sony
- Oordopje Trust
- Oordopje LG
- Oordopje Roland
- Oordopje Renkforce
- Oordopje Thomson
- Oordopje Blaupunkt
- Oordopje Aukey
- Oordopje AfterShokz
- Oordopje Aiwa
- Oordopje AKG
- Oordopje Bang And Olufsen
- Oordopje Beats
- Oordopje Bose
- Oordopje Bowers And Wilkins
- Oordopje Denon
- Oordopje Edifier
- Oordopje Jabra
- Oordopje Jaybird
- Oordopje JBL
- Oordopje JVC
- Oordopje KEF
- Oordopje Klipsch
- Oordopje Krüger And Matz
- Oordopje Meliconi
- Oordopje Motorola
- Oordopje Sennheiser
- Oordopje Shure
- Oordopje Skullcandy
- Oordopje Soundcore
- Oordopje Xiaomi
- Oordopje Yurbuds
- Oordopje Orava
- Oordopje TCL
- Oordopje Livoo
- Oordopje Imperial
- Oordopje Sencor
- Oordopje Plantronics
- Oordopje VXi
- Oordopje Avanca
- Oordopje Enermax
- Oordopje Scosche
- Oordopje SBS
- Oordopje Karma
- Oordopje Zebra
- Oordopje Alpine
- Oordopje Adidas
- Oordopje Mackie
- Oordopje Energy Sistem
- Oordopje Altec Lansing
- Oordopje Cobra
- Oordopje Swissonic
- Oordopje JAZ Audio
- Oordopje BlackBerry
- Oordopje Tracer
- Oordopje Fresh 'n Rebel
- Oordopje Ultimate Ears
- Oordopje JLab
- Oordopje Galaxy Audio
- Oordopje Kicker
- Oordopje Nuance
- Oordopje House Of Marley
- Oordopje Fostex
- Oordopje AT&T
- Oordopje Cellular Line
- Oordopje Amazfit
- Oordopje LD Systems
- Oordopje Vorago
- Oordopje Google
- Oordopje BlueAnt
- Oordopje Shokz
- Oordopje GlobalSat
- Oordopje Happy Plugs
- Oordopje IHome
- Oordopje ILive
- Oordopje Jam
- Oordopje Jawbone
- Oordopje Libratone
- Oordopje Logic3
- Oordopje Maxell
- Oordopje Media-tech
- Oordopje Mtx Audio
- Oordopje Paradigm
- Oordopje Sharper Image
- Oordopje Steren
- Oordopje WAGAN
- Oordopje Master & Dynamic
- Oordopje Monster
- Oordopje Polsen
- Oordopje DB Technologies
- Oordopje MEE Audio
- Oordopje Arctic Cooling
- Oordopje V-Moda
- Oordopje JAYS
- Oordopje Nura
- Oordopje MusicMan
- Oordopje Etymotic
- Oordopje GOgroove
- Oordopje Avantree
- Oordopje Armodd
- Oordopje Rolls
- Oordopje BlueParrott
- Oordopje The T.bone
- Oordopje ANT
- Oordopje GMB Audio
- Oordopje CAD Audio
- Oordopje Music Hero
- Oordopje JK Audio
- Oordopje Thone
- Oordopje Deltaco Gaming
- Oordopje Wicked Audio
- Oordopje Nothing
- Oordopje Xvive
- Oordopje Ifrogz
- Oordopje Fischer Amps
- Oordopje Final
- Oordopje Mobvoi
- Oordopje Sudio
- Oordopje Treblab
- Oordopje Sygonix Connect
- Oordopje EarFun
- Oordopje Munitio
- Oordopje Thunderz
- Oordopje Erato
- Oordopje Zolo
- Oordopje H2O Audio
- Oordopje EKSA
- Oordopje Future Sonics
- Oordopje Aminy
- Oordopje VAVA
Neueste Bedienungsanleitung für -Kategorien-
7 Oktober 2024
7 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
27 September 2024
23 September 2024
21 September 2024