Monacor ETS-210TW/WS Bedienungsanleitung

Monacor Lautsprecher ETS-210TW/WS

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung für Monacor ETS-210TW/WS (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS
ETS-210TW/ WS Bestell-Nr. Order No. 16.2940•
ETS-220TW/ WS Bestell-Nr. Order No. 16.2950•
ETS-240TW/ WS Bestell-Nr. Order No. 16.2960•
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright© by MONACOR INTERNATIONAL. All rights reserved. A-1858.99.02.07.2018
PA Speaker Column
These instructions are intended for installers
with specific knowledge in 100 V PA tech-
nology. Please read the instructions carefully
prior to installation and keep them for later
reference.
1 Applications
The speaker column has been specially designed
for PA systems operating with 100 V technology.
Designed as a two-way system, it is suitable for
speech and music reproduction. Due to its weather-
proof aluminium profile housing, the speaker
column can also be used for outside applications
(IP rating: IP 66).
2 Safety Notes
The speaker column corresponds to all relevant di-
rectives of the EU and is therefore marked with .
•
Protect the speaker column against extreme tem-
peratures. The admissible ambient temperature
range is –20 °C to +50 °C.
•
For cleaning only use a soft cloth, dry or slightly
wet; never use chemicals or aggressive detergents.
•
No guarantee claims for the speaker column and
no liability for any resulting personal damage or
material damage will be accepted if the speaker
column is used for other purposes than originally
intended or if it is not correctly installed.
If the speaker column is to be put out
of operation definitively, take it to a local
recycling plant for a disposal which is not
harmful to the environment.
3 Installation
The column speaker is provided with two brackets
and screws with dowels. Find a suitable location
and screw on the speaker column in an expert
manner.
IMPORTANT Always use both brackets to ensure
safe installation!
WARNING During operation, there is a hazard
of contact with a dangerous voltage
of up to 100 V at the speaker cable.
Installation must be made by skilled
personnel only.
1) Prior to making any electrical connection, switch
off the PA amplifier so that the speaker cable will
not carry any voltage.
2) Use the connection terminals to connect the
speaker column to the 100 V audio cable of the
PA amplifier:
Model ETS-210TW/ WS ETS-220TW/ WS ETS-240TW/ WS
Core colour
Rated power / Impedance
black common connection (e. g. negative pole)
brown 0.63 W / 16 kΩ 2.5 W / 4 kΩ 5 W / 2 kΩ
red 1.25 W / 8 kΩ 5 W / 2 kΩ 10 W / 1 kΩ
orange 2.5 W / 4 kΩ 10 W / 1 kΩ 20 W / 500 Ω
grey 5 W / 2 kΩ 15 W / 667 Ω 30 W / 333 Ω
white 10 W / 1 kΩ 20 W / 500 Ω 40 W / 250 Ω
WARNING Always insulate the cores that are not
used. During operation, there is a hazard of contact
with dangerous voltage at these cores.
3) -When connecting multiple speakers to the am
plifier, make sure that all speakers have the same
polarity (e. g. black core = negative pole) and do
not overload the amplifier: The total load of the
speakers must not exceed the amplifier power.
An overload may damage the amplifier!
4) Finally, align the speaker column in an optimum
way to the speaker zone.
Subject to technical modification.
ELA-LautsprechersƤule
Diese Anleitung richtet sich an Installateure
mit Fachkenntnissen in der 100-V-Beschal-
lungstechnik. Bitte lesen Sie die Anleitung vor
der Installation gründlich durch und heben Sie
sie für ein späteres Nachlesen auf.
1 Verwendungsmƶglichkeiten
Die Lautsprechersäule ist speziell für den Einsatz
in ELA-Anlagen konzipiert, die mit 100-V-Technik
arbeiten. Sie ist als 2-Wege-System ausgeführt und
eignet sich sowohl für Sprach- als auch für Musik-
wiedergabe. Durch das wetterfeste Aluminium-
Profilgehäuse kann die Lautsprechersäule auch im
Außen bereich eingesetzt werden (Schutzart IP 66).
2 Hinweise für den sicheren Gebrauch
Die LautsprechersƤule entspricht allen relevanten
Richt linien der EU und trƤgt deshalb das -Zei-
chen.
•
Schützen Sie die Lautsprechersäule vor extremen
Temperaturen. Der zulƤssige Einsatztemperaturbe-
reich betrƤgt āˆ’20 °C bis +50 °C.
•
Verwenden Sie für die Reinigung nur ein tro-
ckenes oder angefeuchtetes, weiches Tuch, auf
keinen Fall Chemikalien oder aggressive Reini-
gungsmittel.
•
Wird die LautsprechersƤule zweckentfremdet
oder nicht fachgerecht installiert, kann keine
Haftung für daraus resultierende Sach- oder Per-
sonenschäden und keine Garantie für die Laut-
sprechersäule übernommen werden.
Soll die Lautsprechersäule endgültig aus
dem Betrieb genommen werden, überge-
ben Sie sie zur umweltgerechten Entsor-
gung einem ƶrtlichen Recyclingbetrieb.
3 Installation
Zur Montage liegen zwei Winkel und Schrauben
mit Dübeln bei. Die Lautsprechersäule an geeigne-
ter Stelle fachgerecht anschrauben.
WICHTIG Zur sicheren Montage unbedingt beide
Winkel verwenden!
WARNUNG Im Betrieb liegt berührungsgefähr-
liche Spannung bis 100 V an der
Lautsprecherleitung an. Die Instal-
lation darf nur durch Fachpersonal
erfolgen.
1) Vor dem elektrischem Anschluss den ELA-Ver-
stƤrker ausschalten, damit die Lautsprecherlei-
tung spannungsfrei ist!
2) Die Lautsprechersäule über Anschlussklemmen
an die 100-V-Audioleitung vom ELA-VerstƤrker
anschließen:
Modell ETS-210TW/ WS ETS-220TW/ WS ETS-240TW/ WS
Aderfarbe Nennleistung / Impedanz
schwarz gemeinsamer Anschluss (z. B. Minuspol)
braun 0,63 W / 16 kΩ 2,5 W / 4 kΩ 5 W / 2 kΩ
rot 1,25 W / 8 kΩ 5 W / 2 kΩ 10 W / 1 kΩ
orange 2,5 W / 4 kΩ 10 W / 1 kΩ 20 W / 500 Ω
grau 5 W / 2 kΩ 15 W / 667 Ω 30 W / 333 Ω
weiß 10 W / 1 kΩ 20 W / 500 Ω 40 W / 250 Ω
WARNUNG Isolieren Sie unbedingt die unbenutz-
ten Adern. An ihnen liegt im Betrieb berührungs-
gefƤhrliche Spannung an.
3) Beim Anschluss von mehreren Lautsprechern an
den VerstƤrker darauf achten, dass alle gleich
gepolt werden (z. B. schwarze Ader = Minuspol)
und den Verstärker nicht überlasten: Die Summe
der Leistungen aller Lautsprecher darf die Ver-
stärkerleistung nicht überschreiten. Eine Über-
lastung kann den VerstƤrker beschƤdigen!
4) Zuletzt die LautsprechersƤule optimal auf den zu
beschallenden Bereich ausrichten.
Ƅnderungen vorbehalten.
DeutschEnglish
Technische Daten Specifications ETS-210TW/ WS ETS-220TW/ WS ETS-240TW/ WS
Nennleistung bei 100 V Power rating at 100 V 10 / 5 / 2,5 / 1,25 / 0,63 W 20 / 15 / 10 / 5 / 2,5 W 40 / 30 / 20 / 10 / 5 W
Kennschalldruck (1 W/1 m) SPL (1 W/1 m) 86 dB 89 dB 90 dB
Frequenzbereich Frequency range 170 – 20 000 Hz 150 – 20 000 Hz 150 – 20 000 Hz
Anzahl Breitband-LS / Hochtƶner No. of full-range speakers / tweeters 2 + 1 4 + 2 8 + 4
Schutzart IP rating IP 66 IP 66 IP 66
Einsatztemperatur Ambient temperature –20 °C … +50 °C –20 °C … +50 °C –20 °C … +50 °C
Abmessungen (B H Dimensions (W H D) 80 Ɨ 280 Ɨ 70 mm 80 Ɨ 469 Ɨ 70 mm 80 Ɨ 846 Ɨ 70 mmƗ Ɨ T) Ɨ Ɨ
Gewicht Weight 1 kg 1,7 kg 2,8 kg
Anschluss Connection abisolierte Kabelenden • Stripped cable ends
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright© by MONACOR INTERNATIONAL. All rights reserved. A-1858.99.02.07.2018
Colonna sonora PA
Queste istruzioni sono rivolte agli installatori
con conoscenze specifiche della tecnica 100 V
di sonorizzazione. Vi preghiamo di leggerle
attentamente prima dell’installazione e di
tenerle per un uso futuro.
1 PossibilitĆ  d’impiego
La colonna sonora ĆØ prevista in modo particolare
per l’impiego in impianti PA che funzionano con la
tecnica a 100 V. ƈ realizzata come sistema a 2 vie ed
ĆØ adatta per la riproduzione sia della lingua parlata
che della musica. Grazie al contenitore di allumi-
nio profilato, resistente alle intemperie, la colonna
sonora può essere usata anche all’esterno (grado i
protezione IP 66).
2 Avvertenze per l’uso sicuro
La colonna sonora ĆØ conforme a tutte le direttive
rilevanti dell’UE e pertanto porta la sigla .
•
Proteggere la colonna sonora dalle temperature
estreme. La temperatura d’esercizio ammessa ĆØ
āˆ’20 °C a +50 °C.
•
Per la pulizia usare solo un panno morbido, asciutto
o leggermente inumidito; non impiegare in nessun
caso prodotti chimici o detergenti aggressivi.
•
Nel caso d’uso improprio o d’installazione non a
regola d’arte della colonna sonora, non si assume
nessuna responsabilitĆ  per eventuali danni con-
sequenziali a persone o a cose e non si assume
nessuna garanzia per la colonna sonora
Se si desidera eliminare la colonna sonora
definitivamente, consegnarla per lo smal-
timento ad unā€˜istituzione locale per il
riciclaggio.
3 Installazione
Per il montaggio sono in dotazione due angoli e
viti con tasselli. Avvitare a regola d’arte la colonna
sonora in un punto adatto.
IMPORTANTE Per un montaggio sicuro usare asso-
lutamente entrambi gli angoli!
AVVERTIMENTO Durante il funzionamento, nel
cavo dell’altoparlante ĆØ presente
una tensione fino a 100 V, perico-
losa in caso di contatto. Lā€˜instal-
lazione deve essere eseguita solo
da personale specializzato.
1) -Prima del collegamento elettrico spegnere l’am
plificatore PA per togliere la tensione dal cavo
dell’altoparlante!
2) Collegare la colonna sonora con i contatti audio
100 V dell’amplificatore PA usando dei morsetti
di collegamento:
Modello ETS-210TW/ WS ETS-220TW/ WS ETS-240TW/ WS
Colore
conduttore Potenza nominale / Impedenza
nero Contatto comune (p. es. polo negativo)
marron 0,63 W / 16 kΩ 2,5 W / 4 kΩ 5 W / 2 kΩ
rosso 1,25 W / 8 kΩ 5 W / 2 kΩ 10 W / 1 kΩ
arancione
2,5 W / 4 kΩ 10 W / 1 kΩ 20 W / 500 Ω
grigio 5 W / 2 kΩ 15 W / 667 Ω 30 W / 333 Ω
bianco 10 W / 1 kΩ 20 W / 500 Ω 40 W / 250 Ω
AVVERTIMENTO Isolare assolutamente i condut-
tori non usati. Durante l’uso portano una tensione
pericolosa in caso di contatto.
3) Collegando più altoparlanti con l’amplificatore
far attenzione che tutti abbiano la medesima po-
laritĆ  (p. es. conduttore nero = polo negativo) e
di non sovraccaricare l’amplificatore: La somma
delle potenze di tutti gli altoparlanti non deve
superare la potenza dell’amplificatore. Il sovrac-
carico può danneggiare l’amplificatore!
4) Alla fine orientare la colonna sonora in modo
ottimale verso la zona da sonorizzare.
Con riserva di modifiche tecniche.
ETS-210TW/ WS RĆ©f. num. Codice 16.2940•
ETS-220TW/ WS RĆ©f. num. Codice 16.2950•
ETS-240TW/ WS RĆ©f. num. Codice 16.2960•
Colonne sonore Public Adress
Cette notice s’adresse aux installateurs possĆ©dant
des connaissances spécifiques en sonorisation
ligne 100 V. Veuillez lire la prƩsente notice avec
attention avant l’installation et conservez-la pour
pouvoir vous y reporter ultƩrieurement.
1 PossibilitĆ©s d’utilisation
La colonne sonore est spƩcialement conƧue pour
une utilisation dans des installations de Public
Adress fonctionnant en 100 V. Il s’agit d’un systĆØme
2ī˜voies et elle est trĆØs bien adaptĆ©e pour la restitu-
tion de discours et de musique. Grâce au boîtier en
profilĆ© d’aluminium Ć©tanche, la colonne peut ĆŖtre
utilisƩe en extƩrieur (protection IP 66).
2 Conseils d’utilisation
La colonne sonore rƩpond Ơ toutes les directives
nĆ©cessaires de l’Union europĆ©enne et porte donc
le symbole .
•
ProtƩgez la colonne sonore des tempƩratures
extrêmes. La plage de température autorisée est
de –20 °C Ć  +50 °C.
•
Pour le nettoyage, utilisez un tissu sec ou légère-
ment humidifié et doux, en aucun cas de produits
chimiques ou produits de nettoyage agressifs.
•
Nous dƩclinons toute responsabilitƩ en cas de
dommages matƩriels ou corporels rƩsultants si la
colonne sonore est utilisƩe dans un but autre que
celui pour lequel elle a Ć©tĆ© conƧue ou si elle n’est
pas correctement installƩe, en outre, la garantie
deviendrait caduque.
Lorsque la colonne sonore est définitivement
retirƩe du service, vous devez la dƩposer
dans une usine de recyclage adaptƩe pour
contribuer Ơ son Ʃlimination non polluante.
3 Installation
Pour le montage, deux Ʃtriers et vis avec chevilles
sont livrĆ©s. Vissez la colonne Ć  l’endroit adĆ©quat.
IMPORTANT Pour garantir un montage sƻr, veillez
Ơ utiliser les deux Ʃtriers !
AVERTISSEMENT
Pendant le fonctionnement, une
tension dangereuse jusqu’à 100 V
est présente sur le câble haut-
parleur. Seul un personnel qua-
lifié peut effectuer l’installation.
1) Eteignez l’amplificateur Public Adress avant d’ef-
fectuer le branchement Ʃlectrique pour que le
câble haut-parleur ne soit pas porteur de tension.
2) -Reliez la colonne sonore via les bornes de bran
chement au cĆ¢ble audio 100 V de l’amplificateur
Public Adress :
ModĆØle ETS-210TW/ WS ETS-220TW/ WS ETS-240TW/ WS
Couleur
conducteur Puissance nominale / ImpƩdance
noir branchement commun (p. ex. pƓle moins)
marron 0,63 W / 16 kΩ 2,5 W / 4 kΩ 5 W / 2 kΩ
rouge 1,25 W / 8 kΩ 5 W / 2 kΩ 10 W / 1 kΩ
orange 2,5 W / 4 kΩ 10 W / 1 kΩ 20 W / 500 Ω
gris 5 W / 2 kΩ 15 W / 667 Ω 30 W / 333 Ω
blanc 10 W / 1 kΩ 20 W / 500 Ω 40 W / 250 Ω
AVERTISSEMENT Isolez impƩrativement les conduc-
teurs non utilisƩs. Une tension dangereuse est prƩ-
sente sur ces conducteurs pendant le fonctionnement.
3) -Si vous branchez plusieurs enceintes sur l’amplifi
cateur, veillez Ć  ce qu’elles aient toutes la mĆŖme
polaritƩ (p. ex. conducteur noir = pƓle moins) et
Ć  ce que l’amplificateur ne soit pas en surcharge.
La somme des puissances de toutes les enceintes
ne doit pas dĆ©passer la puissance de l’amplifi-
cateur. Toute surcharge peut endommager
l’amplificateur.
4) Pour terminer, orientez la colonne de maniĆØre
optimale vers la zone Ć  sonoriser.
Tout droit de modification réservé.
FranƧaisItaliano
CaractƩristiques techniques
Dati tecnici ETS-210TW/ WS ETS-220TW/ WS ETS-240TW/ WS
Puissance nominale pour 100 V Potenza nominale con 100 V 10 / 5 / 2,5 / 1,25 / 0,63 W 20 / 15 / 10 / 5 / 2,5 W 40 / 30 / 20 / 10 / 5 W
Pression sonore (1 W/1 m) SensibilitĆ  (1 W/1 m) 86 dB 89 dB 90 dB
Bande passante Gamma di frequenze 170 – 20 000 Hz 150 – 20 000 Hz 150 – 20 000 Hz
Nombre HP large bande / tweeter Numero altoparlanti a larga banda / Tweeter
2 + 1 4 + 2 8 + 4
Classe protection Grado di protezione IP 66 IP 66 IP 66
TempĆ©rature fonc. Temperatura d’esercizio –20 °C … +50 °C –20 °C … +50 °C –20 °C … +50 °C
Dimensions (l h p) (l h p) 80 Ɨ 280 Ɨ 70 mm 80 Ɨ 469 Ɨ 70 mm 80 Ɨ 846 Ɨ 70 mmƗ Ɨ Dimensioni Ɨ Ɨ
Poids Peso 1 kg 1,7 kg 2,8 kg
Branchement Collegamento extrĆ©mitĆ©s de cĆ¢ble dĆ©nudĆ©es • Terminali spelati dei cavi


Produktspezifikationen

Marke: Monacor
Kategorie: Lautsprecher
Modell: ETS-210TW/WS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Monacor ETS-210TW/WS benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Monacor

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-