Monacor ELIP-2000BX Bedienungsanleitung

Monacor Bewakingscamera ELIP-2000BX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Monacor ELIP-2000BX (14 Seiten) in der Kategorie Bewakingscamera. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
Quick Start Guide
Note:
This manual may contain some incorrect places, even though it was published with our carefully proofreading.
The news updates will be added to the next release without notice. Your valuable advice is really appreciated.
V 4.0
ELIP-2000BX ELIP-2036BF ELIP-2036DF
ELIP-2037PIR ELIP-2550BVM ELIP-2812BV
ELIP-2812BWDR ELIP-2812DV ELIP-2812DVM
1
Note:
PoE Switch
9 Port Fast Ethern et Swit ch With 8 Po rt PoE
Power Adapter
POE Ethernet Switch
RJ-45
RJ-45
RJ-45
RJ-45
HD IP Camera (PoE)
HD IP Camera (PoE)
To PoE Switch LAN port
DC 12V
DC 12V
HD IP Camera
(without PoE)
HD IP Camera
(without PoE)
To Switch or Router LAN port
To Switch or Router LAN port
To router LAN port
Router
HDMI or VGA output
HDMI or VGA output
RJ-45 To router LAN port
To router LAN port
PoE NVR
To NVR PoE port
1. The camera should be connected to an OPTIONAL 12 volt power supply if you do not use PoE (Power
over Ethernet).
2. A Windows computer is more convenient to setup and troubleshooting.
Figure 1: Working With POE Switch
Figure 2: Working With POE NVR
Modifying the
Connecting the camera to system
2
Modifying the camera’s IP address
Note ou can also find out the LAN configuration via Windows GUIY
Now you can get all the
local network information.
IPv4 Address: 192.168.1.?
Subnet Mask: 255.255.255.0
Default gateway: 192.168.1.1
DNS Servers: 192.168.1.1
Default: IP address: 192.168.0.123 , Username: admin, Password: 123456
( We strongly recommend modifying the default password for your security).
Each IP camera has the same default IP address after leaving the factory. In order to
guarantee network connectivity and access the live video, it is essential to change the
camera’s IP address to unique via computer before using. To quickly configure the IP
camera, download the device search tool from the Internet: www.monacor.com ->
Support -> Downloads.
Before modifying the IP address you’d better confirm the IP network planning and avoid
IP address conflict.
Steps on Local Area Windows 10 PC : Search Windows -> cmd -> ipconfig /all
Modifying the

Produktspezifikationen

Marke: Monacor
Kategorie: Bewakingscamera
Modell: ELIP-2000BX

Brauchst du Hilfe?

Wenn Sie Hilfe mit Monacor ELIP-2000BX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewakingscamera Monacor

Bedienungsanleitung Bewakingscamera

Neueste Bedienungsanleitung für -Kategorien-