Monacor ELAX-2812BV Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Monacor ELAX-2812BV (4 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
21
1080P HD CCTV Camera
AHD CVBS HDCVI HDTVI
Specifications
Connection diagram
1080P DVR
video out
12V DC
mode swich
1 2
on
ON
21
ON
21
ON
21
ON
HD TVI HD CVI Analog AHD
Thank you for purchasing our product. If there are any questions,
please read this user manual at first, and do not hesitate to contact us.
Note:
This manual may contain some incorrect places, even though it was
published with our carefully proofreading. The news updates will be
added to the next release without notice. Your valuable advice is really
appreciated.
Cautions:
Make sure the power supply is matched with the camera power
input to avoid damage. Neither of the power adapter nor video
cable should not be beyond the longest transportation limit.
Model
Image Sensor
Chipset
Effective Pixels
Lowest illumination
Electronic Shutter
Video System
Video Frame Rate
Video Output
Video Switch
Smart IR Control
Day/Night
WDR
OSD Menu
Other Function
Power Supply
Power Consumption
Working Environment
IR LED
IR Distance
Lens
Transmission Distance
1080P 4-in-1 HD Camera
1/2.7" 2.1 Mega pixels CMOS
AR0230+FH8536
1928(H)×1088 (V)
0.02Lux@ F1.2,AGC ON , 0 Lux with IR( )
1/50s~1/60,000s
PAL/NTSC
25/30fps@1920×1080P
1 channel, HDCVI / HDTVI/AHD/CVBS optional
2 bit switch
Support
Auto(ICR) / Color / B/W
D-WDR
Support, coaxial cable control via DVR directly (UTC)
AWB, AGC, BLC
DC12V±10%
< 5W
-30°C~+60°C / Less than 95%RH
24/30/36/48/72 pcs selectable
10/15/20/30/50/80 meters selectable
3.6/6/8/12/16/25 mm selectable
Over 300m via 75-3 coaxial cable
Camera
General
4-in-1
1.Image black/white, roll over
1) check the camera rear mode switch cable, adjust it and
make sure the video output is matched for your DVR.
2) go to the camera menu and change the PAL/NTSC mode.
2.Video signal shows horizontal ribbon disturbed area
1) check the power supply cable , it should not be too long,
or change a high quality power adapter to replace.
2) Make sure the DVR BNC port connected stable and the
DVR housing GND grounded.
3.Camera keep white/black , IR led not working or keep on,
glass cover broken, etc.
1) Call the franchiser to repair. Please do not open or try
repairing it without permission.
power adapter
coaxial cable
OSD Menu Control
Functions brief OSD Menu Control
*
*
*
*
*
*
*
HD CMOS sensor
Within high sensitivity CMOS image sensor, 1080P video
output , very low illumination Prefect image quality emerge
both on day and night environment
4-in-1 Multiply Video modes output
Support 4 HD signals switch output, AHD/HDCVI/HDTVI/
CVBS, easy to use switch cable
OSD menu control up the coaxial cable(UTC)
Camera parameters can be setup via built-in menu. All the
configuration can be changed by back-end DVR directly
up the coax. No need press the cable button
Over 300 meters long distance video signal transportation
Smart IR control, AGC, D-WDR, DNR
Wide range voltage adaptation, Lightning protection
Strong and pretty housing, installations angles can be
adjusted
This series HD camera can support OSD menu coaxial control
by reusing the video cable. It means user can configure,
without menu button, the camera parameters via DVR directly.
( the DVR also should support UTC ) It’s immensely
convenient for site adjustment.
How to enter to the camera menu ?
In general, the DVR must have the coaxial control feature. Go
to the PTZ control window and click the “+ iris -” to call out the
camera menu.
The menu contents is listed as below:
AE: auto image enhancement
WB: white and black balance mode
DAY-NIGHT: day and night switch mode
VIDEO SETTING: video basic parameters, PAL/NTSC, WDR,
DNR adjustment
LANGUAGE: menu language select
RESET: reload factory default
SAVE-EXIT: save all settings and exit menu.
ATW: auto tracking white balance -- default mode
Color: keep color
WB: keep white and black mode
Smart: auto change to color and WB
DNR: digital noise reduce -- reduce the image noise points in
dark environment
WDR: wide dynamic range -- pick up a balance image when
working in back-light environment
Please install this device in appropriate temperature,
-30 - 60 or -22 - 140 , keep away from ℃ ℃
corrosive gas and liquid.
Don’t put the camera direct to the sunlight, it is
recommended installing it under a sun shade.
Caution :


Produktspezifikationen

Marke: Monacor
Kategorie: Überwachungskamera
Modell: ELAX-2812BV

Brauchst du Hilfe?

Wenn Sie Hilfe mit Monacor ELAX-2812BV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Überwachungskamera Monacor

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-