Mitsubishi P91E Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mitsubishi P91E (31 Seiten) in der Kategorie Drucker. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/31
VIDEO COPY PROCESSOR
MODEL
P91W
P91E
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT 
TO YOU.
PLEASE READ IT BEFORE USING YOUR 
VIDEO COPY PROCESSOR.
VIDEO COPY
PROCESSOR
OPEN
BRT CONT GAMMAPRT-SIZE
COPY/FEED
PRINT
This video copy processor complies with the requirements of the EC Directive 89/336/
EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper
operation in residential areas, on business and light industrial premises and on small-
schale enterprises, inside as well as outside of the buildings. All places of operation
are characterised by their connection to the public low voltage power supply system.
WARNING:
Use the AC power cord recommended as below and the included composite video cable so
as not to interfere with radio and television reception.
If you use other cables, it causes interference with radio and television reception.
FOR THE MODEL P91W ONLY
WARNING:
Use the AC power cord according to the recommendations as below,
Case 1, 2, 3 and 4; in order to comply with UL2601 and CAN/CSA C22.2 No. 601.1.
Case 5; in order to comply with EN60601-1 and EN60950.
Case 1. Connect to the 120V receptacle of the room or the host equipment.
The AC power cord should be UL and CSA approved and consist of type SJT, size
16AWG, length 2.2m or shorter cord with IEC320/C13 type, 125V 10A or higher rating
connector and NEMA 5-15 type, 125V 10A or higher rating, Hospital Grade plug.
Case 2. Connect to the 230V receptacle of the room or the host equipment.
The AC power cord should be UL and CSA approved and consist of type SJT, size
16AWG, length 2.2m or shorter cord with IEC320/C13 type, 250V 10A or higher rating
connector and NEMA 6-15 type, 250V 10A or higher rating, Hospital Grade plug.
Case 3. Connect to the 120V receptacle of the host equipment.
The AC power cord should be UL and CSA approved and consist of type SJT, size
16AWG, length 2.2m or shorter cord with IEC320/C13 type, 125V 10A or higher rating
connector and IEC320-2.2/E type, 125V 10A or higher rating plug.
Case 4. Connect to the 230V receptacle of the host equipment.
The AC power cord should be UL and CSA approved and consist of type SJT, size
16AWG, length 2.2m or shorter cord with IEC320/C13 type, 250V 10A or higher rating
connector and IEC320-2.2/E type, 250V 10A or higher rating plug.
Case 5. Connect to the 230V receptacle of the room or the host equipment.
The AC power cord should be VDE approved and consist of core size 1mm
2 or bigger,
length 2.2m or shorter cord with IEC320/C13 type, 250V 10A or higher rating connec-
tor and CEE(7)VII type or IEC 320-2.2/E type, 250V 10A or higher rating plug.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his or her own expense.
Information:
This class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
"CLASSIFIED BY UNDERWRITERS LABORATORIES INC.®
WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 AND CAN/CSA C22.2 No. 601.1"
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient mag-
nitude to constitute a risk of electric shock.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
This product is to be employed with medical equipment, just for
reference purpose, not for medical diagnostic purpose.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.


Produktspezifikationen

Marke: Mitsubishi
Kategorie: Drucker
Modell: P91E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mitsubishi P91E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Drucker Mitsubishi

Bedienungsanleitung Drucker

Neueste Bedienungsanleitung für -Kategorien-