MIOPS RemotePlus Bedienungsanleitung

MIOPS Afstandsbediening RemotePlus

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MIOPS RemotePlus (24 Seiten) in der Kategorie Afstandsbediening. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
RemotePlus User Manual
Content:
1.
Content of the Package
2. Charging and Operation
3. First Use
4. Camera and Flash Connection
5. Mobile Application
6. Connecting to MIOPS RemotePlus
7. Firmware Upgrade
8. Using the Mobile Application
9.
FEATURES
9.1. CABLE RELEASE MODES
9.1.a. Cable Release
9.1.b.
Press & Hold
9.1.c. Press & Lock
9.1.d. Timed Release
9.1.e.
Self Timer
9.1.f. Timed Release & Self Timer
9.2. TIMELAPSE MODES
9.2.a. Basic Timelapse
9.2.b. Long Exposure Timelapse
9.2.c. Bulb Ramping Timelapse
9.2.d. Road Lapse
9.2.e. HDR Timelapse
9.2.f. HDR
9.3.
SMARTPHONE SENSOR MODES
9.3.a. Sound
9.3.b. Vibration
9.3.c. Motion
9.4.
DEVICE SENSOR MODES
9.4.a. Lightning
9.4.b. Sound
9.4.c. Laser
10. SETTINGS
1. Content of the Package
When you purchase a MIOPS RemotePlus, it will be delivered with the following
items.
1 x MIOPS RemotePlus
1 x USB Charge Cable
2. Charging and Operation
MIOPS RemotePlus comes with a rechargeable battery which lasts up to 24 hours
with a single charge. The battery will be charged when you
connect MIOPS RemotePlus to a USB power source. You can use your computer USB
port for this purpose.
You can power MIOPS RemotePlus directly from the USB port.
3. First Use
Your MIOPS RemotePlus may not be delivered with the latest firmware. If a new
firmware has been released, before you have used it for the first time, you should
update the firmware first. To get detailed information about the firmware
upgrade, see the Firmware Upgrade Section.
The rechargeable battery comes partially charged. You can use it right out of the
box but you may need to charge to get it fully loaded. You can charge the battery
using any USB charger (500 mA min.) or the USB port of your computer. MIOPS
RemotePlus will be delivered with a Mini-USB cable. You can use this cable to
charge it. The mini end of the USB cable will be plugged into the USB port. It is
located on the left side of the device under the protective cover.
When you short press the button on the back side of the device, the lights on the
top side will flash for a short time and the device will start to work.
4. Camera and Flash Connection
The MIOPS RemotePlus uses connection cables to trigger your camera or flash unit.
Your unit will be shipped with the proper camera connection cables. The MIOPS
RemotePlus is a versatile device, which is compatible with many brand and models.
You can use the same device with many different cameras by just changing the
connection cable.
The MIOPS RemotePlus has a single output for both the camera and the flash
connection. The port is a 2.5 mm stereo female jack. The camera cable already has
the male 2.5 mm stereo jack on one end. The other end changes depending on the
camera. For flash connection, you should have a cable with 2.5mm stereo jack on
one end and your flash compatible plug on the other end. You may consider
purchasing a MIOPS Flash Adapter if you don't have a compatible flash cable.
The camera and flash cables are designed to trigger the cameras and flash units
only. Do not use them for any other purpose. Doing so may damage the cable or the
device.
5. Mobile Application
MIOPS RemotePlus requires a mobile app which has been designed as an interface
to configure and control your device easily. The communication between the
smartphone and MIOPS RemotePlus is done over Bluetooth connection. So, your
smartphone has to be compatible with Bluetooth 4.0.
MIOPS MOBILE app is available on iOS and Android platforms. Search for MIOPS
MOBILE in your app store, or use the following buttons to download the app.
6. Connecting to MIOPS RemotePlus
Warning: Please make sure that your Bluetooth is turned ON in the connection
preferences of your smartphone or tablet.
After opening the mobile app, you will be asked for selecting your MIOPS product.
After selecting MIOPS RemotePlus from the list, you will be listed all available
RemotePlus devices around. In case your device is not shown in the list, make sure
that your RemotePlus is turned ON and click the Scan button again.
7. Firmware Upgrade

Produktspezifikationen

Marke: MIOPS
Kategorie: Afstandsbediening
Modell: RemotePlus

Brauchst du Hilfe?

Wenn Sie Hilfe mit MIOPS RemotePlus benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Afstandsbediening MIOPS

MIOPS

MIOPS Splash Bedienungsanleitung

3 September 2024
MIOPS

MIOPS RemotePlus Bedienungsanleitung

2 September 2024

Bedienungsanleitung Afstandsbediening

Neueste Bedienungsanleitung für -Kategorien-

Thomson

Thomson ROC4309 Bedienungsanleitung

19 September 2024
One For All

One For All Smart Control PS3 URC 7965 Bedienungsanleitung

19 September 2024
KPN

KPN Afstandsbediening Interactieve TV Bedienungsanleitung

18 September 2024
Meliconi

Meliconi Pratico 2 Bedienungsanleitung

18 September 2024
Nanlite

Nanlite WC-USBC-C1 Bedienungsanleitung

18 September 2024
Tascam

Tascam RC-10 Bedienungsanleitung

17 September 2024
Philips

Philips SRP6011 Bedienungsanleitung

17 September 2024
Bigben Interactive

Bigben Interactive Blu-Ray Remote Bedienungsanleitung

17 September 2024
Fortin

Fortin EVO-ALL Bedienungsanleitung

17 September 2024
Sony

Sony RM-V301 Bedienungsanleitung

16 September 2024