Mio Moov M410 Bedienungsanleitung

Mio Navigator Moov M410

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mio Moov M410 (67 Seiten) in der Kategorie Navigator. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/67

Moov M410/M610 Series

Hardware User Manual

Important safety information

PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all

safety messages that follow this symbol to avoid possible injury or death.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make it illegal to

operate in some jurisdictions.

Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications.

Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.

It is your sole responsibility to place, secure and use your Mio in a manner that will not cause accidents, personal injury or

property damage. Always observe safe driving practices.

Do not mount your Mio in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other

safety equipment.

Do not operate your Mio while driving.

Before you use your Mio for the first time, familiarize yourself with your device and its operation.

On main roads, the distance to an exit calculated by your Mio may be further than the distance shown on road signs. Road signs

show the distance to the start of an exit while your Mio shows the distance to the next intersection, i.e., the end of the exit

ramp or road. To prepare to exit a road, always follow distance information on road signs.

The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are

responsible for checking that you can legally use the information in your country or in the country where the information will

be used.

Do not handle your Mio while it is hot. Let the product cool, out of direct sunlight.

At full power, prolonged listening to your Mio via headphones or earphones can damage the ear of the user.

Do not expose your Mio to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit.

To discourage theft, do not leave your Mio, mounting

To discourage theft, do not leave your Mio, mountingTo discourage theft, do not leave your Mio, mounting bracket or any cables in plain view in an unattended vehicle.

bracket or any cables in plain view in an unattended vehicle.

bracket or any cables in plain view in an unattended vehicle. bracket or any cables in plain view in an unattended vehicle.

Warning Notice to Drivers in the United States

State law may prohibit drivers in states such as Arizona, California and Minnesota from mounting objects on their windshields

while driving. Please make sure you research and follow your most current State laws. An alternative mounting option may be

provided in the box with your product; or see our website for additional mounting alternatives. Mio does not take any

responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.

Home charger-specific safety information

To charge your Mio from the mains power, use the home charger (Model: MII050100; Input: 100-240V AC 50-60Hz; Output: 5V

DC 1A Max) supplied by Mio as an accessory (may be sold separately). Using other home chargers with your Mio could result in

serious injury or property damage.

Never use the charger if the plug or cord is damaged.

Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may

cause electrical sparks or fires.

Never touch the charger when your hands or feet are wet.

Allow adequate ventilation around the charger when using it to operate your Mio or charge the internal battery. Do not cover

the charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carrying case or

other container.

Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltage

requirements can be found on the home charger casing and/or packaging.

Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed to

excess moisture.

Internal battery-specific safety information

Your Mio contains a non-replaceable internal lithium-ion battery. The battery may burst or explode if mishandled, releasing

hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery.

Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in

fire or water.

About the battery

 Use a specified battery in the equipment.

 CAUTION:

CAUTION:

CAUTION:CAUTION: The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not

disassemble, crush, puncture, or dispose of in fire or water.

 Important instructions (for service personnel only)

 Caution:

Caution:

Caution:Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the

instructions.

 Replace only with the same or equivalent type recommended by the manufacturer.

 The battery must be recycled or disposed of properly.

 Use the battery only in the specified equipment.

Only use the correct home charger (may be sold separately) or in-car charger supplied by Mio to charge your Mio internal

battery.

Only use your Mio internal battery with your Mio unit.

The Mio battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 40ºC (104ºF).

Failure to adhere to these warnings and cautions may lead to de

Failure to adhere to these warnings and cautions may lead to deFailure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Mio disclaims all

ath, serious injury or property damage. Mio disclaims all

ath, serious injury or property damage. Mio disclaims all ath, serious injury or property damage. Mio disclaims all

liability

liabilityliability for installation or use of your Mio that causes or contributes to death, injury or property damage or that

for installation or use of your Mio that causes or contributes to death, injury or property damage or that

for installation or use of your Mio that causes or contributes to death, injury or property damage or that for installation or use of your Mio that causes or contributes to death, injury or property damage or that

violates any law.

violates any law. violates any law.

Compliance

WARNING

WARNINGWARNING This product, its packaging and its components contain chemicals known to the State of California to cause

cancer, birth defects or reproductive harm. This Notice is being provided in accordance with California’s Proposition 65.

For regulatory identification purposes: Mio Moov M410 Series is assigned a model number of N393-4300.

For regulatory identification purposes: Mio Moov M610 Series is assigned a model number of N393-5000.

Marking labels located on the exterior of your Mio indicate the regulations that your model complies with. Please check

Marking labels located on the exterior of your Mio indicate the regulations that your model complies with. Please check Marking labels located on the exterior of your Mio indicate the regulations that your model complies with. Please check

the

thethe marking labels on your Mio and refer to the corresponding statements in this chapter. Some notices apply to

marking labels on your Mio and refer to the corresponding statements in this chapter. Some notices apply to

marking labels on your Mio and refer to the corresponding statements in this chapter. Some notices apply to marking labels on your Mio and refer to the corresponding statements in this chapter. Some notices apply to

specific models only.

specific models only. specific models only.

Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EC),

the Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) - issued by the

Commission of the European Community. Compliance with these directives implies conformity to the following European

Standards:

EN 301 489-1

EN 301 489-1EN 301 489-1: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic Compatibility (EMC) standard for

radio equipment and services; Part 1: Common technical requirements.

EN 55022

EN 55022EN 55022: Radio disturbance characteristics

EN 55024

EN 55024EN 55024: Immunity characteristics

EN 61000-3-2

EN 61000-3-2EN 61000-3-2: Limits for harmonic current emissions

EN 61000-3-3

EN 61000-3-3EN 61000-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system

IEC 60950-1:2005

IEC 60950-1:2005IEC 60950-1:2005: Product Safety

The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may

alter the conformity of the product with the CE Marking.

Declaration of conformity

Hereby, Mio Technology declares that this N393-4300/N393-5000 is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

WEEE

This product must not be disposed of as normal household waste, in accordance with the EU directive for waste

electrical and electronic equipment (WEEE - 2002/96/EC). Instead, it should be disposed of by returning it to the

point of sale, or to a municipal recycling collection point.

Welcome

Thank you for purchasing this Mio. Please read this manual carefully before using your Mio for the first time.

Keep this manual in a safe place and use as your first point of reference.

Important information for using the manual

It is important to understand the terms and typographical conventions used in this manual.

Formatting

The following formatting in the text identifies special information:

Convention

Convention Convention Type of Information

Type of Information

Type of Information Type of Information

Bold

BoldBold Components or items displayed on screen, including buttons, headings, field names and

options.

Italics Indicates the name of a screen.

Icons

The following icons are used throughout this manual:

Icon

Icon Icon Description

Description

Description Description

Note

Tip

Warning

Terms

The following terms are used throughout this manual to describe user actions.

Term

Term Term Description

Description

Description Description

Press Press and release a button quickly.

Tap Press and release an item displayed on the touch screen.

Select Tap an item in a list or tap a command from a menu.

Disclaimer

Not all models are available in all regions.

Depending on the specific model purchased, the colour and look of your device and accessories may not exactly

match the graphics shown in this document.

Mio operates a policy of ongoing development. Mio reserves the right to make changes and improvements to

any of the products described in this document without prior notice. Mio does not warrant that this document

is error-free. The screenshots and other presentations shown in this manual may differ from the actual screens

and presentations generated by the actual product. All such differences are minor and the actual product will

deliver the described functionality as presented in this User Manual in all material respects.

Revision: R00

(3/2012)

Mounting your Mio in a vehicle

CAUTION:

CAUTION: CAUTION:

 Never mount your Mio where the driver’s field of vision is blocked.

 If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In

this instance, please mount your Mio where there is a “clear area” - usually just beneath the rear-view

mirror.

 To protect your Mio against sudden surges in current, connect the in-car charger only after the car engine

has been started.

Getting to know your Mio

 Power button Battery indicator

 Reset button Touch screen

 Speaker Connector for in-car charger, USB

cable*, home charger* and TMC

accessory kit*

*may be sold separately

How do I turn on my Mio?

Using the power button

For the initial start-up, press and hold the power button for 2 seconds to turn on your device.

For normal operation, turn off the device by briefly pressing the power button. Your Mio will enter a suspended

state. When you next briefly press the power button, your Mio will return to the Main Menu.

To turn off your Mio, press and hold the power button for 5 seconds.

Resetting the device

Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be

“frozen” or “locked-up.” Insert a small rod, such as a straightened paperclip, into the reset button of your

device.

How do I charge the battery at home or work?

You can use an optional home charger to charge the battery.

To charge your Mio using a mains power socket, plug the home charger cable into on the left side of your

Mio and the mains power charger into the power socket.

The home charger is not included with all models and may be purchased separately (see www.mio.com for

details).

Reference

What is GPS?

The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft).

GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi).

Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Mio, to determine an

exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals

are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems.

How does my Mio receive GPS signals?

Your Mio receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength,

ensure your Mio is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is

not usually affected by weather, however, very heavy rain or snow may have a negative effect on your

reception.

Caring for your Mio

Taking good care of your Mio will ensure trouble-free operation and reduce the risk of damage to your Mio:

 Keep your Mio away from excessive moisture and extreme temperatures.

 Avoid exposing your Mio to direct sunlight or strong ultraviolet light for extended periods of time.

 Do not place anything on top of your Mio or drop objects on your Mio.

 Do not drop your Mio or subject it to severe shock.

 Do not subject your Mio to sudden and severe temperature changes. This could cause moisture

condensation inside the unit, which could damage your Mio. In the event of moisture condensation, allow

your Mio to dry out completely before use.

 The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic

screen protectors designed specifically for use on portable devices with LCD panels may be used to help

protect the screen from minor scratches.

 Never clean your Mio when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of

your Mio.

 Do not use paper towels to clean the screen.

 Never attempt to disassemble, repair or make any modifications to your Mio. Disassembly, modification

or any attempt at repair could cause damage to your Mio and even bodily injury or property damage and

will void any warranty.

 Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your

Mio, its parts or accessories.

Troubleshooting

If you encounter a problem you cannot solve, contact an authorized service centre for assistance.

Problems

Problems Problems Solutions

Solutions

Solutions Solutions

Your Mio does not turn on when using

battery power.

The remaining battery power may be too low to operate your Mio.

Charge the battery using the in-car charger, home charger (may be

sold separately) or USB cable (may be sold separately), then try again.

Screen responds slowly. The rema low to operate your Mio. If ining battery power may be too

the problem still persists, reset your Mio.

Screen freezes. Reset your Mio.

Screen is hard to read. Increase the screen brightness.

Cannot establish a connection with a

computer.

Ensure that your Mio and your computer are both turned on before

trying to establish a connection.

Make sure that the cable is securely plugged into the USB port on your

computer and on your Mio. Connect the USB cable (may be sold

separately) directly to your computer, not a USB hub.

Reset your Mio before connecting the USB cable (may be sold

separately). Always disconnect your Mio before you restart your

computer.

Moov M410 / M610 Series

Software User Manual

Contents

Welcome............................................................................................................................................ 4

How do I use the touch screen?.................................................................................................... 5

Navigating on the screen .......................................................................................................... 5

How do I get started? ..................................................................................................................... 6

Main Menu......................................................................................................................................... 7

How do I navigate through the menu screens?.................................................................... 7

How do I go from A-B? ................................................................................................................... 9

How do I plan my first trip?...................................................................................................... 9

How do I preview the destination on map? ........................................................................ 10

How do I view my route? ..............................................................................................................11

The driving map..........................................................................................................................11

How do I view my route statistics?....................................................................................... 12

How do I adjust the volume? ................................................................................................. 12

How do I zoom in/out the map?............................................................................................ 13

What if I miss a turn?............................................................................................................... 13

IQ Routes™ and LearnMe™.................................................................................................... 14

How do I search for a POI by type? ........................................................................................... 15

How do I search for a POI by keyword?..................................................................................................17

How do I receive current traffic information via TMC?......................................................... 18

How will I know when a Traffic Event occurs? ................................................................... 18

Traffic Overview screen........................................................................................................... 18

Traffic messages........................................................................................................................ 21

My Places .........................................................................................................................................22

How do I save a location as My Place or Home? ...............................................................22

How do I navigate to a location I have saved?...................................................................22

How do I navigate to Home? .................................................................................................23

How do I navigate to a recent place? ...................................................................................23

How do I edit the name of a location in My Places?.........................................................24

How do I delete a saved location? ........................................................................................24

How do I import a location to My Places from Google Maps?....................................... 25

What is NEAR ME?.........................................................................................................................26

How do I search for a POI using NEAR ME?........................................................................26

What can I customise?..................................................................................................................28

Audio............................................................................................................................................28

Screen..........................................................................................................................................29

Safety........................................................................................................................................... 29

Maps.............................................................................................................................................30

Route options ............................................................................................................................ 31

Language..................................................................................................................................... 31

Units............................................................................................................................................. 32

Device.......................................................................................................................................... 32

Demo ...........................................................................................................................................33

Help..............................................................................................................................................34

What is MioMore Desktop? .........................................................................................................35

How do I install MioMore Desktop onto my computer?.................................................. 35

MioMore Desktop Menu.......................................................................................................... 37

My Subscriptions.......................................................................................................................38

My Maps......................................................................................................................................40

Custom POIs ..............................................................................................................................43

Unlock Features.........................................................................................................................45

Redeem .......................................................................................................................................46

MY MIO....................................................................................................................................... 47

For more information....................................................................................................................50

Point of Interest categories ....................................................................................................50

Traffic and other TMC Events................................................................................................. 52

Online support........................................................................................................................... 53

Mio Advantage...........................................................................................................................53

Speed Limit.................................................................................................................................53

Safety Camera POIs .................................................................................................................53

Disclaimer ...................................................................................................................................54

Copyright....................................................................................................................................54

Welcome

Thank you for purchasing this Mio. This manual has been prepared to guide you through the operation of your

Mio from first set-up through to continuous use. Please read this manual carefully before using your Mio for the

first time. Keep this manual in a safe place and use as your first point of reference.

Important information for using the manual

It is important to understand the terms and typographical conventions used in this manual.

Formatting

The following kinds of formatting in the text identify special information:

Convention

Convention Convention Type of Information

Type of Information

Type of Information Type of Information

Bold

Bold Bold Mio components or items displayed on screen, including buttons, headings, field names

and options.

Italics Indicates the name of a screen.

Icons

The following icons are used throughout this manual:

Icon

Icon Icon Description

Description

Description Description

Note

Tip

Warning

How do I use the touch screen?

Navigating on the screen

To operate your Mio, touch the screen with your fingertip. You can perform the following actions:

 Tap

Tap

Tap Tap

Press and release an item displayed on the touch screen.

 Select

Select

Select Select

Tap an item in a list or tap a command from a menu.

How do I get started?

The first time you use your Mio it may take several minutes to establish a GPS connection.

How do I turn my Mio on for the first time?

To get started for the first time, complete the following steps:

1. Read the Imp

Read the Imp

Read the ImpRead the Important Safe

ortant Safe

ortant Safeortant Safety Informatio

ty Informatio

ty Informatioty Information

2. Position your Mio in your

Position your Mio in your

Position your Mio in yourPosition your Mio in your vehicle

vehicle

vehicle vehicle

Follow the instructions in the Quick Start Guide.

CAUTION

CAUTIONCAUTION Ensure that your Mio does not obstruct the driver's view, or interfere with the operation of

the vehicle airbags and safety devices.

3. Turn your Mio on

Turn your Mio on

Turn your Mio onTurn your Mio on

Your Mio will turn on and display the Language screen.

4. Select your preferred la

Select your preferred la

Select your preferred laSelect your preferred language

nguage

nguagenguage

From the Select Language screen, tap your preferred language.

 You can change your preferred language while using your Mio.

5. Read the

Read the

Read theRead the warnin

warnin

warnin warning message

g message

g messageg message

The Safety Agreement screen will display after you have selected your preferred language. Read the Safety

Agreement message. To confirm that you have read and understood the message, tap Accept

AcceptAccept.

6. View the Tut

View the Tut

View the TutView the Tutorial

orial

orialorial

 To move forward through the Tutorial screen, tap Next

NextNext. To view the previous screen, tap .

 To skip the Tutorial screen, tap Skip

Skip

SkipSkip.

To prevent the Tutorial from displaying on each start-up, tap the option to

Show tutorial on start-u

Show tutorial on start-uShow tutorial on start-up

deselect it. To enable the tutorial again, select the option from Main Menu

Main Menu

Main Menu Main Menu 

 Help

Help

Help Help

 View

View

View View

Tutorial

TutorialTutorial.

7. Customis

Customis

CustomisCustomise the device

e the device

e the devicee the device

Follow the onscreen instructions to select your preferred distance unit, date format, and time format.

8. Unlock your Mio

Unlock your Mio

Unlock your MioUnlock your Mio

Depending on your model, you may need to enter a Startup Key (which is printed on the side of the box)

and then tap OK

OKOK to unlock the device. You will only have to do this the first time you use your Mio.

It is recommended that you keep a copy of the Startup Key in a safe place.

9. Set up Home

Set up Home

Set up HomeSet up Home

The Home setup wizard only appears on the first time you start your Mio.

 Tap OK

OKOK to set up your home immediately using the address-entry wizard.

 You can tap Cancel

Cancel

CancelCancel to skip the wizard, and then select you home later in MY PLACES.

When you have finished the steps above, the Main Menu screen will display. If you have a GPS fix, you can start

to use Mio to plan your trip.

Main Menu

The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to

customise your Mio, view saved locations as My Place/Home, and search for POIs nearby.

Search for places, areas and streets to help plan your route.

Display the Map screen.

Access your saved locations.

Configure your Mio to enhance your navigation experience.

Search for Points of Interest nearby.

How do I navigate through the menu screens?

How do I use the BACK button and MAIN MENU button in the title bar?

1. On the Main Menu screen, tap the desired menu button to enter the menu screen.

For example, tapping will lead you to the FIND main screen.

2. The system provides the BACK button ( ) and MAIN MENU button ( ) in the title bar of the

menu screen, which allow you to navigate through the menu screens easily. You can:

 Return to the previous screen by tapping the BACK button.

 Return to the Main Menu by tapping the MAIN MENU button.

In some menu screens, such as the Keyboard screen, the MAIN MENU button will not appear in the title

bar. In this instance, you may have to tap the BACK button twice.

How do I use the tabs in the title bar?

In some menu screens, such as the map Overview screen, the system provides the tab buttons that allow you to

enter the additional page in the menu screen. Simply tap the desired tab to change the view.

The selected tab will be highlighted as a darker-colour tab.

How do I go from A-B?

Your Mio is equipped with maps that provide street-level detail for door-to-door navigation, including Points of

Interest such as accommodation, parking areas, petrol stations, railway stations and airports.

When you ...

When you ... When you ... Then ...

Then ...

Then ... Then ...

need to search for an address tap then select Address

Address

AddressAddress to search for the address.

want to search all information on the

device - city, streets, named sites,

features, landmarks or venues

tap then select By Keyword

By Keyword

By KeywordBy Keyword.

search for a Point of Interest tap then select Points of

Points of

Points ofPoints of Interest

Interest

Interest Interest to search for a POI.

want to navigate to a recently visited

location tap then select the Re

ReRecent Loca

cent Loca

cent Locacent Locations

tions

tionstions tab ( ).

WARNING

WARNINGWARNING For your safety, enter destination information before you start a journey. Do not enter a

destination while driving.

How do I plan my first trip?

Using your Mio to plan your first trip is easy. There are several ways to select your destination. Complete the

following to navigate to a street address that you know using the FIND address wizard.

 



When it is the first time you use FIND wizard, the Select Country screen will appear before the FIND main

screen. Select your country and then you can start searching location.

If needed, you can change the country to search location. To select the other country, tap the National

Flag button (e.g. ) in the title bar of the Keyboard screen before you search the city.

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

calculate the route and start

navigating

 tap

The Map screen will display.

save the location as a favourite  tap

The location will be saved in My Places immediately.

save the location as Home  tap 

The Edit screen will display.

 tap Save as Home

Save as Home

Save as HomeSave as Home.

explore the map  tap Show on map

Show on map

Show on mapShow on map.

How do I preview the destination on map?

After searching an address (or a POI), you can preview the destination on map to explore the area near the

location. On the Destination screen, tap the Show on map

Show on map

Show on mapShow on map button to display the destination preview map as

below.



How do I explore the map?

On the destination preview map, you can:

 Tap the / button to zoom in/out the map.

 View the information of your destination that is shown at the top of the map screen.

 Tap on a street/area/POI to display the related information of the location near your destination.

 The information of the selected street/area/POI near your destination will be displayed with a check mark.

Tapping the check mark will bring up the Destination screen of the selected location.



How do I view my route statistics?

Tap anywhere on the Map screen to bring up the Map options screen. Tap the Route button to view the route

statistics.

 



Your Mio provides information on your:

 time to destination

 distance to go

 estimated time of arrival

 distance travelled

 time taken for trip

 stationary time

Tap the tabs in the title bar to view the additional information in the different screens.

How do I adjust the volume?

From the Map options screen, tap . The volume buttons will be displayed on the map screen in

translucent mode.

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

increase the volume tap

 The volume bar indicates the current volume level.

decrease the volume tap

 The volume bar indicates the current volume level.

mute or unmute tap

 The speaker icon indicates the status:

: muted : unmuted

The volume buttons will automatically disappear after the map is idle for 5 seconds.

How do I zoom in/out the map?

From the Map options screen, tap . The zoom buttons will be displayed on the map screen in translucent

mode.

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

zoom in the map tap and hold .

zoom out the map tap and hold .

The zoom buttons will automatically disappear after the map is idle for 5 seconds.

What if I miss a turn?

Back-On-Track™ Automatic Rerouting

You will be redirected if you make a wrong turn. A message informing you that your route is being re-calculated

will display at the top of the screen.

To cancel a route re-calculation, tap on the Map options screen. A warning will display asking you to

confirm the cancellation. If confirmed, both the re-calculation and your current route will be cancelled.

How do I search for a POI by type?

A POI (Point of Interest) is a named site, feature, landmark or public venue which can be displayed as an icon on

the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums.

1. Tap .

2. Tap .

The POI Menu screen will display.

3. Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

search for the POIs near your

current location

tap Nearby

Nearby

NearbyNearby.

The POI Type Selection screen will display.

search for the POIs in a specified

city or area

 tap In City/Area

In City/Area

In City/AreaIn City/Area.

The Keyboard screen will display.

 after you have entered a name of a city/area, tap OK

OKOK.

The POI Type Selection screen will display.

search for the POIs on your route tap Along Route

Along Route

Along RouteAlong Route.

The POI Type Selection screen will display.

search for the POIs near your

destination

tap Near Destination

Near Destination

Near DestinationNear Destination.

The POI Type Selection screen will display.

4. Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

search for POIs by keyword  tap By Name

By Name

By NameBy Name.

The Keyboard screen will display.

 after you have entered a keyword, tap OK

OKOK.

The POI List screen will display.

search for petrol stations tap .

The POI List screen will display.

search for parking places tap .

The POI List screen will display.

search for banks and ATMs tap .

The POI List screen will display.

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

search for emergency services tap .

The POI List screen will display.

view more POI types  tap By Type

By Type

By TypeBy Type.

The POI Type List screen will display.

 select a POI type.

The POI List screen will display.

5. Tap the desired item from the list.



6. Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

calculate the route and start navigating tap .

The Map screen will display.

save the location as a favourite tap .

The location will be saved in My Places immediately.

view the POI location on the map tap Show on map

Show on map

Show on mapShow on map.

The Preview screen will display.

How do I search for a POI by keyword?

Complete the following to navigate to a POI that you find by keyword.

Tap .

 

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

calculate the route and start

navigating

tap .

The Map screen will display.

save the location as a favourite tap .

The location will be saved in My Places immediately.

view the location on the map tap Show on map

Show on map

Show on mapShow on map.

The Preview screen will display.

How do I receive current traffic

information via TMC?

Traffic

TrafficTraffic informat

informat

informat information is avai

ion is avai

ion is avaiion is available in se

lable in se

lable in selable in selected mo

lected mo

lected molected models and

dels and

dels anddels and countrie

countrie

countrie countries only.

s only.

s only. s only.

Your Mio can receive current traffic information for all main roads and motorways, enabling you to avoid

potential delays on your route. Event messages and traffic icons will display as they occur. If an event message

obscures your current location, the map will adjust to display both the message and your location.

How does my Mio receive traffic information?

Depending on your model, you may receive current traffic information on your Mio using the built-in TMC

receiver or via the Mio traffic accessory kit. The traffic accessory kit may be sold separately.

The Traffic Message Channel (TMC) broadcasts real-time traffic information via the FM Radio Data System

(RDS). FM radio stations transmit TMC data on a cycle of several minutes, with hundreds of events able to be

broadcast to TMC receivers.

You have to pay for TMC service in some models and in some countries.

How will I know when a Traffic Event occurs?

When travelling through an area in which you can receive traffic updates, your Mio will decode these events and

display them on-screen. An icon will display at the event location on the map screens, and an audible warning is

given if an event is on your route. Where an event spans a specific distance, the road will be highlighted and

arrows will indicate the direction affected.

A message will display at the bottom of the screen with the road name, the section of road affected and the

type of event that has occurred. The message remains on screen for 8 seconds and is added to the Event list.

Traffic Overview screen

Depending on your Mio model, traffic information may not be available, may require a subscription, or

may require the Traffic Accessory Kit (may be sold separately).

When you see the traffic event message on your driving map screen, you can open the Traffic Overview screen

to display a general overview of the traffic situation on your route, including all events in the immediate

vicinity.

How do I view traffic details?

From the Event list screen, tap the event you want to view. The Event details screen will display.







Item

Item Item Description

Description

Description Description

 Tap to return to the previous screen.

 Event icon a

Event icon a

Event icon aEvent icon and

nd nd

description

descriptiondescription

Displays details of the Event, including:

 Name of road and direction in which Event is taking place.

 Location of where Event begins and ends.

o >

>> indicates an Event from a location, to a location.

o < >

< >

< >< > indicates an Event between locations.

 Type of Event.

 Avoid

Avoid

AvoidAvoid Tap to initiate a new route to avoid the event.

Only available if a detour or re-route is available.

The Unavoid Area button is displayed when a re-route has been

calculated.



Detour information

Detour information Detour information Displays details of detour recommendation, if any.

How do I know if a detour is recommended?

When a Traffic or Clearance event occurs on your route, a detour will often be recommended. The detour event

message will display in the status bar on map screens.

Detours are only recommended for Traffic or Clearance Events on a calculated route.

How do I avoid an event on my route?

1. From the Event list screen, tap the event.

The Event details screen will display.

2. If a detour has been calculated to avoid an event on your route, Avoid

Avoid

AvoidAvoid is available; tap to accept the new

route and avoid the event.

The Map screen will display.

My Places

My Places has all your saved locations.

How do I save a location as My Place or Home?

1. Search for an address until the Preview screen is displayed.

2. Tap .

The Save screen will display. The location has been added to My Places.

3. To save the location as Home, tap .

The Edit screen will display.

Tap . The location has been set as Home.

How do I navigate to a location I have saved?

1. Tap .

The My Places screen will display.

2. Tap the favourite destination you want to travel to.

The Preview screen will display.

3. Tap .

Your Mio will calculate the route from your current location. The Map screen will display.

How do I navigate to Home?

If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to

search for an address using the address-entry wizard.

1. Tap .

The My Places screen will display.

2. Tap Home

Home

HomeHome ( ).

The Preview screen will display.

3. Tap .

Your Mio will calculate the route from your current location. The Map screen will display.

How do I navigate to a recent place?

To make navigating to an address easier, your Mio will automatically save all your start locations and

destinations in a list of recent places.

1. Tap .

The My Places screen will display.

2. Tap .

The Recent Locations screen will display.

3. Tap a recent place.

The Preview screen will display.



4. Tap .

Your Mio will calculate the route from your current location. The Map screen will display.

How do I edit the name of a location in My Places?

1. Tap .

The My Places screen will display.

2. Select a location to edit.

The Preview screen will display.

3. Tap .

The Edit screen will display.

4. Tap .

The Keyboard screen will display.

5. After you have edited the name, tap OK

OKOK.

How do I delete a saved location?

1. Tap .

The My Places screen will display.

2. Select the location you would like to delete.

The Preview screen will display.

3. Tap .

The Edit screen will display.

4. Tap .

The location is deleted.

How do I import a location to My Places from Google

Maps?

1. Make sure that MioMore Desktop is installed on your computer, and your computer is connected to the

Internet.

2. Connect your Mio to your computer via the USB cable (may be sold separately).

3. On your computer, go to the Google Maps website (maps.google.com).

4. Search for a place located within your map set.

5. Click on the top-right corner of the screen.

6. On the pop-up screen, select GPS

GPS

GPSGPS, confirm the place’s name, select the proper brand name, and then click

Send

SendSend.

7. Confirm the brand name and your model number.

8. Follow the prompts to complete the process.

3. Tap or to scroll up or down the list. Select the desired item to display the destination screen.



4. Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

calculate the route, open the Map

screen and start navigating

 tap

The Map screen will display.

save the location as a favourite  tap

The location will be saved in My Places immediately.

save the location as Home  tap 

The Edit screen will display.

 tap Save as Home

Save as Home

Save as HomeSave as Home.

explore the map  tap Show on map

Show on map

Show on mapShow on map.

What can I customise?

There are various customisation options available to enhance your navigation experience.



Audio

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

increase/decrease the volume tap / .

The volume bar indicates the current volume level.

You can simply tap on the Volume

Volume

VolumeVolume bar so that the volume will

be set immediately at the position you tapped.

mute or unmute tap .

The speaker icon indicates the status:

: muted : unmuted

hear which letter you have tapped

when you tap the touch screen

tap the Touch audio

Touch audio

Touch audioTouch audio option to turn it On

OnOn or Off

Off

OffOff.

 Your preferences are automatically saved.

Screen

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

change the displayed screen mode tap Screen mode and select:

 Auto:

Auto:

Auto: Auto: set to automatically change between Day and Night

modes.

 Day:

Day:

Day: Day: set the screen to be displayed in Day mode.

 Night:

Night:

Night: Night: set the screen to be displayed in Night mode.

change the screen brightness in day

mode tap / on Day brightness bar

The brightness bar indicates the brightness level in day mode.

Warning:

Warning: Warning: Your Mio can heat up when the brightness

scale is set

high, therefore, use lower brightness whenever acceptable.

change the screen brightness in

night mode tap / on Night brightness bar

The brightness bar indicates the brightness level in night mode.

Warning:

Warning: Warning: Your Mio can heat up when the brightness

scale is set

high, therefore, use lower brightness whenever acceptable.

 Your preferences are automatically saved.

You can simply tap on the brightness bar so that the screen brightness will be set immediately at the

position you tapped.

Safety

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

enable/disable speed limit alerts,

which warn you of the speed limit

on any given road

 tap the Speed limit displa

Speed limit displa

Speed limit displaSpeed limit display

yy option to turn it On

OnOn or Off

Off

OffOff.

 tap Speed limit

Speed limit

Speed limitSpeed limit alerts

alerts

alerts alerts and select:

o Off:

Off:

Off:Off: disable the speed limit alert.

o Auto:

Auto:

Auto:Auto: set the system to alert automatically while your

speed is above the limit.

o Speed limit + 3 mph (Speed limit + 5 km/h)

Speed limit + 3 mph (Speed limit + 5 km/h)

Speed limit + 3 mph (Speed limit + 5 km/h)Speed limit + 3 mph (Speed limit + 5 km/h):

:: set the

system to alert while your speed is 3 mph (5 km/h) or

more above the limit.

o Speed limit + 7 mph (Speed limit

Speed limit + 7 mph (Speed limit

Speed limit + 7 mph (Speed limitSpeed limit + 7 mph (Speed limit + 10 km/h):

+ 10 km/h):

+ 10 km/h): + 10 km/h): set the

system to alert while your speed is 7 mph (10 km/h) or

more above the limit.

set the speed limit alerts manually tap Set manual speed aler

Set manual speed aler

Set manual speed alerSet manual speed alert

t t to select the speed limit or turn it off.

set how you want to be notified of

safety cameras

tap the Safety Camera

Safety Camera

Safety Camera Safety Camera / Mobile Safety

Mobile Safety

Mobile Safety Mobile Safety Camera

Camera

Camera Camera / Average Safety

Average Safety

Average Safety Average Safety

Camera

Camera Camera / Red Light Camera

Red Light Camera

Red Light Camera Red Light Camera option to turn it On

OnOn or Off

Off

OffOff.

 Your preferences are automatically saved.

Maps

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

view the map information tap Map Version

Map Version

Map VersionMap Version to display a list of all maps, providing the

following information:

 Name

 Date

 Version/Build number

 Coverage area

change the map colour scheme tap Map scheme

Map scheme

Map schemeMap scheme, then select a colour scheme from the list.

select a set of maps to load tap Map sets

Map sets

Map setsMap sets, then select your preference from the list.

 Your preferences are automatically saved.

Route options

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

set route type options for your route  tap Route type

Route type

Route typeRoute type.

The Route type screen will display. Select your route type

preference from the list:

o Fastest –

Fastest –

Fastest – Fastest – The route that should be the fastest when

navigating.

o Shortest –

Shortest –

Shortest –Shortest – The route with the shortest physical length.

o Easiest –

Easiest –

Easiest –Easiest – The simplest route with the least number of

turns and favours motorways where appropriate.

o Economical –

Economical –

Economical –Economical – The route with least number of stops, turns

and urban areas which should save on fuel usage.

set types of road options for your

route

 tap Types of road

Types of road

Types of roadTypes of road.

The Types of road screen will display. Select your road

preference form the list.

Avoiding ferry routes may prevent you from navigating

between certain countries, even when a bridge or tunnel exists.

 Your preferences are automatically saved.

Language

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

change the on-screen language tap Language

Language

Language Language and select your preferred language from the list.

change the voice scheme tap Voice

Voice

Voice Voice and select your preferred voice scheme from the list.

 Your preferences are automatically saved.

Units

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

change the distance units tap Distance units

Distance units

Distance unitsDistance units and then select your preferred distance unit

type.

change the time format tap Time format

Time format

Time formatTime format and then select your preferred time format.

change the date format tap Date Format

Date Format

Date FormatDate Format and then select your preferred date format type.

 Your preferences are automatically saved.

Device

Complete the following:

If you want to ...

If you want to ... If you want to ... Then ...

Then ...

Then ... Then ...

delete the saved information in your

Mio

tap Delete saved information

Delete saved information

Delete saved informationDelete saved information

 Tap Delete My Places

Delete My Places

Delete My PlacesDelete My Places and tap Yes

Yes

Yes Yes when the warning dialog

box displays. The data saved in My Places will be deleted.

 Tap Delete recen

Delete recen

Delete recenDelete recent locations

t locations

t locationst locations and tap Yes

Yes

Yes Yes when the warning

dialog box displays. The data of recent locations will be

deleted.

restore factory default settings tap Restore factory default

Restore factory default

Restore factory defaultRestore factory defaults

ss. When the warning dialog box

displays, tap Yes

Yes

Yes Yes. Your Mio will restart.

The Restore fact

Restore fact

Restore factRestore factory defaults

ory defaults

ory defaultsory defaults option allows you to restore

default factory settings but will not delete recent locations or

saved My Places destinations.

When you restore factory defaults, your LearnMe profile will

be cleared form the device.

Help

Tap About

About

AboutAbout to display copyright and trademark information.

What is MioMore Desktop?

MioMore Desktop is a suite of tools you can use to access greater functionality and product information via

your computer.

MioMore Desktop allows you to:

 obtain software updates

 manage maps

 manage custom POIs

 manage safety camera subscriptions

 browse the Mio website for special offers

Can I use MioMore Desktop with my computer?

Ensure your computer has the following minimum system requirements before installing MioMore Desktop:

 IBM compatible PC

 Microsoft Windows XP SP2/SP3, Windows XP x64, Windows Vista, or Windows 7

 Internet Explorer 6, 7 & 8

 DVD drive

 USB port

 Internet connection for activation

Microsoft .NET 2.0, 3.0 and 3.5 will be installed on your computer as part of the installation of MioMore

Desktop.

How do I install MioMore Desktop onto my computer?

Before you begi

Before you begiBefore you begin:

n: n: Ensure that your computer meets the minimum system requirements for MioMore

Desktop, especially:

i. Ensure that Internet Explorer 6 or higher is installed on you computer before you install MioMore Desktop,

even if it is not your default browser.

ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install

MioMore Desktop.

CAUTION:

CAUTION:CAUTION: When your Mio is turned on and connected to a computer, it is recognised as an external

mass-storage device. Do NOT delete any files that are pre-installed on your Mio. Deleting the files can cause

your Mio to crash.

1. Close all programs on your computer.

2. Insert the MioMore Desktop Application Installer DVD into your computer DVD drive. The MioMore

Desktop installer will start.

If your computer does not automatically launch the DVD, start the installation manually: Start  Run.

Type D:\Install.e

D:\Install.e

D:\Install.eD:\Install.exe

xexe where “D

DD” is the letter assigned to your DVD drive, then click OK

OKOK.

3. Select your preferred language for MioMore Desktop.

4. Click Install Software

Install Software

Install SoftwareInstall Software, then Install MioMore Desktop

Install MioMore Desktop

Install MioMore DesktopInstall MioMore Desktop.

5. Follow the screen prompts to install MioMore Desktop:

 Review and accept the Licence Agreement for MioMore Desktop when prompted.

 Select a destination folder for MioMore Desktop when prompted.

 When the installation is complete, click Finish

Finish

FinishFinish. MioMore Desktop will open.

6. If prompted to connect your Mio to your computer, complete the following:

 Plug the large end of the USB cable (may be sold separately) directly into a USB port on your

computer (not a USB hub) and plug the small end into the USB Socket ( ) on your Mio.

Where possible, plug the USB cable into a USB port at the back of your computer.

 Briefly press the power button to turn on your Mio.

The following screen will display on your Mio:

If prompted to update your Mio software, follow the on-screen prompts.

7. You are now ready to use MioMore Desktop for your Mio.

From now on, you can access MioMore Desktop via: Start

Start

StartStart All Programs

All Programs

All ProgramsAll Programs Mio

Mio

MioMio MioMore Des

MioMore Des

MioMore DesMioMore Desktop

ktop

ktopktop.

MioMore Desktop Menu

Depending on your Mio model, certain MioMore Desktop Menu options may not be available.

Component

Component Component Description

Description

Description Description

Mio Online

Mio Online Mio Online Display the Mio website, Mio Store and other online features.

My Subscriptions

My Subscriptions My Subscriptions Information on your current subscriptions, including safety camera

subscriptions.

My Maps

My Maps My Maps Install and manage maps.

Custom POIs

Custom POIs Custom POIs Application that allows you to import custom POIs.

Unlock Features

Unlock FeaturesUnlock Features

Allow you to enter the activation key for the service you purchased.

Redeem

Redeem Redeem Allow you to enter the product key for lifetime map update service.

MY MIO

MY MIOMY MIO A collection of applications that allow you to configure MioMore Desktop,

download updates, and transfer data to and from your Mio.

How do I update subscriptions on my Mio?

The My Subscriptions section will display a list of subscriptions already installed on your Mio:

Icon

Icon Icon Description

Description

Description Description

Red Expired subscriptions.

 Right click to purchase a new subscription.

Yellow Available subscriptions.

 Right click to update and purchase new subscription.

Green Active subscriptions.

No updates are available for these subscriptions.

How do I recover my subscription?

If your subscriptions are deleted and you want to recover them, click Recover Subscription

Recover Subscription

Recover SubscriptionRecover Subscriptions

ss at the

bottom-right corner in My Subscriptions to recover all subscriptions.

My Maps

My MapsMy Maps allows you to install new maps, remove maps from your Mio and purchase new maps.

The downloaded/purchased map (*.iso) from Mio Store website will be saved on your computer’s map

folder (e.g. C:\username\Documents\Maps) and then displayed in My Maps. The default map folder may vary

depending on your Operating System. You can change the setting of MioMore Desktop to locate the map folder

where you save the map by clicking MY MIO  Options  My Maps  Change.

MioMore Desktop  My Maps





Component

Component Component Description

Description

Description Description

Loadable Maps

Loadable MapsLoadable Maps A list of maps on the DVD or available for purchase via the Mio Store website.

 Select a map source (e.g. DVD Drive) and then click Open

Open

OpenOpen to display the Map

Source section.

 From the map Source section, click Install Maps

Install Maps

Install MapsInstall Maps to install the selected map to

your Mio. Otherwise, click Upwards

Upwards

UpwardsUpwards to return to the Loadable Maps section.

My Mio

My Mio My Mio A list of maps installed on your Mio.

Remove Maps

Remove MapsRemove Maps Click to remove the selected map from your Mio.

How do I download a map update?

Occasionally Mio may offer you free updates, including software applications, maps, voice commands, and

more. If a free map update is available and your Mio is connected to your computer, a message will display

when you first start MioMore Desktop.

1. From the pop-up message window, click View

View

ViewView to display the Device Updates screen that contains the

available updates.

2. Select the desired map update and click Download

Download

DownloadDownload. MioMore Desktop will start to download immediately.

Before downloading, you can change the download folder by clicking Chang

Chang

ChangChange Path

e Path

e Pathe Path.

3. During the download operation, you can:

 View the download status from the downloading bar.

 Stop the download by clicking .

 Pause the download by clicking , and then resume download at a later time by clicking .

4. When finished, the downloaded map update will be displayed in My Maps.

How do I install maps onto my Mio?

Your Mio comes with one or more pre-activated maps. Map files take up space on your Mio’s internal memory.

If you do not use a map file, you can remove it to free up space. You can later reinstall it to your Mio if required.

You can install maps from the following:

 DVD that came with your Mio,

 The downloaded map update,

 The map that you have purchased separately to a memory card (for the models with the MicroSD slot) or

your Mio internal memory.

You may need to purchase a Map Product Key to activate maps on the DVD that came with your Mio.

1. Open MioMore Desktop, and then click My Maps

My Maps

My MapsMy Maps.

2. Select a map source (e.g. DVD Drive when a Map DVD has been inserted into your computer DVD drive)

and then click Open

Open

OpenOpen to display the Map Source section.

 The maps already installed on your Mio are green.

 The maps that are unlocked and ready to be installed to your Mio are yellow.

 The maps that require activation before being installed to your Mio are red.

 The maps that are available for purchase from Mio are blue.

If your computer opens Windows Explorer when the DVD is inserted, close the Windows Explorer

window.

3. Complete the following:

If the map to be install

If the map to be installIf the map to be installed is …

ed is …

ed is … ed is … Then …

Then …

Then … Then …

yellow go to step 6.

red the map needs to be activated via the Internet before it can

be installed; continue to step 4.

4. If you connect to the Internet via a dial-up connection, connect to the Internet now.

5. Follow the prompts to activate your Map Product Key, including:

 Enter the Map Product Key when prompted.

 Your computer will connect to the Internet and activate your Map Product Key.

 When activation has completed, the map will change colour to yellow; continue to step 6.

6. Click the map you want to install to your Mio. The map will change colour to a brighter yellow to indicate

it has been selected. To deselect a map, click the map again.

You may need to install multiple maps to cover the required geographical area.

7. Complete the following:

If you want to …

If you want to … If you want to … Then …

Then …

Then … Then …

install a yellow map go back to step 6.

install a map the map needs to be activated red via the Internet before it can

be installed; go back to step 4.

install the selected maps to your Mio continue to step 8.

8. Select the destination media (Mio internal memory) for the selected maps, then click Install Maps

Install Maps

Install MapsInstall Maps.

The selected maps will be installed and change colour to green.

9. To use your Mio, disconnect the USB cable. You may need to manually reset your Mio.

WARNING:

WARNING: WARNING: Do not disconnect the USB cable from the Mio USB Socket until the installed map or

maps have changed colour to green.

How do I remove maps from my Mio?

1. Open MioMore Desktop, and then click My Maps

My Maps

My MapsMy Maps.

2. From the My Mio panel, select the check box next to the map you want to remove.

3. Click Remove Maps

Remove Maps

Remove MapsRemove Maps to remove the selected maps.

4. Confirm that you want to remove the selected map when prompted. The map is removed from your Mio.

You can reinstall these maps at any time via MioMore Desktop.

Custom POIs

Depending on your Mio model, some Custom POIs features may not be available.

MioMore Desktop  Custom POIs

The Custom POIs

Custom POIs

Custom POIsCustom POIs (Points of Interest) application allows you to create or import your own POI files. These are

called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Mio and can have audio

as well as visual alerts associated with them.

To create your POI files, open Microsoft Excel and then enter the POI location details (including Longitude,

Latitude, Name, and Description) in separate cells. Always use decimal degrees for coordinates and start a new

location from a new line. When done, click File

File

FileFile Save As

Save As

Save AsSave As to save it as a *.csv file. Now you have successfully

created a POI CSV file. The following displays the example of creating the POI file by using Microsoft Excel:

Various POI files are available for download free or by subscription from third-party websites. Ensure that

downloaded files are in .csv (Comma Separated Values) format. Mio is not responsible for the content or

accuracy of the information or the reliability or availability of these websites. The use of information regarding

safety camera locations may be subject to local laws in the country of use. You are responsible for checking

that you can use the information in your country or in the country where the information will be used.

How do I install custom Points of Interest?

1. In the Add new POIs

Add new POIs

Add new POIsAdd new POIs section, click Browse

Browse

Browse Browse to select a source file. The Open dialog box will open.

2. Select the file from your local or network drive, then click Open

Open

OpenOpen.

3. From the POI Category section:

If you want to …

If you want to … If you want to … Then …

Then …

Then … Then …

use an existing custom POI category select the Existing

Existing

Existing Existing category

Produktspezifikationen

Marke:	Mio
Kategorie:	Navigator
Modell:	Moov M410
Bildschirmauflösung:	480 x 272 Pixel
Touchscreen:	Ja
Bildschirmdiagonale:	4.3 Zoll
Eingebaute Lautsprecher:	Ja
Integrierte Kamera:	Nein
RAM-Kapazität:	64 MB
Prozessortaktfrequenz:	400 MHz
Bluetooth:	Nein
Akku-/Batteriekapazität:	720 mAh
Breite:	125.7 mm
Tiefe:	14.8 mm
Gewicht:	136.7 g
Produktfarbe:	Schwarz
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Höhe:	77.5 mm
Energiequelle:	Battery,Cigar lighter
Unterstützte Bänder:	Nicht unterstützt
Anzahl eingebauter Lautsprecher:	1
Natives Seitenverhältnis:	16:9
Anzahl Kanäle:	20 Kanäle
LED-Anzeigen:	Leistung
Schnittstelle:	Berührungsbildschrim
Formfaktor:	Tragbar / Fixiert
Prozessor:	Samsung 6443
Interne Speicherkapazität:	2 GB
Kompatible Speicherkarten:	Nicht unterstützt
Marine:	Nein
Sport (Fitness, Rennen):	Nein
Outdoor(Bergwandern, Trekking):	Nein
Geocaching:	Nein
Auto:	Nein
Luftfahrt:	Nein
Truck:	Ja
Traffic Message Channel (TMC):	Nein
Geschwindigkeitsbegrenzungen:	Ja
Kartenansicht:	3D
Voice-Landkarte:	Ja
Breitbild:	Ja
Anzahl Mini-USB 2.0 Anschlüsse:	1
Speichermedien Typ:	Flash
Spurführung:	Ja
Karten enthalten:	Ja
Kartenabdeckung:	Ganz Europa
Kanal der aktuellen Verkehrsmeldungen (TMC):	Nein
Fahrrad:	Nein
Wohnwagen / Caravan:	Nein
Golf:	Nein
Text-to-speech Nachrichtleser:	Ja
Display-Auflösung:	480 x 272 Pixel