Miele WCI670 TDos XL&Wifi Bedienungsanleitung

Miele Waschmaschine WCI670 TDos XL&Wifi

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Miele WCI670 TDos XL&Wifi (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

WCI 670 en - AU, NZ M.-Nr. 10 874 830/00

Before the first use Operating the washing machine Preparing the laundry Selecting a programme Adding detergent Starting the programme Extras

OPERATING THE WASHING MACHINE

PREPARING THE LAUNDRY/SELECTING A PROGRAMME

ADDING DETERGENT/STARTING THE PROGRAMME

3 5

ɉDamage resulting from incorrect

installation and connection.

Installing and connecting the washing

machine incorrectly will cause serious

damage.

Please read the separate operating

instructions supplied with the appliance.

ɉDamage resulting from failure to

remove the transit bars.

Failure to remove the transit bars can

result in damage to the washing machine

and to adjacent cabinetry or appliances.

Please read the separate operating

instructions supplied with the appliance.

Switching on the washing machine

ĺTurn the programme selector to the Cottons

programme.

The welcome tone will sound and the

welcome screen will light up.

The display will guide you through the initial

commissioning, which is divided into 5steps.

For further information please refer to the

separate operating instructions.

Operating the sensor controls

The sensor controls react to fingertip

contact. Selection is possible as long as the

respective sensor is illuminated.

If a sensor is brightly lit, this means:

currently selected

If a sensor is dimly lit, this means: selection

possible

1 Control panel

The control panel consists of a display

and various sensor controls.

2 Display

Values are shown and/or selected in the

display.

3 Sensor controls 

The values in the display can be

changed with the . sensors

4 OK sensor

The OK sensor is used to confirm

selected values.

5 TwinDos sensors with options for

Whites and Colours

The TwinDos sensor is used for

deactivating and activating automatic

detergent dispensing.

6 Optical interface

for service technicians.

7 Sensor controls for Extras

You can supplement wash programmes

with Extras.

8 Sensor 

You can view information about the

energy and water consumption of your

washing machine with the sensor.

9 Sensor 

The sensor starts the Delay start 

function or SmartStart.

10 Sensor 

You can specify the level of soiling of the

load in three settings. This sensor is only

active with the TwinDos option activated.

11 Start/Stop sensor

Touching the Start/Stop sensor starts

the selected programme or cancels a

programme that has already started.

12 Sensor 

Activates detergent dispensing with a

capsule.

13 Programme selector

For selecting programmes and switching

the washing machine off.

Washing environmentally and economically

–To get the most out of your machine,

load the maximum dry load for the

programme you are using.

–When smaller amounts of laundry are

washed, the Auto load control system

will reduce the amount of water and

energy used.

–Modern detergents make it possible to

wash at lower temperatures (e.g. 20°C).

Using lower temperature settings will

save energy.

–For precise dispensing, use automatic

detergent dispensing.

–Adjust the dosage to the degree of

soiling of the laundry.

–Selecting the highest possible spin

speed for the wash programme will

save energy when drying in a tumble

dryer afterwards.

1. Preparing the laundry

ĺEmpty all pockets.

ɉForeign objects (e.g. nails,

coins, paper clips, etc.) can

cause damage to garments and

components in the machine.

ĺSort the laundry by colour and by care label. Most

garments have a textile care label in the collar or side

seam.

ĺPre-treat stains and badly soiled areas (see the booklet

"Miele's guide to laundry care").

2. Selecting a programme

ĺTurn the programme selector to a programme.

Programme selection

There are three possible ways to select a programme:

1. Selecting standard programmes via the

programme selector

ĺTurn the programme selector to the required

programme.

The selected programme will appear in the display. This

will then be replaced by the standard display.

2. Selecting further programmes via the "Further

programmes/ setting and the display:"

ĺTurn the programme selector to the Further

programmes/ position.

Sportswear will appear in the display.

ĺTouch the sensors until the programme you want 

appears in the display.

ĺConfirm the programme with the sensor.OK

3. Selecting programmes via the MobileControl 

and the Miele@mobile app

ĺTurn the programme selector to the MobileControl 

position.

ĺTouch the sensor.Start⁄Stop

The washing machine can now be operated via a mobile

device using the Miele@mobile app.

1 Detergent dispenser drawer

2 Control panel

3 Access to drain filter, drain pump

and emergency release

4 Door

5 Access panel for TwinDos

containers

3. Loading the washing machine

Opening the door

ĺReach under the door grip and

pull the door open.

ĺUnfold the laundry and load

loosely in the drum.

Closing the door

ĺMake sure that no items are

caught between the door and

the seal.

ĺShut the door with a gentle

swing.

4. Selecting programme settings

Selecting a temperature/spin speed

ĺTouch the sensors above or below the temperature 

or spin speed value in the display until the temperature/

spin speed you want appears in the display.

Selecting Extras

There are two ways of selecting Extras.

1. Directly above the sensor controls

ĺTouch the sensor for the Extra you want. It then lights up

brightly.

2. Via the Extras sensor control and the display

ĺTouch the sensor control.Extras

The following appears in the display: No Extras 

ĺTouch the sensor controls until the Extra you want 

appears in the display and confirm this with the OK

sensor.

 Degree of soiling

The sensor is only active when the 

TwinDos option is activated.

– light

No visible soiling or stains

– normal

Visibly soiled and⁄or just a few slight

stains

– heavy

Heavily soiled and⁄or clearly visible stains

 Delay start/SmartStart

Delay start

With Delay start you can delay the start of

a programme. The start of the programme

can be delayed from 15 minutes up to a

maximum of 24 hours.

SmartStart (only functional in selected

countries)

The SmartStart function lets you define

a time period during which your washing

machine will start automatically. The

machine will start on receipt of a signal, e.g.

from your energy supplier, that indicates

that the electricity tariff is particularly

economical.

5. Adding detergent

There are several options for adding

detergent.

TwinDos

TwinDos dispensing is automatically

activated for all programmes in which

dispensing is possible.

Changing TwinDos dispensing

You can change the suggested colour

composition of the laundry.

ĺTouch the sensor for or .Whites Colours

Deactivating TwinDos dispensing

ĺTouch the TwinDos sensor.

The sensor control is only dimly lit and

dispensing is deactivated.

Filling with detergent

Any detergent suitable for automatic front

loading washing machines can be used

with this appliance. Please observe the

instructions for use and dosage on the

detergent packaging.

Ensure that TwinDos dispensing is

deactivated.

ĺPull out the

detergent drawer

and add

detergent to the

compartments.

Detergent for the pre-wash

Detergent for the main wash,

including Soak if selected

 /  Fabric softener, liquid starch or

capsules

Using detergent tablets or pods

Always put detergent tablets or pods

directly in the drum with the laundry.

They cannot be added via the detergent

dispenser drawer.

CapDosing

Three different types of capsules are

available:

Fabric care (e.g. fabric conditioner)

Additives (e.g. detergent enhancers)

Detergent

Each capsule contains the correct amount

for one wash cycle.

Capsules are available to order from Miele

or from the Miele online shop (see the end

of this booklet for contact details).

Keep capsules out of the reach of

children.

Activating CapDosing

ĺTouch the sensor.

The following appears in the display:

No cap 

ĺTouch the sensors until the capsule 

you want appears in the display.

ĺConfirm the capsule with the sensor.OK

See "Detergent" in the operating

instructions for more information.

6. Starting the programme - end

of the programme

Starting the programme

ĺTouch the flashing sensor.Start/Stop

The door will lock ( appears in the display) 

and the programme will start.

At the end of the programme

The door is still locked during the Anti-

crease phase and the following will appear

alternately in the display:

 Finish/Anti-crease and

 Press Start/Stop

ĺTouch the sensor. The door Start/Stop

will be unlocked.

ĺPull open the door.

ĺRemove the laundry.

Check that all items have been removed

from the drum.

ĺCheck the folds

in the door seal

for any small

articles, e.g.

buttons, which

might be lodged

there.

ĺTurn the programme selector to the 

position. This switches the washing

machine off.

ĺIf applicable, remove the used capsule

from the detergent dispenser drawer.

Close the door. Otherwise there is

a danger of objects being placed

inadvertently in the drum. If these remain

unnoticed and were washed in the next

load, they could damage the laundry. An

open door is also a danger to pets and

children.

Extras

You can use the Extras sensor to augment

the wash programmes.

Short

The programme duration is reduced.

Mechanical action and energy usage are

increased.

Pre-ironing

In order to reduce creasing, the laundry

undergoes a smoothing process at the

end of the programme. Reducing the

maximum load by 50% will give a better

result. Follow the instructions in the

display. Small loads give a better result.

The garments must be suitable for drying

in a tumble dryer and suitable for  

ironing  .

Water +

The water level in the wash and rinse

stages is increased and a second rinse is

carried out in the "Separate rinse/Starch"

programme.

You can select other functions for the

Water + sensor control. These are

described in "Settings".

Pre-wash

For laundry with large amounts of dirt, e.g.

dust and sand.

Stains

For cleaning stained laundry. The

programme sequence is altered with this

option.

Soak

For heavily soiled and stained items with

protein stains.

A duration of between 30minutes

and 6hours can be chosen for the

soak process. See "Settings" for more

information.

The factory default setting is 30minutes.

Intensive

For hard-wearing laundry that is very

heavily soiled. Cleaning efficiency

is increased through more intense

mechanical action and the application of

more heat energy.

Extra quiet

This option reduces noise levels during

the wash programme. Use this if you

want to wash during quiet periods (for

instance, when children are sleeping). The

final spin is automatically reduced to 

(Rinse hold). The programme duration is

increased.

Extra gentle

Drum rotation and wash duration are

reduced. Lightly soiled fabrics are washed

more gently.

AllergoWash

This option should be used where high

standards of hygiene are required. More

energy is used to lengthen temperature

holding times and more water is used to

increase rinsing efficiency. The items must

be suitable for drying in a tumble dryer 

  . and suitable for ironing

en - AU, NZ M.-Nr. 10 874 830

Cleaning and careProgramme chart Detergent Problem solving guide

PROGRAMME CHART

CLEANING AND CARE

PROBLEM SOLVING GUIDE

Quick Start Guide

Washing machine

These short instructions are not a substitute for the operating instructions supplied

with the appliance. Please read the operating instructions supplied with your washing

machine before using it for the first time and take note of the Warning and Safety

instructions, as well as the full descriptions on how to use your appliance.

Programme Load (inkg) Temperature Items Extras

Cottons 9.0 Cold to 90°C Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,

underwear, T-shirts etc.

, , , ,

, , , ,

, 

Minimum iron 4.0 Cold to 60°C Synthetic, mixed fibre and easy care cotton. , , , ,

, , , ,

, 

Delicates 3.0 Cold to 60°C Delicate garments made from synthetic fibre, mixed fibre, rayon and

viscose.

, , , ,

, , , , 

Woollens 2.0 Cold to 40°C Machine-washable or hand-washable wool or wool blend fabric. If the

care label does not specify a temperature, wash using the cold setting.



Silks 1.0 Cold to 30°C Silks and other hand-washable fabrics with no wool content, e.g. satin,

lace and silk.



Shirts 1.0 ⁄ 2.0 Cold to 60°C Shirts and blouses made of cotton and mixed fibre.

If the preset Pre-ironingoption is switched off, the maximum load

capacity is increased to 2.0kg.

, , , ,

, , , , 

MobileControl – – The Miele@mobile app is used for selecting programmes and operating

the machine.

–

Express 20 3.5 Cold to 40°C Cotton garments that have hardly been worn or are only very lightly

soiled.

, 

Dark garments/

Denim

3.0 Cold to 60°C Black and dark garments made from cotton, mixed fibres and denim. , , , ,

, , , , 

Outerwear 2.5 Cold to 40°C Performance outerwear (e.g. jackets and trousers) made from

membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®

etc.

, , , ,

, , 

Proofing 2.5 40°C Treating microfibre fabric, skiwear and table linen made from mainly

synthetic fibres to provide a water and dirt resistant finish.

–

Sportswear 3.0 Cold to 60°C Sportswear such as jersey shirts and leggings, and microfibre and

fleece garments.

, , , ,

, , , 

Automatic plus 6.0 Cold to 40°C Mixed loads of garments sorted according to colour which are suitable

for the and programmes.Cottons Minimum iron

, , , ,

, , , , 

Pillows 2 (40x80cm)

1 (80x80cm)

Cold to 60°C Synthetic filled washable pillows. , , , ,

, , 

Curtains 2.0 Cold to 40°C Curtains, including net curtains, specified as machine-washable by the

manufacturer.

, , , ,

, , , 

Down filled items 2.0 Cold to 60°C Jackets, sleeping bags, pillows and other down-filled items. , , , ,

, , , 

First wash 3.0 Cold to 40°C New items made of cotton, towelling and polyester fabric. , , , 

Down duvets 2.5 Cold to 60°C Quilts, duvets and pillows with feather or down filling. , , , ,

, , 

Separate rinse/

Starch

8.0 – For rinsing items washed by hand.

Starching table cloths, serviettes and workwear.



Drain/Spin 8.0 – Drain only: Select for the spin speed.0 rpm –

Clean machine No

load

85°C With frequent washing at low temperatures there is a danger of a

build-up of bacteria in the washing machine.

Cleaning the washing machine will significantly reduce bacteria, mould,

and biofilm, and prevent the build-up of unpleasant odours.



  = Short; = Pre-ironing; = Water+; = Stains; = Pre-wash; = Soak; = Intensive; = Extra quiet; = Extra gentle; = AllergoWash       

Miele recommended detergents

Programmes

Miele

UltraPhase

1/2

Miele

Cap 

Miele

Cap 

Miele

Cap 

Cottons – 

Minimum iron – 

Delicates   –

Woollens –– –

Silks –– –

Shirts – 

Express 20 – –

Dark garments/

Denim

– –

Outerwear –– – –

Proofing –– – –

Sportswear –– –

Automatic plus – 

Pillows – – –

Curtains – – 

Down filled items –– –

First wash – –

Down duvets –– –

Separate rinse/

Starch

–/– –/– –/–/–

 = recommended; – = not recommended

   = Sportswear; = Down Items; = WoolCare, = Fabric Softener; = Booster 

Cleaning the drum (Hygiene info)

Washing at low temperatures and/or using

liquid detergents can cause bacteria and

odours to build up in the washing machine.

Use the Clean machine programme to

clean the machine. Note the message in the

display:.

 Hygiene info:

Run a programme at min.

75°C or "Clean machine"

Cleaning the TwinDos system

ɉDamage resulting from dried washing

detergent.

If the system has not been used for a

long time (more than two months), the

detergent in the hoses can become

viscous or dry out. The hoses can

become blocked and would then need to

be cleaned by a service technician.

Clean the TwinDos system.

To clean the system, a refillable TwinDos

container is required (sold separately),

available online at shop.miele.com.

Cleaning the detergent dispenser

drawer

Washing at low temperatures and the use

of liquid detergent can lead to a build-up

of mould and bacteria in the detergent

dispenser drawer.

ĺClean the entire drawer at regular

intervals for hygiene reasons, even if you

are using the TwinDos system exclusively.

ĺPull out the

detergent

dispenser drawer

until a resistance

is felt.

ĺPress down the release button and, at

the same time, pull the drawer right out of

the machine.

ĺClean the detergent dispenser drawer

with warm water.

Cleaning the siphon and the fabric

softener channel

ĺPull the siphon

out of the

compartment

and clean it

under warm

running water.

ĺClean the siphon tube in the same way.

ĺRefit the siphon.

ĺClean the fabric

softener channel

using a brush

and warm water.

ɉLiquid starch can cause the siphon

to become clogged. Make sure that

you clean the siphon and siphon tube

particularly thoroughly after using liquid

starch a few times.

Cleaning the detergent dispenser

drawer housing

ĺUse a bottle brush to remove detergent

residues and limescale from the jets

inside the detergent dispenser drawer

housing.

Some of the messages in the display are more than one line long. Touch the or sensor  

to read them in full.

Message Possible cause and remedy

The control panel

remains dark.

There is no power to the machine.

ĺCheck whether the mains plug is plugged in and switched on.

ĺCheck whether the fuse or circuit breaker has tripped.

The washing machine has switched off automatically to save

energy.

ĺSwitch the washing machine on again by turning the programme

selector.

 Door lock. 

Service

The door is not closed properly. The door lock could not engage.

ĺClose the door again.

ĺRestart the programme. If the fault message appears again,

contact Miele.

 Check drainage.

See 

The water outlet is blocked or restricted. The drain hose has been

fixed too high.

ĺClean the drain filter and the pump.

ĺCheck whether the maximum delivery head of 1m has been

exceeded.

 Water intake. See



The water inlet is blocked or restricted.

ĺCheck whether the tap is turned on properly.

ĺCheck whether the inlet hose is kinked.

ĺCheck whether there is sufficient water pressure.

The filter in the water inlet is blocked.

ĺClean the filter (see the operating instructions).

 Waterproof syst. .

 Service.

The water protection system has reacted.

ĺTurn off the tap.

ĺCall Miele.

  Service. Fault F There is a fault.

ĺDisconnect the washing machine from the main electricity

supply, either by switching it off at the wall socket and

withdrawing the plug, or by disconnecting it at the circuit

breaker.

ĺWait before reconnecting the washing at least 2 minutes

machine to the main electricity supply.

ĺThen switch the washing machine on again.

ĺRestart the programme.

If the fault message appears again, contact Miele.

 Door jammed.

 Service.

The door lock has jammed.

ĺCall Miele.

Message Possible cause and remedy

 Check detergent Excessive foam has built up during washing.

ĺCheck the amount of detergent dispensed.

ĺWith automatic detergent dispensing, check the dosage amount

set.

ĺObserve the instructions on the detergent packaging and the

degree of soiling of the laundry.

ĺIf necessary, reduce the dosage amount by increments of 10%.

 Hygiene information:

Use a programme with

min.

75°C or "Clean

machine"

A programme using a temperature above 60°C has not been run

for a long time.

ĺTurn the programme selector to Further programmes/ and

select the programme in the submenu.Clean machine Care

ĺRun the programme using Miele IntenseClean or a Clean Machine

universal powder detergent.

This will clean the washing machine and prevent a build-up of

bacteria and odours.

 Levelling the machine The Extra which runs at the end of the programme Pre-ironing

could not be carried out properly.

ĺCheck whether the washing machine is aligned correctly

as described in "Installation and connection – Levelling the

machine".

ĺCheck whether the maximum delivery head of 1m has been

exceeded.

If the fault message appears again, contact Miele. The washing

machine can still be used, however without the Extra.Pre-ironing

 UltraPhase 1 almost

empty Only a few

more programmes are

possible

The detergent in the cartridge is running low. There are between

4and 8wash cycles remaining.

ĺOrder a new cartridge.

 Use TwinDos or start

Maintenance

See 

TwinDos or automatic dispensing via compartment and⁄or  

has not been used for a long time.

ĺUse TwinDos for one of your next loads.

ĺCarry out the TwinDos maintenance programme as described in

"Cleaning and care - TwinDos maintenance".

 TwinDos

maintenance for

compartment  must

be started See 

TwinDos or automatic dispensing via compartment and⁄or  

has not been used for a long time. It is possible that detergent has

dried inside the hoses.

ĺCarry out the TwinDos maintenance programme immediately

as described in "Cleaning and care - TwinDos maintenance".

The messages will appear at the end of the programme and when the washing machine is

switched on and need to be confirmed with the sensor.OK

Produktspezifikationen

Marke:	Miele
Kategorie:	Waschmaschine
Modell:	WCI670 TDos XL&Wifi
Breite:	596 mm
Tiefe:	636 mm
Gewicht:	94000 g
Produktfarbe:	Weiß
Steuerung:	Rotary, Touch
Höhe:	850 mm
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 Hz
Eingebautes Display:	Ja
Zertifizierung:	CE
Geräteplatzierung:	Freistehend
Kabellänge:	2 m
Waschprogramme:	Black, Blouse/shirt, Cold, Cotton, Hand/wool, Intensive/outdoor, Jeans/denim, Quick, Silent, Sport, Delicate/silk
Maximale Schleuderdrehzahl:	1600 RPM
Startzeitvorwahl:	Ja
Anpassbare Rotationsgeschwindigkeit:	Ja
Luftschallemission (Schleudern):	72 dB
Luftschallemmission (Waschen):	46 dB
Energieeffizienzklasse (alt):	A+++
Jährlicher Energieverbrauch Waschen:	196 kWh
Ladetyp:	Frontlader
Anschlusswert:	2400 W
Stromstärke:	10 A
Energieverbrauch Reinigung:	1 kWh
Nennkapazität:	9 kg
Halbe Beladung:	Ja
Trommelmaterial:	Edelstahl
Türanschlag:	Rechts
Türfarbe:	Chrom
Tiefe bei geöffneter Tür:	1077 mm
Einschalteverzögerung (max.):	24 h
Kindersicherung:	Ja
Wasserverbrauch pro Zyklus:	54 l
Jährlicher Wasserverbrauch Waschen:	11000 l
Schleuder-Klasse:	A
Rückstandsfeuchtigkeit:	44 %
Ladungsausgleichsystem:	Nein
Aquastop Funktion:	Ja
Restzeitanzeige:	Ja
Dosierungsassistent:	Ja
Zykluszeit (max.):	179 min
Stromverbrauch (aus):	0.4 W
Wasserkapazität:	kalt
Alarm:	Ja
Sichtfenster:	Ja
Schaumkontrollsystem:	Ja
Spül-Plus-Funktion:	Ja
Wi-Fi-gesteuert:	Ja
Einstellbare Temperatur:	Ja
Niedrige Einbaufähigkeit (nach oben offen):	Ja
Fleckenentferneroption:	Ja
Automatisches Dosiersystem:	Ja
Zykluszeit (Schnellwaschprogramm):	20 min
LED Programm-Kontrollleuchte:	Ja
Selbstreinigende Waschmittelschublade:	Ja