Midland LXT600BB Bedienungsanleitung

Midland Radio LXT600BB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Midland LXT600BB (4 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 45 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Welcome to the world of Midland electronics

Congratulations on your purchase of a high quality MIDLAND

product. Your 2-way radio represents state-of-the-art high-tech

engineering and is designed for FRS (Family Radio Service)

operation. It is a quality piece of electronic equipment, skillfully

constructed with the finest components. The circuitry is all solid-state

and mounted on a rugged printed circuit board. Your two-way radio is

designed for reliable and trouble-free performance for years to come.

Features

- 36 FRS Channels

- 121 Privacy Codes (38 CTCSS / 83 DCS)

- VOX

- Selectable Call Alert

- NOAA Weather Scan

- NOAA Weather Radio

- NOAA Weather Alert

- Scan Function

- Monitor Function

- Roger Beep Tone

- Silent Operation

- Key Pad Lock

- Power High / Low Settings

- Speaker / Microphone Jacks

- Battery Meter / Battery Low Indicator

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device does not cause

harmful interference, and (2) this radio must accept any interference

that may cause undesired operation.

To maintain compliance with FCC’s RF exposure guidelines, for

body-worn operation, this radio has been tested and meets the FCC RF

exposure guidelines when used with Midland Radio Corp. accessories

supplied or designated for this product. Use of other accessories may

not ensure compliance with FCC RF exposure guidelines.

IMPORTANT: Changes or modifications to this unit not expressly

approved by MIDLAND RADIO CORP. could void your right to operate

this unit. Your radio is set up to transmit a regulated signal on an

assigned frequency. It is against the law to alter or adjust the settings

inside the COMMUNICATOR to exceed those limitations. Any adjustment

to your radio must be made by qualified technicians.

LCD DISPLAY

1. KEY LOCK ICON – Indicates KEY

LOCK mode is on.

2. VOX ICON – Indicates when VOX mode

is active.

3. NOAA WEATHER (WX) BAND ICON–

Indicates when the radio is in Weather

Band mode.

4. CHANNEL NUMBER – Changes from

1~36 on FRS band (1~10 on WX band).

5. PRIVACY CODE – Indicates Privacy

Code selected by user (oF~38/oF~83). It

can only be set in Ch 1~22.

6. BATTERY METER – Indicates the battery

level.

7. RECEIVE (RX) ICON – Indicates radio is

receiving a transmission.

8. TRANSMIT (TX) ICON – Indicates radio

is transmitting a signal.

9. TRANSMIT POWER LEVEL ICON –

Indicates TX Power setting (H/L).

10. PRIVACY CODE ICON – Indicates

Privacy Code setting (CTCSS/DCS).

CONTROLS

11. POWER/VOLUME KNOB – Turn clock-

wise to turn the power on and increase

the volume level. Turn counter-clockwise

to decrease the volume level and turn

the power off.

12. PTT Button – Press and hold to

transmit voice communication.

13. CALL/LOCK Button – Press to send a

CALL ALERT signal. Press and hold to

turn KEY LOCK on/off.

14. MIC – Built-in microphone.

15. SPEAKER – Built-in speaker.

16. ANTENNA

17. EXTERNAL SPEAKER/MIC/CHG

JACK

18. MENU Button – Press momentarily to

access Menu mode.

19. MONITOR/SCAN Button – Press to

enter SCAN mode. Press and hold to

enter MONITOR mode.

20. UP/WX SCAN s

ss and DOWN t

Buttons – Make adjustments in MENU

mode. Press and hold the UP button for

5 seconds to activate the NOAA

Weather Scan function.

BATTERY INSTALLATION

Your radio operates with either a NiMH battery pack or optional 3 AAA

alkaline batteries. The belt clip should be removed (see below) to

ease installation or removal of the batteries.

To install the batteries:

1. With the back of the radio facing you, remove the belt clip (see

diagram below) for easy access, then remove the Battery Cover by

pressing down on the top center and sliding it down from the radio.

2. Insert 3 AAA batteries observing the polarity as shown. Installing

the batteries incorrectly will prevent the unit from operating or may

damage the unit.

3. Return the Battery Cover by sliding it up on the radio. Replace the

belt clip, making sure it locks into place.

BATTERY

COMPARTMENT

BATTERY

COMPARTMENT

COVER

Press here and

push down to open

BELT CLIP

LOCK TAB

BELT CLIP

LATCH

INSTALLING THE BELT CLIP

To install the BELT CLIP, slide the clip down into the slot on the back

of the radio until the BELT CLIP LATCH clicks. To remove the BELT

CLIP LOCK TAB, press the down, then gently pull the belt clip up

toward the top of the radio.

MIDLAND RADIO CORPORATION

MIDLAND RADIO CORPORATIONMIDLAND RADIO CORPORATION

5900 Parretta Drive

Kansas City, MO 64120

Call 816.241.8500

We’d love to hear from you! Let us know what you

think of your new Midland product at

or by visiting us at

midlandusa.com

Note: Features & Specifications are subject to change without

notice. MIDLAND is not responsible for unintentional errors or

omissions on its packaging.

Your radio is equipped for using a rechargeable NiMH battery pack

which can be recharged by inserting the AC adapter into the

desktop charger (as described below). Initial charge time is 24

hours. Charge time is about 12 hours thereafter. For maximum

battery life, we recommend charging the battery pack when the low

battery icon comes on. Remove the radios from the charger when the

charge time expires.

To charge using a Desktop Charger:

1. Place the rechargeable battery packs in the radios.

2. Connect the AC adapter into an AC wall outlet.

3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if

charging in vehicle) into the desktop charger jack.

4. Place the units into the desktop charger slot and note that the LED

indicator with color will light up, indicating charging function.RED

In order to ensure that the battery pack is fully charged, it is

recommended that the battery pack be charged for at least 12

hours with the radio turned OFF.

1. Only use the Midland NiMH battery pack and AC adapter.

2. Do not attempt to charge alkaline batteries or any batteries

or battery packs other than the one indicated in the

manual. This may cause leakage and damage to the radio.

3. For long term storage of the radio, turn the radio OFF and

remove the batteries from the radio.

BATTERY LEVEL INDICATOR

Your radio has a BATTERY LEVEL METER that shows the

battery power level. The greater the number of bars visible, the

stronger the battery level. When the battery level is low, the Battery

Shell icon will flash in the display indicating your batteries

should be replaced or recharged if using a rechargeable battery pack.

CHARGING THE BATTERY PACK

POWER ON/OFF AND VOLUME

Rotate the knob clockwise to turn the radio onPOWER/VOLUME

and increase the volume level. Rotate the control counter-clockwise

to reduce the volume level and to turn the radio off. During Power On,

the radio will beep 2 times with different tones, the LCD will display

all icons for 1 second and the LCD display will indicate the last

channel selected.

TRANSMITTING AND RECEIVING A CALL

To communicate, all radios in your group must be set to the same

channel and/or Privacy Code.

1. For maximum clarity, hold the radio 2 to 3 inches from your

mouth.

2. Press and hold the button and speak in a normal voicePTT

into the icon will appear continuouslymicrophone. The TX

on the LCD display while transmitting.

3. To receive a call, release the icon willPTT button. The RX

appear on the display when your radio is receiving a transmision.

ABOUT RANGE

Your LXT Series radios are designed to give you maximum range

under optimum conditions.

Optimum Conditions are:

lOver water

lOpen rural areas without obstructions

lFlat areas where you can see the other person

To ensure you get maximum range:

lBe sure to use fresh or fully charged batteries - low batteries will

cause low power conditions.

lBe sure to set your radio to use Hi power.

OPERATING YOUR RADIO LXT600/630/650 SERIES QUICK REFERENCE CHART

MONITOR

Pressing and holding the button for 3 seconds will let youMONITOR

hear noise so you can adjust the volume level of the radio when not

receiving a signal. This could also be used to check any activity on

your current channel before transmitting.

Press and hold the button for 3 seconds again to get outMONITOR

of mode.MONITOR

SCAN

Your radio can scan all 36 channels for activity. To enter, quickly

press the button. Repeat the same procedure to exit. YourSCAN

radio will rapidly scan each of the 36 channels and stop on any active

channel for 4 seconds before resuming scan.

When you press the button to transmit on an active channel, thePTT

scanning function will stop and remain on the active channel. To

resume scanning, quickly press the SCAN button.

CALL ALERT

Your radio can transmit a call alert for a fixed length of time. To send

a call alert, press the icon will appear whileCALL button. The TX

transmitting a call alert and a tone can be heard on the speaker for

confirmation.

KEYPAD LOCK

To avoid accidentally changing the radio setting, press the LOCK

button for 4 seconds. The KEY LOCK icon will appear on the display.

PTT CALLand will still be active. Repeat the same procedure to

unlock the keypad.

CHANNEL SELECTION (FRS BAND)

Press the button once, and then the MENU s

ss t

tt\buttons to select

one of the 36 FRS channels. To confirm the selection, press the PTT

button or press the button again to move to the next featureMENU

setting.

MENU Channel VOX

1~36

Privacy

Roger Beep

On/Off

Power

H/L

Call Alert

1~5

WX Channel

1~10

Silent Operat ion

On/Off

oF/1/2/3

CTCSS

DCS

oF~38

oF~83

WX Alert

On/Off

WX Scan

1~10

Press and hold UP/WX

button for 5 seconds

SETTING PRIVACY CODES

Your radio has 121 available to use in channelsPrivacy Codes

1~22. The selected Privacy Code may be different for each channel.

To select a Privacy Code for the current channel press the MENU

button twice, and then the s

ss t

tt\buttons to select one of the 38

CTCSS Privacy Codes. Press the MENU button again and then the

ss\t

t t buttons to select one of the 83 Privacy Codes. TheDCS

Privacy Code icon on the display will indicate whether you set your

Privacy Code in mode. To confirm the selection,CTCSS DCSor

press the button or press the button again to move to thePTT MENU

next feature setting.

Note : If you select a CTCSS Privacy Code, any pre-selected

DCS Privacy Code will be cancelled and vice-versa.

Selecting a Privacy Code of will disable the Privacy feature." "oF

To communicate between two radios, all radios in your group

must be set to the same channel and/or Privacy Code selections.

The Privacy Code can only be set in channels 1~22.

TRANSMIT (TX) POWER LEVEL SELECTION

Your radio has 2 power level settings. To select the power level on

channels 1~7 and 15~36, press the button until a “ ” icon willMENU Pr

appear blinking on the display. Then press the s

ss t

tt\buttons to select

TRANSMIT POWER LEVEL icon (H: /L: Hi Lo). To confirm, press the

PTT MENUbutton or press the button again to move to the next

feature setting. When the PTT button is pressed during Lo

Battery Level condition, the TX Power will automatically switch

from Hi(H) to Lo(L) level.

Note : You cannot adjust the power setting on channels

8~14. They are set to Lo power per FCC regulations.

VOX

Your radio has 3 VOX level settings: (oF/1/2/3).

To set VOX, press the button until the display shows “MENU VOX”

blinking while on the right of the display, anCHANNEL NUMBER

“ ”,“oF” icon appears. Select “1 2” or “3” by pressing the s

ss t

tt\buttons

and push the key, or press the button again to move toPTT MENU

the next feature setting.

Rev F

IMPORTANT NOTICE

Exposure To Radio Frequency Energy

Your Midland radio is designed to comply with the following national and

international standards and guidelines regarding exposure of human

beings to radio frequency electromagnetic energy:

- United States Federal Communications Commission, Code of Federal

Regulations: 47 CFR part 2 sub-part J

- American National Standards Institute (ANSI)/Institute of Electrical &

Electronic Engineers (IEEE) C95. 1-1992

- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999

Edition

- National Council on Radiation Protection and Measurements (NCRP) of

the United States, Report 86, 1986

- International Commission on Non-lonizing Radiation Protection

(ICNIRP) 1998

To control your exposure and ensure compliance with the general

population or uncontrolled environment exposure limits, transmit no more

than 50% of the time. The radio generates measurable RF energy

exposure only when transmitting.

Body-Worn Operation

If you wear the radio on your body when transmitting always use Midland-

supplied or approved belt clip, holster, case, or body harness for this

product. Use of any accessories not supplied or approved by Midland may

exceed FCC/Health Canada RF exposure guidelines. If you do not use

any accessories supplied or approved by Midland, ensure the radio and

its antenna are at least 1 inch (2.5cm) from your body when

ransmitting.

VOX will be more sensitive on the “ ” “ ”1setting than on the 3setting.

To turn VOX off, press the button until the display showsMENU

“ display,VOX” blinking while on the right of the CHANNEL NUMBER

a “ ” or “ ” icon appears. Select “ ” by pressing the 1 2”,“ 3 oF s

ss t

tt\

buttons and push the key, or press the button again toPTT MENU

move to the next feature setting.

ROGER BEEP (end of transmission) TONE

When the button is released, the radio will beep to confirm toPTT

other users that your transmission has finished.

To turn the tone on, press the button until theROGER BEEP MENU

display shows a “ ” icon while on the right of the “ ” display, an “rb rb oF”

icon appears. Select “ ” by pressing the on s

ss t

tt\buttons and push the

PTT key, or press the button to move to the next featureMENU

setting.

To turn the tone off, press the button until theROGER BEEP MENU

display shows a “ ” icon while on the right of the “ ” display, an “rb rb on”

icon appears. Select “ ” by pressing the oF s

ss t

tt\buttons and push the

PTT key, or press the button to move to the next featureMENU

setting.

CALL ALERT SELECTION

Your radio has 5 selectable CALL ALERTS.

To select, press the button until a “ ” icon appears and toMENU CA

the right of the “ ” icon the current setting isCA CALL ALERT

displayed. Then press the s

ss t

tt\buttons to make the CALL ALERT

selections - the radio will emit a corresponding tone for each

selection. To confirm, press the button or press the PTT MENU

button to move to the next feature setting.

SILENT OPERATION

Your radio has a SILENT OPERATION mode. In this mode, all

“beeps” and “tones” are disabled.

To turn the SILENT OPERATION mode on, press the MENU button

until the display shows a “ ” icon while on the right of the “bP bP”

display, an “ ” icon appears. Select “ ” by pressing the on oF s

ss t

tt\

buttons and push the key or PTT MENU button.

To turn the SILENT OPERATION mode off, press the MENU button

until the display shows a “ ” icon while on the right of the “bP bP”

display, an “ ” icon appears. Select “ ” by pressing the oF on s

ss t

tt\

buttons and push the key or PTT MENU button.

NOAA WEATHER RADIO/SCAN

Your radio has a NOAA WEATHER RADIO function, to enable the

user to receive weather reports from designated NOAA stations.

Your radio also has a NOAA WEATHER SCAN function to enable the

user to scan all 10 channels of the NOAA WEATHER RADIO. To turn

the NOAA WEATHER SCAN on, press and hold the UP/WX s

button for 5 seconds while in FRS mode. The radio will go to WX

Band mode and start scanning all 10 channels and stop on any

active channel. When the channel becomes inactive for 10 seconds

the radio will resume scanning.

To stop the NOAA WEATHER (WX) SCAN and set the channel

manually on the , press the button during WX Band MENU NOAA

WEATHER (WX) SCAN. The radio will stop scanning and the display

will show the current channel setting and the WX Band WX Band

icon. While on mode press the WX Band s

ss t

tt\buttons to select one

of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press

the PTT button or press the MENU button to move to the next feature

setting.

To turn the NOAA WEATHER RADIO off, press the PTT button. The

current iconFRS radio setting will be displayed and the WX BAND

will go off.

NOAA WEATHER ALERT

Your radio has a NOAA WEATHER ALERT function, to enable you

to automatically receive weather alerts from designated NOAA

stations.

The NOAA WEATHER (WX) ALERT is automatically on during

NOAA WEATHER SCAN mode.

To turn the NOAA WEATHER (WX) ALERT on during normal NOAA

WEATHER RADIO mode, press the MENU button twice while in

NOAA WEATHER SCAN mode. The display shows while on"AL ",

the right an icon appears blinking. Select by pressing the"oF" "on"

ss\t

t t buttons.

To confirm, press the button or press . The radio willPTT MENU

return to and the will continue blinking. IfWX BAND WX BAND icon

the radio receives a signal from a designated WX ALERT NOAA

station while on mode, the radio will beep for 10 secondsFRS Radio

while an icon appear on the display, after which it will"AL" "In"and

automatically go to WX BAND.

If any button is pressed during beeping while on FRS Radio mode,

the radio will automatically go to WX BAND.

To turn the NOAA WEATHER (WX) ALERT off, press the MENU

button twice while in . The display shows while on theWX Band "AL ",

right an icon appears blinking. Select by pressing the"on" "oF"

ss\t

t t buttons. To confirm, press the button or press PTT MENU.

Note : The WX Alert is automatically ON during WX SCAN

mode.

EXTERNAL SPEAKER/MICROPHONE JACK

Your radio can be used with an optional external

speaker/microphone or headset, freeing your hands

for other tasks. To use an optional speaker/

microphone or headset:

lInsert the plug(s) into the SPK/MIC jacks.

lPlace the earbud into your ear, and adjust the

mic into your desired position.

Note : You can charge a rechargeable NiMH

battery pack thru the CHG Jack with

the LXADP Adaptor (sold seperatly).

PROBLEM SOLUTION

No Power - Check battery installation and/or replace batteries.

Cannot Receive

Messages

- Confirm the radios have the same channel

settings.

- Make sure that you are within range of the other

transceivers.

- Buildings and other structures may interfere with

your communication.

Radio is not responding

to button presses

- Make sure key lock is not on (See Keypad Lock).

- Radio might need to be reset. Turn radio off then

on.

Display is dim - Recharge or replace batteries.

Charger not functioning - Contacts on the bottom of the radio may require

cleaning.

- Ensure the outlet where the charger is plugged

in is functioning properly.

- Check that the battery pack is installed in the radio

properly.

USE AND CARE

1. Use a soft damp cloth to clean the radio.

2. Do not use alcohol or cleaning solutions to clean the radio.

3. Do not immerse the radio in water.

4. Dry the radio with a dry lint-free cloth should it get wet.

5. Turn off the radio and remove the batteries during long-term

storage.

If you have a problem which you believe requires

service, please call first and speak with a service

technician at 816-241-8500. Many problems can be

remedied over the phone without returning the unit for

service.

TROUBLESHOOTING GUIDE SPECIFICATIONS

Channels 36 FRS Channels +121 Privacy Codes

10 NOAA Weather (WX) Band Channels

Operating Frequency UHF 462.5500 ~ 467.7125 MHz

Power Source 3 AAA Alkaline or 3.6V Rechargeable NiMH

battery pack

FRS FREQUENCY CHART (MHz)

CH. No CH. Freq. CH. No CH. Freq. CH. No CH. Freq.

1462.5625

2462.5875

3462.6125

11 467.6375

4462.6375

12 467.6625

5462.6625

13 467.6875

21 462.7000

6462.6875

14 467.7125

22 462.7250

7462.7125

15 462.5500

8467.5625

16 462.5750

9467.5875

10 467.6125

17 462.6000

18 462.6250

19 462.6500

20 462.6750

NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz)

CH. No CH. Freq. CH. No CH. Freq.

1 162.550 6 162.500

2 162.400 7 162.525

3 162.475 8 161.650

4 162.425 9 161.775

5 162.450 10 163.275

PRIVACY CODES FREQUENCY CHART (Hz)

Code Freq. Code Freq. Code Freq. Code Freq. Code Freq.

1 67.0 9 91.5 17 118.8 25 156.7 33 210.7

2 71.9 10 94.8 18 123.0 26 162.2 34 218.1

3 74.4 11 97.4 19 127.3 27 167.9 35 225.7

4 77.0 12 100.0 20 131.8 28 173.8 36 233.6

5 79.7 13 103.5 21 136.5 29 179.9 37 241.8

6 82.5 14 107.2 22 141.3 30 186.2 38 250.3

7 85.4 15 110.9 23 146.2 31 192.8

8 88.5 16 114.8 24 151.4 32 203.5

* Channel 8,9 and 10 are designated Canadian Marine Frequencies

* Channels 8~14 are low-power FRS channels

Note: Privacy codes can be programmed for use on Channels 1~22 only

DCS PRIVACY CODE CHART

No.

CODE No. CODE No. CODE

1 023 29 174 57 445

2 025 30 205 58 464

3 026 31 223 59 465

4 031 32 226 60 466

5 032 33 243 61 503

6 043 34 244 62 506

7 047 35 245 63 516

8 051 36 251 64 532

9 054 37 261 65 546

10 065 38 263 66 565

11 071 39 265 67 606

12 072 40 271 68 612

13 073 41 306 69 624

14 074 42 311 70 627

15 114 43 315 71 631

16 115 44 331 72 632

17 116 45 343 73 654

18 125 46 346 74 662

19 131 47 351 75 664

20 132 48 364 76 703

21 134 49 365 77 712

22 143 50 371 78 723

23 152 51 411 79 731

24 155 52 412 80 732

25 156 53 413 81 734

26 162 54 423 82 743

27 165 55 431 83 754

28 172 56 432 - -

Note: Privacy codes can be programmed for use on Channels 1~22 only

LIMITED WARRANTY (United States and Canada)

Subject to the exclusions set forth below, Midland Radio Corporation will repair

or replace, at its option without charge, any Midland FRS transceiver which fails

due to a defect in material or workmanship within Three Years following the

initial consumer purchase.

This warranty does not apply to water damage, battery leak, abuse or misuse of

unauthorized accessories, unauthorized service or modification or altered

products. Accessories have a 90 day warranty from date of purchase, including

any chargers, microphones, and cables.

This warranty does not include the cost of labor for removal or re-installation of

the product in a vehicle or other mounting.

ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED AS SET FORTH HEREIN AND

TO THE DURATION OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR

OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED

WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS

PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

IN NO EVENT SHALL MIDLAND BE LIABLE, WHETHER IN CONTRACT OR

TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS

NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE AND DEATH) FOR

DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR

ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR

PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA OR

OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE

ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE

FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.

For Product Purchased in the USA:

Performance of any obligation under this warranty may be obtained by returning

the warranted product, prepaid freight, along with proof of purchase to:

Midland Radio Corporation

Warranty Service Department

5900 Parretta Drive

Kansas City, MO 64120

This warranty gives you specific legal rights, and you may also have other rights,

which vary from state to state.

Note: The above warranty applies only to merchandise purchased in the United

States of America or any of the territories or possessions thereof, or from a U.S.

Military exchange.

For Product Purchased in Canada:

Performance of any obligation under this warranty may be obtained by returning

the warranted product, along with proof of purchase, to your place of purchase in

Canada.

This warranty gives you specified legal rights. Additional warranty rights may be

provided by law in some within Canada.

IMPORTANT: This device complies with Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired

operation of the device.

IMPORTANT: Le présent appareil est conforme aux CNR d'Industrie

Canada applicables aux appareils radio exempts de licence. L'exploitation

est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi même si le brouillage est susceptible d'en

compromettre le fonctionnement.

FVIN information: . To verify the FVIN, press and hold the “DOWN”8d

key while turning the Volume Switch to power on the radio. You will

see the FVIN in the display for 2 sec.

AVPH2

AVPH2AVPH2

- Closed Face

Helmet

Headset Kit

AVP1

AVP1AVP1

- Over the Ear

Headsets

ACCESSORIES

Accessories can be purchased at midlandusa.com.

AVPH3

AVPH3AVPH3

- Surveillance

Headsets

AVPH5

AVPH5AVPH5

- Behind the

Head Headsets

AVPH4

AVPH4 AVPH4

- Wrap Around

the Ear

Headsets

AVPH7

AVPH7AVPH7

- Camo

Headsets with

Boom Mic

AVP-H8

AVP-H8AVP-H8

- Acoustic Throat

Mic

Produktspezifikationen

Marke:	Midland
Kategorie:	Radio
Modell:	LXT600BB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Midland LXT600BB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Radio Midland

Midland G10 Pro Bedienungsanleitung

30 September 2024

Midland X-Talker T51X3VP3 Bedienungsanleitung

22 September 2024

Midland GXT5000 Bedienungsanleitung

15 September 2024

Midland BR180 Bedienungsanleitung

4 September 2024

Midland GXT67 PRO Bedienungsanleitung

3 September 2024

Midland M Zero Plus Bedienungsanleitung

3 September 2024

Midland WR120B Bedienungsanleitung

2 September 2024

Midland MicroMobile MXAT01VP Bedienungsanleitung

25 August 2024

Midland MicroMobile MXAT05 Bedienungsanleitung

25 August 2024

Midland MicroMobile MXAT05VP Bedienungsanleitung

25 August 2024

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-

Ruarkaudio Rseven Bedienungsanleitung

16 Oktober 2024

Ruarkaudio MR1 Bedienungsanleitung

16 Oktober 2024

Denver TWE-55B Bedienungsanleitung

15 Oktober 2024

AudioSonic CL-1486 Bedienungsanleitung

14 Oktober 2024

Sangean DPR-39 Bedienungsanleitung

14 Oktober 2024

Sangean RCR-9 Bedienungsanleitung

14 Oktober 2024

PerfectPro Dabbox Bedienungsanleitung

13 Oktober 2024

Uniden UH45CP Bedienungsanleitung

12 Oktober 2024

Sencor SIR 5000WDB Bedienungsanleitung

11 Oktober 2024

AEG KRC 4350 BT Bedienungsanleitung

10 Oktober 2024