Metra 99-8266 Bedienungsanleitung

Metra Auto Kit 99-8266

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-8266 (4 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 8/3/18 INST99-8266BLHG
I N S TA L L AT I O N I N S T R U C T I O N S
99-8266BLHG
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Tinted metallic finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: TBA
Antenna Adapter: 40-LX11
A B C
Toyota Camry 2018-up*
*Visit for up-to-date vehicle specific applications.MetraOnline.com
D
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY KIT PREPARATION
Please visit Metraonline.com for
Dash Disassembly illustrations.
Please visit Metraonline.com for
Kit Preparation illustrations.
1. Unclip and remove the dashboard trim
panel below the climate controls.
2. For models with a push button start:
Unclip the Start/Stop button trim panel
and set it to the side.
For models without a push button start:
Unclip and remove the trim panel to the
left of the radio/climate control panel.
3. Unclip and remove the lower dashboard
trim panel directly above the glovebox.
4. Unclip and remove the upper dashboard
trim panel with a/c vent.
5. Unclip the climate control panel and set
it to the side.
6. Remove (4) 10mm screws securing the
radio panel, then unplug and remove
the panel.
Continue to Kit Preparation
1. Unclip and remove the passenger airbag
light assembly from the factory radio
panel, then attach the assembly to the
radio trim panel
.
2. Remove the panel clips from the factory
radio panel, then attach them onto the
radio trim panel
.
Continue to Kit Assembly
REV. 8/3/2018 INST99-8266BLHG 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
pocket
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, then secure it using the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
5. Connect the passenger airbag assembly,
then secure the completed assembly to
the dash using the factory screws.
6. Reassemble the dash in reverse
order of disassembly to complete the
installation.
(Figure B)
(Figure A)
(Figure A)
ISO DDIN radio provision
1. Attach the
radio brackets
to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Connect the passenger airbag assembly,
then secure the completed assembly to
the dash using the factory screws.
4. Reassemble the dash in reverse
order of disassembly to complete the
installation.


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 99-8266

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-8266 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Auto Kit Metra

Bedienungsanleitung Auto Kit

Neueste Bedienungsanleitung für -Kategorien-