Metra 99-8164G Bedienungsanleitung

Metra Auto Kit 99-8164G

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-8164G (12 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 7/16/20 INST99-8164
I N S TA L L AT I O N I N S T R U C T I O N S
99-8164
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
ISO DDIN radio provision
ISO DIN radio provision with pocket
Custom texture and painted tan or gray to match the factory appearance
Touchscreen for retention of climate control functions
Factory amplifier not retained with this product - an amplifier bypass
harness is included
99-8164T — Tan w/black trim, 99-8164G — Gray w/black trim
KIT FEATURES
KIT COMPONENTS
A) Radio trim panel • B) Radio brackets • C) Pocket • D) Panel clips (3) • E) #8 x 3/8” Pan-head Philips screws (8)
• F) Wiring and interfacing (not shown) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................4
Axxess Interface Installation .............................5-11
Final Assembly .......................................................9
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Included with kit
Antenna Adapter:
Not needed
Lexus RX300 1999-2003
A B C D
E
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove the shifter trim.
(Figure A)
2. Remove (4) 10mm bolts and remove the
radio assembly. (Figure B)
3. Depress side tabs to remove the factory
hazard button and passenger airbag
light from the factory radio assembly.
(Figure C)
4. Depress all four side tabs to remove
the factory vents from the factory radio
assembly. (Figure D)
Continue to Kit Preparation
(Figure B) (Figure D)
(Figure A) (Figure C)
REV. 7/16/2020 INST99-8164 3
KIT PREPARATION
1. Attach the (3) supplied to the panel clips
radio trim panel. (Figure A)
2. Snap the passenger airbag light and
hazard button into the radio trim panel
from the back. (Figure B)
3. Attach the factory vents to the radio
trim panel (Figure C)
Continue to Kit Assembly
(Figure A)
(Figure B) (Figure C)


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 99-8164G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-8164G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Auto Kit Metra

Bedienungsanleitung Auto Kit

Neueste Bedienungsanleitung für -Kategorien-