Metra 99-7806B Bedienungsanleitung

Metra Auto Kit 99-7806B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7806B (8 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 11/17/2015 INST99-7806B
INSTALLATION INSTRUCTIONS FOR PART 99-7806B
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
Painted matte black
A) Radio housing 1996-1998 • B) Radio housing 1999-2003 • C) Brackets • D) (4) (8) #8 x 3/8” Truss head Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761- Acura/Honda 1986-2003
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
• Socket wrench
TOOLS REQUIRED
(without factory navigation)
A B C D
Dash Disassembly
Acura RL 1996-1998 (without factory NAV) .............. 2
Acura RL 1999-2003 (without factory NAV) .............. 3
Kit Assembly
Acura RL 1996-1998 (without factory NAV) ...........4-5
Acura RL 1999-2003 (without factory NAV) ...........6-7
Table of Contents
Acura RL 1996-1998
without factory NAV
1. Remove the carpet panels to the left
and right of the console and remove
one screw per side.
(Figures A and B)
2. Remove the select lever cover by
pulling gently on both ends. The
cover is mounted on four clips.
(Figure C)
3. Remove the shifter trim panel along
with the “not a lighter” pocket
attached. (Figure D)
Dash Disassembly
99-7806B
4. Remove two screws at the bottom of
the radio/climate panel. (Figure E)
5. Remove the air vents from the top of
the radio panel. (Figure F)
6. Remove two screws at the top that
hold A/C and radio panel in place.
(Figure G)
7. Remove the radio/climate panel.
(Figure G)
8. Remove the three buttons from the
factory radio panel and snap them
into the Metra radio housing.
Continue to kit assembly
(Figure B)
(Figure F)
(Figure C)
(Figure G)(Figure D)
(Figure A)
(Figure E)
99-7806B
Dash Disassembly
Acura RL 1999-2003
without factory NAV
1. Remove the carpet panels to the
left and right of the console and
remove one screw per side.
(Figure A, B)
2. Remove the select lever cover by
pulling gently on both ends. The
cover is mounted on four clips.
(Figure C)
3. Remove the shifter trim panel
along with the “not a lighter”
pocket attached. (Figure D)
(Figure F)
(Figure A)
(Figure B)
(Figure C)
(Figure D)
(Figure E)
4. Remove two screws at the bottom
of the radio/climate panel.
(Figure E)
5. Remove factory radio from the
factory radio panel. (Figure F)
Continue to kit assembly


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 99-7806B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7806B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Auto Kit Metra

Bedienungsanleitung Auto Kit

Neueste Bedienungsanleitung für -Kategorien-