Metra 99-7338 Bedienungsanleitung

Metra Auto Kit 99-7338

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Metra 99-7338 (16 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 9/22/2015 INST99-7338
Installation instructions for part 99-7338
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted to match factory dash:
99-7338B = Matte Black
99-7338HG = High Gloss Black
99-7338S = Silver
• A) Radio housing • B) ISO brackets • C) ISO trim plate • D) Pocket • E) ISO DDIN brackets
• F) ISO DDIN trim plate • G) Hazard switch bracket • H) (4) 1/2” Phillips pan head screws
• I) (6) Plastic panel clips • J) (3) Small metal panel clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-7303
Antenna Adapter:
• 40-KI11
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
(with manual climate)
A B C D E F
G H I J
99-7338
Dash Disassembly .......................................................... 2
Kit Preparation ............................................................... 3
Kit Assembly
- DIN radio provision 3 ........................................................
- ISO DIN radio provision.................................................. 4
- ISO DDIN radio provision 4 ...............................................
Table of Contents Dash Disassembly
1. Unclip and remove the A/C vents.
(Figure A)
2. Remove (4) Phillips screws securing the radio
trim panel assembly. (Figure B)
3. Unclip and remove radio and climate
control panel.
4. Remove (4) Phillips screws securing the
climate control, and (4) Phillips screws
securing the hazard switch assembly to the
radio trim panel.
5. Unclip and remove the hazard button from the
factory switch assembly.
Continue to kit preparation
(Figure B)
(Figure A)
99-7338
1. Snap the hazard button into the hazard switch bracket.
2 Attach the hazard switch assembly to the radio housing with the supplied
(4) 1/2” inch Phillips screws.
3. Attach the climate control to the radio housing using the factory hardware.
4. Attach the (9) panel clips in the same position as the factory radio trim
panel. (Figure A)
Note: If clips are not provided then please remove the factory clips and
re-use them.
Continue to kit assembly
Kit Preparation
(Figure A)
METALMETAL
Metal clips
Plastic
clips


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 99-7338

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7338 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Auto Kit Metra

Bedienungsanleitung Auto Kit

Neueste Bedienungsanleitung fĂĽr -Kategorien-