Metra 95-7361S Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-7361S (8 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 11/25/2014 INST95-7361S
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation Instructions for 95-7361S
• ISO DDIN radio provision
• Painted silver
• A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7303
Antenna Adapter: • 40-KI11
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
(with factory NAV)
A B C
Dash Disassembly
– Hyundai Santa Fe 2010-2012(w/factory NAV) ....... 2
Kit Assembly
– ISO DDIN radio provision ...................................... 3
Table of Contents
95-7361S
Dash Disassembly
1. Remove (1) Phillips screw from the
right side of the panel below the
steering column then unclip and let
right side of panel hang. (Figure A)
2. Unclip and remove the cover
above the clock on top of panel
surrounding the radio. (Figure B)
3. Unclip and remove the panel
extending across the dash below
the a/c control and above the
glove box including the ash tray.
(Figure C)
4. Remove (2) Phillips screws then
unclip and remove the panel
surrounding the radio including the
A/C vents. (Figure D)
5. Remove (4) Phillips screws
securing the radio. Unplug and
remove radio.
6. Remove the (3) switches from the
factory radio and snap them into
the Metra radio housing.
Continue to kit assembly (Figure C) (Figure D)
(Figure A) (Figure B)
95-7361S
Kit Assembly
ISO DDIN radio provision
1. Connect the radio brackets to
the radio housing with (4)
#8 x 3/8” Phillips screws supplied.
(Figure A)
2. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
(Figure A) (Figure B)
Produktspezifikationen
| Marke: | Metra |
| Kategorie: | Auto Kit |
| Modell: | 95-7361S |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Metra 95-7361S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Auto Kit Metra
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
Bedienungsanleitung Auto Kit
- Auto Kit Belkin
- Auto Kit Hama
- Auto Kit Kensington
- Auto Kit Manhattan
- Auto Kit Manta
- Auto Kit SilverCrest
- Auto Kit Trust
- Auto Kit Thule
- Auto Kit Maginon
- Auto Kit Blaupunkt
- Auto Kit Kenwood
- Auto Kit Einhell
- Auto Kit Caliber
- Auto Kit Lenco
- Auto Kit Pioneer
- Auto Kit Jabra
- Auto Kit Motorola
- Auto Kit Nokia
- Auto Kit Livoo
- Auto Kit Garmin
- Auto Kit Novero
- Auto Kit Plantronics
- Auto Kit Sony Ericsson
- Auto Kit Scosche
- Auto Kit SuperTooth
- Auto Kit Parrot
- Auto Kit EnVivo
- Auto Kit Alpine
- Auto Kit Urban Revolt
- Auto Kit Uniden
- Auto Kit Magellan
- Auto Kit TomTom
- Auto Kit AHG
- Auto Kit BURY
- Auto Kit HTC
- Auto Kit Mr Handsfree
- Auto Kit Boss
- Auto Kit Jensen
- Auto Kit Interphone-Cellularline
- Auto Kit Veho
- Auto Kit WAGAN
- Auto Kit NAV-TV
- Auto Kit PAC
- Auto Kit Havis
Neueste Bedienungsanleitung für -Kategorien-
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
23 August 2024
22 August 2024
22 August 2024
22 August 2024