Metra 95-6523 Bedienungsanleitung

Metra Auto Kit 95-6523

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-6523 (8 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 9/18/2014 INST95-6523
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-6523
• Double DIN radio provision
•
Custom texture
• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) (4) White plastic panel clips
• E) (8) 5mm x 12mm Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1784 or XSVI-6523-NAV
Antenna Adapter: • 40-VW10 or 40-EU10
• Panel removal tool • Phillips screwdriver
• 86-5618 radio removal tool
• 86-3528 radio removal tool
TOOLS REQUIRED
D E
Dash Disassembly
– Ram Promaster 2014-up ...................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
Table of Contents
A B C
95-6523
Dash Disassembly
With radio delete or Single DIN
factory radio:
1. Using Metra’s 86-5618 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws in
bottom of dash opening.
3. Unclip and remove the factory
radio trim panel.
With Double Din factory radio:
1. Using Metra’s 86-3528 radio
removal tools pull the factory radio
from the dash.
2. Remove (2) Phillips screws from
the bottom of the dash opening.
(Figure A)
95-6523
Kit Assembly
Double DIN radio provision
1. Attach the (4) panels clips to the
radio trim panel. (Figure A)
2. Break the small locating pin
from inside surface of each
radio bracket. (Figure B)
3. Position the radio mounting
brackets into the sub dash opening
and secure with the (2) Phillips
screws removed in disassembly.
(Figure C)
4. Attach the radio brackets to
the aftermarket radio using the
screws supplied with the radio or
the supplied (8) Phillips screws.
Note: Screws must not protrude
from slot in radio brackets as
interference with mounting
bracket will occur when sliding
radio into mounting brackets.
(Figure D)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
6. Slide the aftermarket radio into the
radio opening between the radio
mounting brackets until it clips into
the opening. (Figure E)
7. Snap the radio trim panel into
the opening around the
aftermarket radio.
(Figure C)
(Figure A)
(Figure B)
(Figure E)
(Figure D)
Remove pin


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 95-6523

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-6523 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Auto Kit Metra

Bedienungsanleitung Auto Kit

Neueste Bedienungsanleitung für -Kategorien-