Metra 95-5703B Bedienungsanleitung

Metra Car Kit 95-5703B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-5703B (4 Seiten) in der Kategorie Car Kit. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 1/23/19 INST95-5703B
I N S TA L L AT I O N I N S T R U C T I O N S
95-5703B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Vent housing • D) (4) 1/2” screws • E) (4) Panel clips TOOLS REQUIRED
• 1/8” drill bit• Cutting tool
• Ford radio removal tools* • Phillips screwdriver
• T-20 Torx screwdriver
* Metra part number 86-5618
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
Wiring Harness: 70-1770 • 70-5510*
(sold separately)
Antenna Adapter: Not required
*Amplied models
A B C D E
Ford Mustang 1994-2000
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specic applications
1.800.221.0932
|
MetraOnline.com
2
1. Unclip, unplug, and remove the trim
panel surrounding the shifter. (Figure A)
2. Using Metra’s 86-5618 radio removal
tools (sold separately), release the radio
from the dash. Slide the radio out, then
unplug and remove the radio. If the
vehicle is equipped with a CD player
below, remove in the same manner.
(Figure B)
3. Remove (2) screws securing the radio/
climate control trim panel, then unclip
and remove the panel. Unclip and
remove the a/c vents for re-use in
Kit Preparation. (Figure C)
Note: The (2) screws will not be reused.
Continue to Kit Preparation
(Figure B)(Figure A) (Figure C)
DASH DISASSEMBLY
REV. 1/23/2019 INST95-5703B 3
To the 95-5703B radio trim panel:
1. Attach the factory a/c vents removed in
Dash Disassembly to the vent housing.
(Figure A)
2. Attach the vent housing. (Figure B)
3. Attach the (4) provided. panel clips
(Figure B)
Attention! The factory trim panel will not be
able to be reinstalled once the following
step is performed.
4. Cut the sub-dash to allow room for the
radio assembly. (Figure C)
Continue to Kit Assembly
KIT PREPARATION KIT ASSEMBLY
(Figure B)
(Figure A)
1. Secure the radio brackets to the radio using
the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra. Test the radio
for proper operation.
3. Remove (2) T-20 Torx screws securing the
bottom of the climate control panel. Slide
the radio assembly into the dash, then
secure it using the climate control screws,
and also the (4) 1/2” screws provided. It
would be best if the 1/2” screw holes were
pre-drilled with a 1/8” drill bit to avoid the
plastic from cracking. (Figure B)
4. Attach the assembly to the radio trim panel
dash and radio brackets.
5. Clip the shifter trim panel back to the
vehicle to complete the installation.
(Figure A)
(Figure B)
(Figure C)
Remove shaded areas

Produktspezifikationen

Marke: Metra
Kategorie: Car Kit
Modell: 95-5703B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-5703B benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Car Kit Metra

Bedienungsanleitung Car Kit

Neueste Bedienungsanleitung fĂźr -Kategorien-