McIntosh WS300 Bedienungsanleitung

McIntosh Lautsprecher WS300

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für McIntosh WS300 (6 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
WS300
In-Wall Loudspeaker System
Installation Guide
2
WARNING - TO REDUCE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
PERSONNEL.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
General:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Warning: To reduce risk of fire or electrical shock, do not
expose this equipment to rain or moisture. This unit is
capable of producing high sound pressure levels. Continued
exposure to high sound pressure levels can cause permanent
hearing impairment or loss. User caution is advised and ear
protection is recommended when playing at high volumes.
6. Only use attachments/accessories specified by the
manufacturer.
Installation:
7. Install in accordance with the manufacturer’s instructions.
8.When mounting the Ceiling Loudspeaker System to a
building structure it is important to follow all of the local
building/construction codes. Make sure the ceiling structural
members can support a total weight of five times the weight
of the Ceiling Loudspeaker System.
9. Do not install near any heat sources such as radiators, heat
registers, stoves, or other equipment (including amplifiers)
that produce heat.
10. Do not use this equipment near water.
11. Do not expose this equipment to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
Care of Equipment:
12. Clean only with a dry cloth.
13. Do not permit objects or liquids of any kind to be pushed,
spilled and/or fall into the equipment through enclosure
openings.
Repair of Equipment:
14. Refer all servicing to qualified service personnel. Servicing
is required when the equipment has been damaged in any
way, liquid has been spilled or objects have fallen into
the equipment, the equipment has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Do not attempt to service beyond that described in the
operating instructions. All other service should be referred
to qualified service personnel.
16. When replacement parts are required, be sure the service
technician has used replacement parts specified by
McIntosh or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
17. Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Please read these Safety Instrucons as well
as the Important Additional Operation
Information Guide that is enclosed.
Thank you from all of us at McIntosh
You have invested in a precision instrument that will
provide you with many years of enjoyment. Please take a
few moments to familiarize yourself with the features and
instructions to get the maximum performance from your
equipment.
If you need further technical assistance, please contact
your McIntosh Dealer who may be more familiar with
your particular setup including other brands. You can also
contact us at McIntosh with additional questions or in the
unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance Phone: (607) 723-3512
Customer Service (for repairs)
Phone: (607) 723-3515
Fax: 607-724-1917
support@mcintoshlabs.com
Website: mcintoshlabs.com
Make a Note
For future reference, you can write your serial number and
purchase information here. We can identify your purchase
from this information if the occasion should arise.
Serial Number:
Purchase Date:
Dealer Name:
Important Safety Instrucons
3
Table of Contents
Important Safety Instructions ��������������������������������������� 2
Thank you from all of us at McIntosh ��������������������������� 2
Make a Note ������������������������������������������������������������������ 2
Tools Needed ����������������������������������������������������������������� 3
Parts Included ��������������������������������������������������������������� 3
Ready To Perform ��������������������������������������������������������� 3
Making a Hole ��������������������������������������������������������������� 3
Installing the Frame ������������������������������������������������������ 3
Connecting to Speaker Wire ���������������������������������������� 3
Putting it in the Wall ���������������������������������������������������� 4
Warranty ����������������������������������������������������������������������� 5
Specifications ���������������������������������������������������������������� 6
Drivers ��������������������������������������������������������������������������� 6
Tools Needed
• Phillips Screwdriver
• Drywall Knife or Saw
• Pencil
• Tape Measure
• Stud nder
• Bubble Level
Parts Included
• Loudspeaker Bafe and Enclosure
• Frame
• Frame Gaskets (2)
• Grille
• Cutout Template
• Clamping Pieces (2 already installed on frame)
• Frame Screws #10-24 x 3 inch (6 already installed)
• Bafe Washers #8 (4)
• Bafe Screws #10-24 x 1-1/2 inch (4)
Ready To Perform
The WS300 In-Wall Loudspeaker System is designed to
provide exceptional performance. This 3-way speaker
features McIntosh’s acclaimed MTM speaker array and
shallow woofer design contained in a fully enclosed
back chamber. The design allows for expansive sound
performance with a shallow footprint perfect for in-wall
mounting.
The Low Prole Micro-Flange Grill is magnetically held in
place. These grills are ready to be painted if you wish.
Making a Hole
For new construction, the RK300 rough-in bracket
is recommended. The RK300 is available from your
McIntosh Dealer. If you have installed the RK300 skip
ahead to “Installing the Frame”.
Choose the proper position for the WS300 keeping in
mind acoustical properties, the positions of studs and
ability to run speaker wire to the WS300. When the
proper location is found:
Hold the supplied cutout template against the wall and
align it using a bubble level and tape the template to the
wall.
Trace the opening.
For dry wall installation, use a drywall knife or saw to
cut a hole. The hole should be 13 1/4 inches (33.655cm)
wide by 13 1/4 inches (33.655cm) in height.
Installing the Frame
The Frame Assembly has two Clamping Pieces
connected to the Frame by Six 3-inch screws (3 each).
The bolt at the end of each screw is there to make sure it
stays connected and need not be moved.
Install the “L” shaped self-adhesive Frame Gaskets to the
rear of the Frame so that the Gaskets will sit between the
Frame and the wall when installed.
With the Clamping Pieces loose, manipulate the frame
into the opening in the wall. The Clamping Pieces can be
moved to allow the frame to t. Once in place, position
the Clamping Pieces against the back of the wallboard on
each side.
When satised that the Frame is level (using a bubble
level), tighten all six screws until the Frame is securely
attached to the wall.
Connecng to Speaker Wire
Prepare Speaker Wires for connection to the WS300.
Remove ½ inch (12.7 mm) of insulation from the wire
end and twist the strands together. For runs under 25
feet use at least 16AWG wire. For runs under 50 feet use
at least 14AWG, and for longer runs up to 100 feet use
12AWG. 12AWG, being the larger wire, can be used in
all the above cases if desired.
1. Pull enough speaker wire through the opening in the
Frame to connect to the WS300.
2. The two Loudspeaker Binding Posts are located
at the base of the Bafe Enclosure. Loosen the

Produktspezifikationen

Marke: McIntosh
Kategorie: Lautsprecher
Modell: WS300

Brauchst du Hilfe?

Wenn Sie Hilfe mit McIntosh WS300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher McIntosh

McIntosh

McIntosh XRT1.1K Bedienungsanleitung

17 September 2024
McIntosh

McIntosh ML1 Bedienungsanleitung

24 August 2024
McIntosh

McIntosh LCR80 Bedienungsanleitung

1 August 2024
McIntosh

McIntosh XRT2K Bedienungsanleitung

25 Juli 2024
McIntosh

McIntosh XR100 Bedienungsanleitung

20 Juli 2024
McIntosh

McIntosh RS100 Bedienungsanleitung

20 Juli 2024
McIntosh

McIntosh RS250 Bedienungsanleitung

15 Juli 2024
McIntosh

McIntosh XR200 Bedienungsanleitung

13 Juli 2024
McIntosh

McIntosh XLS320 Bedienungsanleitung

13 Juli 2024
McIntosh

McIntosh XRT2.1K Bedienungsanleitung

13 Juni 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024