McIntosh MC205 Bedienungsanleitung

McIntosh EmpfÀnger MC205

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr McIntosh MC205 (4 Seiten) in der Kategorie EmpfĂ€nger. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
www.mcintoshlabs.com
McIntosh Part No. 04170900 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
Important Additional Operation Information Guide
ATTENTION:
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
Safety
Instructions
Disposal
Instructions
Lithium
Batteries
CR
+
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s instruc-
tions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not t into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specied by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer,
or sold with the apparatus. When a
cart is used, use caution when mov-
ing the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualied service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as pow-
er-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15. Do not expose this apparatus to dripping or
splashing and that no objects lled with liq-
uids, such as vases, should not be placed on the
equipment.
Ne pas exposer cet appareil Ă  des Ă©claboussures
ou gouttelettes d’un liquide. Aucun objet rem-
plie de liquide comme par exemple un vase ne
doit ĂȘtre placĂ© sur l’appareil.
16. If this equipment is supplied with a power
supply cord only, the mains plug of the power
supply cord shall remain readily operable. To
completely disconnect this apparatus from the
a.c. mains disconnect the plug from the a.c.
receptacle.
Si l’équipement est uniquement alimentĂ© par
un cordon d’alimentation, la che du cordon
d’alimentation doit demeurer aisĂ©ment acces-
sible. Pour dĂ©connecter complĂštement l’équi-
pement du rĂ©seau d’alimentation, dĂ©connecter
la che du cordon d’alimentation de la prise
murale.
17. If this equipment is supplied with AC /DC
Adapter with separate power supply cord or the
AC/DC Adapter plugging directly into an a.c.
receptacle, they shall remain readily operable.
To completely disconnect this equipment from
the a.c. mains remove the AC /DC Adapter
mains power supply cord from the a.c. recep-
tacle or remove the AC /DC Adapter when it is
directly plugged into the a.c. receptacle.
Si l’équipement est alimentĂ© par un adaptateur
AC/DC munis d’un cordon d’alimentation ou
un adaptateur AC/DC qui est alimenté directe-
ment Ă  la prise murale, ils doivent demeurer
aisément accessibles. Pour déconnecter com-
plĂštement l’équipement du rĂ©seau d’alimen-
tation, dĂ©connecter l’adaptateur AC/DC de la
prise murale ou dĂ©connecter le cordon d’ali-
mentation de l’adaptateur AC/DC de la prise
murale.
18. WARNING: Do not expose batteries or battery
pack to excessive heat such as sunshine, re or
the like.
AVERTISSEMENT: Les batteries ou bloc de
batteries ne doivent pas etre exposees a une
chaleur excessive telle que celle du soleil, feu
ou autre source de chaleur similaire.
19. CAUTION: danger of explosion if battery is in-
correctly replaced. Replace only with the same
or equivalent type.
ATTENTION: danger d’explosion si la pile
n’est pas remplacĂ©e correctement. Ne remplac-
er que par le mĂȘme type ou un type Ă©quivalent.
20. Connect mains power supply cord only to a
mains socket outlet with a protective earthing
connection.
21. Warning: The Ethernet connector of this
equipment must not be directly connected to
a public network. Connection is to be made
only by way of a modem or router approved
for this purpose.
The lightning ash with arrowhead, within an equilateral trian-
gle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be
of sufcient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intend-
ed to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompa-
nying the appliance.
ATTENTION:
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
WARNING: TO REDUCE RISK OF
FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS INSIDE. RE-
FER SERVICING TO QUALIFIED PERSONNEL.
TO PREVENT THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SER-
VICEABLE PARTS INSIDE.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
a) User Information acc. to FCC15.21 as following:
Changes or modications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
b) Statement for Class B digital device acc. to FCC
15.105 as following:
NOTE: is equipment has been tested and found
to comply with the limits for a Class A/B
digital device, pursuant to part 15 of the
FCC Rules. ese limits are designed to
provide reasonable protection against harm-
ful interference in a residential installation.
is equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
o and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving
antenna.
—Increase the separation between the
equipment and receiver.
—Connect the equipment into an outlet
on a circuit dierent from that to which
the receiver is connected.
—Consult the dealer or an experienced
radio/ TV technician for help.
—is device complies with Industry
Canada licence-exempt RSS stan-
dard(s). Operation is subject to the fol-
lowing two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux
CNR d’Industrie Canada applicables
aux appareils radio exempts de licence.
L’exploitation est autorisĂ©e aux deux
conditions suivantes : (1) l’appareil ne
doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi,
mĂȘme si le brouillage est susceptible
d’en compromettre le fonctionnement.
c) e device must be kept more than 20 cm from all
persons.
FCC INFORMATION (For US and Canada Customers
Additional Safety Information specic to this product may be
contained in the Owner’s Manual supplied with this product
Outdoor Antenna Grounding
If an outside antenna or cable system is connected
to the product, be sure the antenna or cable system
is grounded so as to provide some protection against
voltage surges and built-up static charge. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides
information with reguards to proper grounding of the
mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, and size of ground
conductors, location of antenna-discharge unit, con-
nection to ground electrodes and requirements for the
grounding electrode.
Example of antenna grounding as
per National Electrical Code,
ANSI/NFPA 70
2
Disposal Instructions
Waste and Disposal Instructions
3
It is advisable to remove the Lithium Battery from this
product and/or remote control when it is not used for an
extended period of time. This will help to extend battery
life and avoid possible damage to the product and/or
remote control.
BATTERY REMOVAL:
Perform the following steps to remove the battery from
the product and/or remote control:
1. Before removing the Lithium Battery, rst discon-
nect the AC Power Cord and/or AC/DC Adapter
from this product.
Note: Step 1 is not required when removing the Lithium
Battery from a remote control.
2. Press the tab and lift up on the Backup Battery Cov-
er and temporarily place it aside. Refer to gures 1
and 2.
3. When removing the battery from a remote control
proceed to step 4. To remove the battery from a
product proceed to step 5.
4. Refering to figure 3, press on the bottom edge of
the battery to release the battery from the molded
battery socket. Then remove the battery from inside
of the Remote Control. Proceed to step 6.
5. Refering to gure 4, use a small pocket size screw
driver (or other suitable tool) and carefully insert the
tip of the tool between the metal tab of the battery
socket and the left side of the battery. Then rotate the
tool to release the battery from the socket. Remove
the battery from inside of the product.
6. Reinstall the Battery Cover.
7. Store the battery in a cool dry place for future use or
dispose of the battery in accordance with the local
regulations for lithium battery disposal. Batteries
should never be thrown away or incinerated.
BATTERY INSTALLATION:
Perform the following steps to install the battery into the
product and/or remote control:
8. Before installing the Lithium Battery, rst discon-
nect the AC Power Cord and/or AC/DC Adapter
from this product.
Note: Step 8 is not required when installing the Lithium
Battery into a remote control.
CAUTION:
Danger of explosion if the battery is
incorrectly installed. Only install one of
the approved Lithium Batteries listed
below.
Long Life Lithium Coin Cell type battery is used in this
product and/or supplied remote control. is product
and/or supplied remote control may be supplied with a
battery depending on the country where this product
is purchased. When purchasing a battery for use in this
product and/or remote control, refer to the following list:
This product and/or the remote control supplied with
this product may contain a coin/button cell battery.
If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can
lead to death. Keep new and used batteries away from
children. If the battery compartment does not close
securely, stop using the product and/or remote control
and keep it away from children. If you think batteries
might have been swallowed or placed inside of the
body, seek immediate medical attention.
WARNING:
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
AVERTISSEMENT:
NE PAS INGÉRER L’ACCUMULATEUR,
RISQUE DE BRỊLURE CHIMIQUE
[La telecommande fournie avec] Ce product con-
tient un accumulateur bouton. En cas d’ ingestion,
l’ accumulateur bouton, peut causer des brulures
internes severes en a peine 2 heures qui peuvent etre
mortelles. Conserver les accumulateurs neufs usages
hors de portee des enfants. Sile compartiment de l’
accumulateur ne se ferme pas de maniere sure, ne
plus utiliser le produit et et le tenir hors de portee des
enfants. Encas de soupcon d’ingestion d’un accumu-
later ou d’introduction dans une partie quelconque du
corps, demander immediatement un avis medical.
Lithium Battery Type
Battery Removal or Installation
Lithium Battery
Figure 1
TAB
Figure 2
LIFT
UP
Figure 8
C
R
2
0
3
2
Contact
Points
Figure 7
C
R
2
0
3
2
CR2032
3V
Battery
Figure 3
Figure 4
CR2032
3V
Figure 6
CR2032
3V
Tabs
Figure 5
Battery
Socket
9. Press the tab and lift up on the Backup Battery Cov-
er and temporarily place it aside. Refer to gures 1
and 2.
10. When installing the battery into the remote control
proceed to step 11. To install the battery into a
product proceed to step 12.
11. Orient the battery so the + symbol (engraved into
one side of the battery) is facing up. Refer to figure
7. Then insert the battery into the socket. Make
sure the battery is touching both contact points and
is seated in the socket. Refer to figure 8.
12. Orient the battery so the + symbol (engraved into
one side of the battery) is facing up. Refer to fig-
ures 5 and 6. Then insert the battery into the sock-
et. Make sure the battery is touching both contact
points and is seated in the socket.
13. Reinstall the Battery Cover.
When discarding the unit, comply with local rules or
regulations. Batteries should never be thrown
away or incinerated but disposed of in accor-
dance with the local regulations concerning
battery disposal.
North American Waste of Electrical and Electronic
Equipment Directive
Lithium Battery, Types, Removal and Installation
Approved Lithium Batteries
Brand IEC No. ANSI/NEDA No.
Energizer CR2032 5004LC1
Panasonic CR2032(PA/1B)15004LC1
1CR Lithium Coin Cells contain Perchlorate - special handling may
apply. For additional information go to https://www.dtsc.ca.gov/
hazardouswaste/perchlorate/
ATTENTION:
Danger d’explosion si la pile n’set
pas remplacée correctement. Installer
uniquement l’une des piles au lithium
approuvées énumérées ci dessous.

Produktspezifikationen

Marke: McIntosh
Kategorie: EmpfÀnger
Modell: MC205

Brauchst du Hilfe?

Wenn Sie Hilfe mit McIntosh MC205 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung EmpfÀnger McIntosh

McIntosh

McIntosh MC-225 Bedienungsanleitung

2 Oktober 2024
McIntosh

McIntosh C1100C Bedienungsanleitung

20 September 2024
McIntosh

McIntosh MA7200 Bedienungsanleitung

31 August 2024
McIntosh

McIntosh DA2 Bedienungsanleitung

11 August 2024
McIntosh

McIntosh MC-30 Bedienungsanleitung

7 August 2024
McIntosh

McIntosh MC-1.2KW Bedienungsanleitung

2 August 2024
McIntosh

McIntosh MX170 Bedienungsanleitung

2 August 2024
McIntosh

McIntosh MX180 Bedienungsanleitung

30 Juli 2024
McIntosh

McIntosh MC302 Bedienungsanleitung

29 Juli 2024
McIntosh

McIntosh MI128 Bedienungsanleitung

28 Juli 2024

Bedienungsanleitung EmpfÀnger

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024