McIntosh MAC7200 Bedienungsanleitung

McIntosh Empfänger MAC7200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für McIntosh MAC7200 (40 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com

MAC7200

Receiver

Owner’s Manual

Your decision to own this McIntosh MAC7200 Re-

ceiver ranks you at the very top among discriminating

music listeners. You now have “The Best.” The McIn-

tosh dedication to “Quality,” is assurance that you will

receive many years of musical enjoyment from this

unit.

Please take a short time to read the information in

this manual. We want you to be as familiar as pos-

sible with all the features and functions of your new

McIntosh.

Table of Contents

Thank You

Please Take A Moment

Technical Assistance

If at any time you have questions about your McIntosh

product, contact your McIntosh Dealer who is familiar

with your McIntosh equipment and any other brands

that may be part of your system. If you or your Dealer

wish additional help concerning a suspected problem,

you can receive technical assistance for all McIntosh

products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3512

Fax: 607-724-0549

Customer Service

If it is determined that your McIntosh product is in

need of repair, you can return it to your Dealer. You

can also return it to the McIntosh Laboratory Service

Department. For assistance on factory repair return

procedure, contact the McIntosh Service Department

at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

The serial number, purchase date and McIntosh Dealer

name are important to you for possible insurance

claim or future service. The spaces below have been

provided for you to record that information:

Serial Number: _______________________________

Purchase Date: _______________________________

Dealer Name: ________________________________

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide”

Safety Instructions .............................................................. 2

(Separate Sheet) ............................Important Additional

Operation Information Guide

Thank You and Please Take a Moment 2 ...............................

Technical Assistance and Customer Service 2 .......................

Table of Contents .................................................................2

General Information ............................................................ 3

Connector and Cable Information ....................................... 4

Introduction .........................................................................5

Performance Features ...................................................... 5-6

Dimensions ..........................................................................7

Installation ...........................................................................8

Connections:

Rear Panel Connections 9 .......................................................

(Separate Sheet) ...........................................................Mc1A

Connecting Components ................................................... 10

Connection Diagrams (Separate Sheet) .................Mc2A/2B

Passthru Connections ........................................................ 11

Connecting for Bi-Amplification ...................................... 12

Connecting Loudspeakers ............................................ 13-14

Remote Control and Front Panel:

Remote Control Push-buttons ........................................... 16

How to use the Remote Control ......................................... 17

Front Panel Displays, Controls,

Push-buttons and Jack ....................................................... 18

Setup Mode:

How to Operate the Setup Mode ....................................... 19

Setup Functions:

Default Settings .........................................................19

Firmware Version ......................................................19

Source Input Renaming ....................................... 20-21

Output Settings ..........................................................21

Power Control Triggers 1 and 2 ................................. 22

Data Ports ................................................................... 23

Passthru ......................................................................23

USB Automute ...........................................................23

Comm Port Baud Rate ...............................................24

Remote Control Codes ............................................... 24

IR Sensor .................................................................... 24

Power Mode ...............................................................25

Tuner Presets .............................................................. 25

Tuner Regions ............................................................25

Factory Reset .............................................................27

Microprocessor Reset ........................................................ 27

Operation:

How to Operate the MAC7200 .....................................28-36

Trim Functions:

Balance ....................................................................... 28

Trim Level .................................................................. 29

Tone Control...............................................................29

Bass ............................................................................29

Treble ..........................................................................30

Phono Adjustments ....................................................30

Mono/Stereo Mode ....................................................30

Meter Backlight .........................................................31

Display Brightness .....................................................31

Headphone HXD ........................................................31

Tone, Trim, Mute ........................................................ 31

Headphone Jack, Power Output Meters, Power Guard,

Separate Power Amplifier, Using Output 2 ............... 32

Passthru, Optical and Coaxial Digital Inputs ............ 33

Operating the FM and AM Tuner ......................... 33-34

AM or FM Band Selection .................................... 33

Default Station Tuning ...................................... 33

Seek Tuning Type ............................................. 33

7. The MAC7200 Remote Control is capable of oper-

ating other components. For additional informa-

tion go to www.mcintoshlabs.com.

8. RF Multipath interferance can occur when the

MAC7200 receives two or more signals from the

Tuned in FM Broadcast Station. The first signal

received is the direct signal from the station and

additional signals received are delayed because

they have reflected off of a building or terrain

(hill/mountain). This delay results in an increase

in distortion and a reduction in Stereo Separa-

tion. To reduce or eliminate Multipath, reorient

the direction of the FM Antenna for minimum

indication of Multipath even if the Signal Strength

indicates less signal. Refer to pages 33 and 34.

9. The IR Input, with a 1/8 inch mini phone jack, is

configured for non-McIntosh IR sensors such as

Xantech Model DL85K Kit. Use a Connection

Block such as a Xantech Model ZC21 when two

or more IR sensors need to be connected to the

MAC7200. The signal from a connected External

IR Sensor will have priority over the signal from

the Front Panel IR Sensor.

10. When discarding the unit, comply with local rules

or regulations. Batteries should never be

thrown away or incinerated but disposed

of in accordance with the local regula-

tions concerning battery disposal.

11. For additional information on the MAC7200 and

other McIntosh Products please visit the McIntosh

Web Site at www.mcintoshlabs.com.

Table of Contents, con’t

Operating the FM and AM Tuner, con’t

Direct Access Tuning ........................................ 34

Preset Tuning ....................................................34

Create a Preset ............................................ 34

Erase a Preset .............................................. 34

Selecting a Preset ........................................ 34

Tuner Text ......................................................... 34

USB Input Operation with a Computer ....... 35-36

Specifications ....................................................... 37-38

Packing Instructions ................................................. 39

1. For additional connection information, refer to the

owner’s manual(s) for any component(s) connected

to the MAC7200.

2. Apply AC Power to the MAC7200 and other McIn-

tosh Component(s) only after all the system compo-

nents are connected together. Failure to do so may

cause a malfunction of system operations as the

Microprocessor’s Circuitry inside the components

is active when AC Power is applied.

3. The MAC7200 includes an Auto Off Power Save

Feature and the default setting is enabled. For

additional information including how to disable it,

refer to page 22.

4. When Power Amplifier Protection Circuitry of the

MAC7200 has activated, the Front Panel Power

Guard LEDs are illuminated continuously and the

sound will be muted.

5. When the Power Transformer has overheated due

to improper ventilation and/or high ambient operat-

ing temperature, AC Power is removed from the

MAC7200. Normal operation will resume when the

operating temperature is in a safe range again.

6. For the best performance and safety, it is important

to always match the impedance of the Loudspeaker

to the Power Amplifier connections. Refer to pages

13 and 14.

Note: The impedance of a Loudspeaker actually var-

ies as the Loudspeaker reproduces different

frequencies. As a result, the nominal impedance

rating of the Loudspeaker (usually measured at

a midrange frequency) might not always agree

with the impedance of the Loudspeaker at low

frequencies where the greatest amount of power

is required. Contact the Loudspeaker Manufac-

turer for additional information about the actual

impedance of the Loudspeaker before connecting

it to the McIntosh MAC7200.

General Information

Produktspezifikationen

Marke:	McIntosh
Kategorie:	Empfänger
Modell:	MAC7200

Brauchst du Hilfe?

Wenn Sie Hilfe mit McIntosh MAC7200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

nome*

email*

domanda

Bedienungsanleitung Empfänger McIntosh

McIntosh C55 Bedienungsanleitung

8 April 2024

McIntosh MC275 Bedienungsanleitung

25 März 2024

McIntosh MC-602 Bedienungsanleitung

22 März 2024

McIntosh MC1.2KW Bedienungsanleitung

24 Februar 2024

McIntosh MC-2120 Bedienungsanleitung

21 Februar 2024

McIntosh C22 Bedienungsanleitung

18 Februar 2024

McIntosh C1000T Bedienungsanleitung

10 Januar 2024

McIntosh MC-75 60th Anniversary Edition Bedienungsanleitung

9 Januar 2024

McIntosh MC452 Bedienungsanleitung

23 Dezember 2023

McIntosh MA252 Bedienungsanleitung

13 Dezember 2023

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Dimavery BA-30 Bedienungsanleitung

18 April 2024

TOA Trantec S5.3 Bedienungsanleitung

17 April 2024

Pioneer DMH-WT3800NEX Bedienungsanleitung

17 April 2024

NAD C 3050 LE Bedienungsanleitung

16 April 2024

Devialet Expert 220 Pro Bedienungsanleitung

16 April 2024

Cambridge Azur 851A Bedienungsanleitung

16 April 2024

AudioControl LC-6.1200 Bedienungsanleitung

16 April 2024

RCF FVM 9844 Bedienungsanleitung

16 April 2024

Zehnder ZX 67 Bedienungsanleitung

15 April 2024

Marantz PM6007 Bedienungsanleitung

15 April 2024