McIntosh CS200 Bedienungsanleitung

McIntosh Lautsprecher CS200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für McIntosh CS200 (6 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
CS200
Ceiling Loudspeaker System
Installation Guide
2
WARNING - TO REDUCE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
PERSONNEL.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
General:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Warning: To reduce risk of fire or electrical shock, do not
expose this equipment to rain or moisture. This unit is
capable of producing high sound pressure levels. Continued
exposure to high sound pressure levels can cause permanent
hearing impairment or loss. User caution is advised and ear
protection is recommended when playing at high volumes.
6. Only use attachments/accessories specified by the
manufacturer.
Installation:
7. Install in accordance with the manufacturer’s instructions.
8.When mounting the Ceiling Loudspeaker System to a
building structure it is important to follow all of the local
building/construction codes. Make sure the ceiling structural
members can support a total weight of five times the weight
of the Ceiling Loudspeaker System.
9. Do not install near any heat sources such as radiators, heat
registers, stoves, or other equipment (including amplifiers)
that produce heat.
10. Do not use this equipment near water.
11. Do not expose this equipment to dripping or splashing and
ensure that no objects filled with liquids, such as vases, are
placed on the equipment.
Care of Equipment:
12. Clean only with a dry cloth.
13. Do not permit objects or liquids of any kind to be pushed,
spilled and/or fall into the equipment through enclosure
openings.
Repair of Equipment:
14. Refer all servicing to qualified service personnel. Servicing
is required when the equipment has been damaged in any
way, liquid has been spilled or objects have fallen into
the equipment, the equipment has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Do not attempt to service beyond that described in the
operating instructions. All other service should be referred
to qualified service personnel.
16. When replacement parts are required, be sure the service
technician has used replacement parts specified by
McIntosh or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
17. Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Please read these Safety Instrucons as well
as the Important Additional Operation
Information Guide that is enclosed.
Thank you from all of us at McIntosh
You have invested in a precision instrument that will
provide you with many years of enjoyment. Please take a
few moments to familiarize yourself with the features and
instructions to get the maximum performance from your
equipment.
If you need further technical assistance, please contact
your McIntosh Dealer who may be more familiar with
your particular setup including other brands. You can also
contact us at McIntosh with additional questions or in the
unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone : (607) 723-3512 (Technical Assistance)
Phone: (607) 723-3515 (Customer Service)
Fax: 607-724-0549 (Customer Service)
Email: support@mcintoshlabs.com
Website: mcintoshlabs.com
Make a Note
For future reference, you can write your serial number and
purchase information here. We can identify your purchase
from this information if the occasion should arise.
Serial Number:
Purchase Date:
Dealer Name:
Important Safety Instrucons
3
Table of Contents
Important Safety Instructions ��������������������������������������� 2
Thank you from all of us at McIntosh ��������������������������� 2
Make a Note ������������������������������������������������������������������ 2
Ready To Perform ��������������������������������������������������������� 3
Choosing the Right Spot ����������������������������������������������� 3
Installation �������������������������������������������������������������������� 3
Fine Tune����������������������������������������������������������������������� 4
Speaker Diagram ���������������������������������������������������������� 4
Warranty ����������������������������������������������������������������������� 5
Specifications ���������������������������������������������������������������� 6
Drivers ��������������������������������������������������������������������������� 6
Ready To Perform
The CS200 Ceiling Loudspeaker System is designed to
provide exceptional performance. This 3-way speaker
features an 8 inch Woven Glass Fiber Woofer. Above the
Woofer sits an adjustable array with a Titanium Dome
tweeter and two Titanium Inverted Dome midrange
speakers from McIntosh’s acclaimed XRT speaker line.
The Midrange drivers and Tweeter are arranged in a
modiîš¿ed MTM array for optimal performance of the
high-end drivers.
The Low Proîš¿le Micro-Flange Grill is magnetically held
in place. These grills are ready to be painted if you wish.
Choosing the Right Spot
There are a few important things to consider when
choosing a location to mount the CS200:
• Can the location support at least 5 times the weight
of the CS200? This will be a vibrating mass located
possibly above your head. Make sure the material
where the CS200 will be mounted can hold more
than 30 pounds and is at least 3/8 inch (0.9525cm )
thick and a maximum of 2 inches (5.08cm). A depth
of at least 5 inches (12.7cm) is required.
• Can you run the necessary wires to the CS200?
• Is the position optimal for the purpose the speaker
will serve? Obviously, 2-channel and home theater
applications will have different speaker placement
considerations. Your McIntosh Dealer is an excellent
resource for speaker installation.
• Are there any obstacles that should be avoided like
heating and cooling ducts or high humidity from a
shower or sauna? And, of course, you should obey
all applicable building codes.
Installaon
1. After choosing the right spot, use the supplied
template to mark the area to be cut out.
2. For dry wall installation, use a drywall knife or saw
to cut a hole (see îš¿gure 1.1 on page 4). The hole
should be 9-5/8 inches (24.4475 cm) in diameter. The
full diameter of the CS200 is 11 inches (27.94cm)
For new construction, the RK200 rough-in bracket
is recommended. The RK200 is available from your
McIntosh Dealer.
3. Prepare Speaker Wires for connection to the CS200.
Remove ½ inch (12.7 mm) of insulation from the
wire end and twist the strands together. For runs
under 25 feet use at least 16AWG wire. For runs
under 50 feet use at least 14AWG, and for longer
runs up to 100 feet use 12AWG. 12AWG, being
the larger wire, can be used in all the above cases
if desired. Thicker wire may not îš¿t in the speaker
terminals.
4. Connect the exposed end of the wires to the spring-
loaded terminals. Push the terminal to open the hole.
Insert the wire making sure no loose strands are
exposed. Connect the positive speaker wire to the red
terminal and the negative to the black terminal.
Releasing the terminal will provide a secure
connection.
5. Carefully place the CS200 in the opening you
prepared in Step 2. You may choose to place some
îš¿berglass insulation loosely behind the speaker for
better isolation.
6. Using a #2 Phillips screwdriver, loosen the 4
clamping screws one turn counter-clockwise (see
diagrams on page 4). This will release the clamp.
Note the four clamp screws will be higher than the
nearby recessed screws.
7. Tighten the four screws evenly, turning each one
slightly in turn until each is tight.
8. Carefully install the Grille. The Grille is held in place
by magnets.
9. Enjoy.

Produktspezifikationen

Marke: McIntosh
Kategorie: Lautsprecher
Modell: CS200

Brauchst du Hilfe?

Wenn Sie Hilfe mit McIntosh CS200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher McIntosh

McIntosh

McIntosh XRT1.1K Bedienungsanleitung

17 September 2024
McIntosh

McIntosh ML1 Bedienungsanleitung

24 August 2024
McIntosh

McIntosh LCR80 Bedienungsanleitung

1 August 2024
McIntosh

McIntosh XRT2K Bedienungsanleitung

25 Juli 2024
McIntosh

McIntosh XR100 Bedienungsanleitung

20 Juli 2024
McIntosh

McIntosh RS100 Bedienungsanleitung

20 Juli 2024
McIntosh

McIntosh RS250 Bedienungsanleitung

15 Juli 2024
McIntosh

McIntosh XR200 Bedienungsanleitung

13 Juli 2024
McIntosh

McIntosh XLS320 Bedienungsanleitung

13 Juli 2024
McIntosh

McIntosh XRT2.1K Bedienungsanleitung

13 Juni 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024