MB Quart MBQ-STG2-BT Bedienungsanleitung

MB Quart Lautsprecher MBQ-STG2-BT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MB Quart MBQ-STG2-BT (48 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 40 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/48
For additional technical information on this and all MB QUART products, go to
the “SUPPORT” tab at MB QUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
UTV & RZR Tuned Audio Systems
MBQ-POD
8 Inch Compression Horns
For additional technical information on this and all MB QUART products, go to
the “SUPPORT” tab at MB QUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
MB QUART RZR Kick Panel pods
Thanks for choosing MB QUART. These 8 inch compression horn speaker components have
been meticulously engineered to install into your Polaris RZR. They are part of our Staged RZR
Tuned Audio Systems family of products See all the components, upgrades and Stages .
available for RZR on the website QUART.com MB
We have made the install process so simple, you will be in and out of the machine in about
an hour.
IMPORTANT Before you mount the speakers into the and mount the pods to the pods
RZR, you need to prepare the rear of the compression horn speakers. This entails removing
the back plate from each speaker and covering the exposed compression horn diaphragm
with the included cover.
The purpose of this process is to remove some of the depth of the speaker which in turn
reduces the amount of space you sacrifice in the foot well brilliant.
IN THE BOX
8 inch speakers (2)
RZR Kick Panel (2) pods
Compressions Horn Diaphragm covers (2)
Mounting Hardware (4 bolts, 4 nylon locking nuts, 8 washers)
Stainless Speaker Mounting screws (8 )
SAFETY
Always make your machine safe before installing any accessories
Turn the ignition off and remove the key
Remove the negative terminal of the battery
Safety Glasses - always wear eye protection
TIME & TOOLS
You will need to prepare the Compression Horns before permanently mounting them to the
pods. To keep installation quick it is best to mount the pods empty with no speakers installed.
This will keep install to about 1 HOUR.
For additional technical information on this and all MB QUART products, go to
the “SUPPORT” tab at MB QUART.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
TOOLS Required
T-40 Torx Bit Driver
Sharpie or Marker
Painters Tape 2 inch
1/2 inch Socket
#2 Philips Screw Driver
1/2 inch open wrench
Small or Angled Ratchet
Work light
Drill
1/8 inch drill bit
5/16 inch drill bit
NH1- Preparation 120B
Preparing your Compression Horn Diaphragm
In order t fit your compression horn speakers into the pod, you need to remove the back plate. o
This keeps the mounting depth of the pod as shallow as possible. We designed the pods with a
simple modification to the rear of the speaker.
We provide a protective plate because it is very important to the performance of your
compression horns to cover the compression diaphragm element.
STEP 1
Working on a flat surface, turn your speaker face down


Produktspezifikationen

Marke: MB Quart
Kategorie: Lautsprecher
Modell: MBQ-STG2-BT

Brauchst du Hilfe?

Wenn Sie Hilfe mit MB Quart MBQ-STG2-BT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher MB Quart

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-