Marshall JFX-1 Signal Processor Bedienungsanleitung

Marshall Gitarrenverstärker JFX-1 Signal Processor

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marshall JFX-1 Signal Processor (13 Seiten) in der Kategorie Gitarrenverstärker. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
U
S E R
M
A N U A L
From Jim Marshall
Warning List and Introduction
Section 1 - Connection Diagrams
A. With a Home / Recording Mixer
B. Stereo Rack System
C. With a Stereo or Mono Combo / Amp
Section 2 - Quick Reference Guide
2.1 - Selecting a Stored Pre-Set
2.2 - Editing Pre-Set Programs
2.3 - Storing Altered Parameter Values
2.4 - Naming a Program
Section 3 - Front Panel
3.1 - The Rear Panel
Section 4 - The Mixer Section
4.1 - Setting the Output Levels
Section 5 - Chorus / Flange Mode
5.1 - Chorus / Flange Types
5.2 - Chorus Parameters
5.3 - Creating a Chorus / Flange Program
Section 6 - Multi-Tap Mode
6.1 - Multi Tap Parameters
6.2 - Creating a Multi-Tap Program
Section 7 - Delay Mode
7.1 - Delay Types
7.2 - Delay Parameters
7.3 - Creating a Delay Program
Section 8 - Reverb Mode
8.1 - Reverb Mode
8.2 - Reverb Characters
8.3 - Reverb Parameters
8.4 - Creating a Reverb Program
Section 9 - Multi Effect Mode
9.1 - Multi-Effect Individual Features
9.2 - Multi-Effect Parameters
9.3 - Creating a Multi-Effect Program
Section 10 - Naming a Program
Section 11 - Storing a Program
Section 12 - The System Menu
12.1 - The Remote Jack
12.2 - MIDI Operations and Functions
12.3 - MIDI Channel
12.4 - Input and Output Mapping
12.5 - MIDI Controllers
12.6 - MIDI Controller Parameters for each Mode
12.7 - System Exclusive Back-up
12.8 - Battery Level
Section 13 - Re-Initialising the JFX-1
Section 14 - Specifications
Section 15 - JFX-1 Factory Pre-Sets
Section 16 - MIDI Implementation Chart
Section 17 - Program Information Sheets
JFX-1 Handbook Contents :
2
FRENCH GERMAN SPANISH JAPANESE
ENGLISH
WARNING!
PLEASE READ THE FOLLOWING LIST CAREFULLY
A. DO NOT attempt to remove the JFX-1’s lid, There are no user serviceable parts inside.
B. ALWAYS have this equipment serviced or repaired by competent, qualified personnel.
C. NEVER use the JFX-1 in damp or wet conditions.
D. ALWAYS use only the Marshall power supply that is provided with the JFX-1.
E. PLEASE READ this instruction manual carefully before switching on.
Introduction
The Marshall JFX-1 is a totally programmable 24 bit digital effects processor which features the
highest quality effects algorithms and also allows complete control via MIDI.
By utilising a 64x over-sampling 16 bit Sigma/Delta Analogue to Digital converter in conjunction
with 16 bit linear dual Digital to Analogue conversion, the JFX-1 produces effects that have superb
resolution and depth, with an absolute minimum of distortion and maximum dynamic range.
Also by incorporating a high quality Voltage Control Amplifier the all important dry signal is kept free
from degradation - essential for maintaining the integrity of your direct sound.
Although suitable for all processing applications the JFX-1 has been designed primarily as a guitar
rack effects processor. The first 50 programs have been pre-set at the Marshall factory but may be edited
in full. They can also be restored without loss of data custom programmed into memories 50 to 127. The
individual algorithms for Chorus/Flange, Multi-Tap Delay, Delay, Reverb and Multi-Effect, give you the
ability to edit and store a superb library of effects, with no unnecessary or redundant features to confuse
the issue.
If you want to use the JFX-1 with an amp head or combo which has channel switching facilities the
special Remote Jack can be programmed to activate the Channel switch as part of the selected program.
Whether you are recording in a professional or home studio or playing live through a combo or full
stereo rack system, the JFX-1 puts a vast range of creative possibilities instantly at your fingertips.
It is advisable to keep this manual in a safe place for future reference after studying it carefully, as
gaining a full understanding of how the JFX-1 operates will ensure that you are getting the most from it’s
processing power- especially when designing your own personal sounds.
Section 1 - Connection Diagrams
Manufactured in Great Britain by:
Marshall Amplification plc, Bletchley,
Milton Keynes, England.
Model No. JFX-1
WARNING! No user servicable parts inside;
refer servicing to qualified personel only.
Power
9V AC
1.2A
In
MIDI
THRU Out Remote Right Left Input
Outputs
FX Send L&R Return
JFX-1
Mixer
Set-up A: With a Home / Recording Mixer.


Produktspezifikationen

Marke: Marshall
Kategorie: Gitarrenverstärker
Modell: JFX-1 Signal Processor

Brauchst du Hilfe?

Wenn Sie Hilfe mit Marshall JFX-1 Signal Processor benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Gitarrenverstärker Marshall

Bedienungsanleitung Gitarrenverstärker

Neueste Bedienungsanleitung für -Kategorien-