Marshall AVT100 Bedienungsanleitung
Marshall
Gitarrenverstärker
AVT100
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marshall AVT100 (8 Seiten) in der Kategorie Gitarrenverstärker. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
1
ENGLISH
From Jim Marshall
I would like to thank you personally for selecting one of our
Valvestate 2000 AVT amplifiers.
Ever since its initial launch in the early 1990’s, the original
Marshall Valvestate technology received worldwide acclaim and set a
new standard in affordable quality amplification. However, my
dedicated team of designers are constantly looking for methods to
make our amplifiers sound even better. As they are all guitar players
themselves this process has become a passion within the design
department.
As the name Advanced Valvestate Technology (AVT) suggests,
your new amplifier benefits from their research and utilises their
latest circuit innovations, all of which are totally unique to Marshall.
By emulating the feel and response of an all-valve amplifier even
more closely, the new range perform brilliantly and representAVT
yet another major step forward in guitar sound technology.
I suggest that you read this manual thoroughly before operating
your new amplifier and keep it in a safe place for future reference.
This will help you to derive maximum enjoyment from our Advanced
Valvestate Technology.
Wishing you every success.
Yours Sincerely,
ENGLISH
2
WARNING! - Important sWARNING! - Important safety instructions
WARNING: THIS APPARATUS MUST BE EARTHED!
APLEASE
read this instruction manual carefully before switching on.
BALWAYS
use the supplied mains lead, if a replacement is required please contact your
authorised Marshall Dealer.
CNEVER
attempt to by-pass the fuses or fit ones of the incorrect value.
DDO NOT
attempt to remove the amplifier chassis, there are no user serviceable parts.
ERefer all servicing to qualified service personnel including replacement of fuses and
valves.
Servicing is required when the apparatus has been damaged in any way, such as
when the power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally or has been dropped.
FNEVER
use an amplifier in damp or wet conditions.
No objects filled with liquids should be
placed on the apparatus. When cleaning, only use a dry cloth.
GALWAYS
unplug this apparatus during lightning storms or if unused for long periods of time.
HProtect
the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and at the point where they exit from the apparatus.
IDO NOT
switch the amplifier on without the loudspeaker connected.
JENSURE
that any extension cabinets used are of the correct impedance.
âž²
EUROPE ONLY - Note:
This equipment has been tested and found to comply with the
requirements of the EMC directive (Environments E1, E2 and E3 EN 55103-1/2) and Low Voltage
directive in the E.U.
âž²
EUROPE ONLY - Note:
The Peak Inrush current for the AVT100 is 22 amps.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
â—†Reorient or relocate the receiving antenna.
â—†Increase the separation between the equipment and the receiver.
â—†Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
â—†Consult the dealer or an experienced radio/TV technician for help.
!
!
!
!!
Produktspezifikationen
| Marke: | Marshall |
| Kategorie: | Gitarrenverstärker |
| Modell: | AVT100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Marshall AVT100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker Marshall
23 September 2024
31 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Gitarrenverstärker
- Gitarrenverstärker Valeton
- Gitarrenverstärker Roland
- Gitarrenverstärker Vox
- Gitarrenverstärker Yamaha
- Gitarrenverstärker Peavey
- Gitarrenverstärker Fender
- Gitarrenverstärker Behringer
- Gitarrenverstärker Boss
- Gitarrenverstärker Line 6
- Gitarrenverstärker Radial Engineering
- Gitarrenverstärker Hartke
- Gitarrenverstärker ART
- Gitarrenverstärker Harley Benton
- Gitarrenverstärker Electro Harmonix
- Gitarrenverstärker Blackstar
- Gitarrenverstärker Bugera
- Gitarrenverstärker TC Electronic
- Gitarrenverstärker Palmer
- Gitarrenverstärker Ampeg
- Gitarrenverstärker Laney
- Gitarrenverstärker SPL
- Gitarrenverstärker Ashdown Engineering
- Gitarrenverstärker AER
- Gitarrenverstärker Markbass
- Gitarrenverstärker EBS
- Gitarrenverstärker Fishman
- Gitarrenverstärker Voodoo Lab
- Gitarrenverstärker GR Bass
- Gitarrenverstärker Two Notes
- Gitarrenverstärker Hughes & Kettner
- Gitarrenverstärker Dimavery
- Gitarrenverstärker AMT
- Gitarrenverstärker Budda
- Gitarrenverstärker Empress Effects
- Gitarrenverstärker DACS Audio
- Gitarrenverstärker Rivera
- Gitarrenverstärker DV Mark
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
19 September 2024
16 September 2024
6 September 2024
5 September 2024
5 September 2024