Marshall AS50D Bedienungsanleitung
Marshall
Gitarrenverstärker
AS50D
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marshall AS50D (4 Seiten) in der Kategorie Gitarrenverstärker. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
From the Chairman
I would like to thank you personally for selecting the AS50D, Acoustic
Soloist combo.
The Marshall name has been associated with many fine products over
the years and our commitment to quality remains as constant today as it
did right back at the birth of Marshall Amplification back in 1962.
In the case of the Acoustic Soloist, much time and research has gone
into making the sound as natural as possible. As all of my designers are
also guitarists, they fully understand the needs of the player and bring
their expertise to bear on all our products. You can also rest assured that
every Marshall amplifier has been designed and engineered to the
highest possible standards, so as a result will stand the test of time and
constant use.
I strongly suggest that you read this handbook carefully before using
your AS50D and then keep it on hand for future reference.
I am certain that you will get great enjoyment from your Marshall
Acoustic Soloist combo and wish you every success with it.
Yours Sincerely,
English
Introduction
Dr Jim Marshall OBE and daughter Victoria (Managing Director)
2
English
Note: When using the Chorus, higher speed
settings usually sound better with lower depth
settings and vice versa. Experiment to find which
selection suits you best.
14.
Reverb Balance Control
Controls the balance of the Reverb effect and the
parallel effects loop between Channel 1 and
Channel 2.
15.
Reverb Level Control
Controls the overall level of the Reverb effect.
16.
Phase Switch
Switching the phase can considerably reduce the
amount of low frequency acoustic feedback.
17.
Notch Filter Switch
Further feedback reduction can be achieved using
the selectable frequency notch filter. When
activated, the filter cuts by 10dB the frequency
selected using the rotary control (item 18).
18.
Frequency Control
If feedback occurs when the Master Volume is set
to the desired performance level, select the switch
(item 17) and rotate this control until the offending
frequency is eliminated.
19.
Master Volume
Controls the overall volume output from the
amplifier.
20.
Power Switch
This is the On/Off switch for the mains power to
the amplifier. When it is switched ‘On’, the switch
will light. Please ensure the amplifier is switched
off and unplugged from the mains electricity
supply before being moved.
Rear Panel Features
Technical Specification
1. Mains Input
Your amp is provided with a detachable mains
(power) lead that is connected here. The specific
mains input voltage rating that your amplifier has
been built for is clearly marked on the back panel.
Before connecting for the first time, please ensure
that your amplifier is compatible with your
electricity supply. If you have any doubts, please
get advice from a qualified person. Your Marshall
dealer can help you in this respect.
2. Footswitch Jack
Jack socket for connection of the optional
footswitch (model PEDL-10029) for switching the
Reverb and Chorus functions on and off.
3. Line Out Jack
Jack socket for connection to home recording or
other external equipment with jack inputs.
4. DI Out
XLR type output for connection to PA or similar
external equipment.
Note: Both the Line Out and DI out carry exactly
the same signal at different levels and both are
placed before the Master Volume so changing the
overall level of the amplifier will not affect the
signal from the DI or Line Output.
5. Effects Send Jack
Jack socket to connect to the input of an external
effects processor.
6. Effects Return Jack
Jack socket to connect to the output of an external
effects processor.
Power Output 50W RMS into 4 Ω
Main Guitar - Input Impedance 1M Ω
Line Output - Level -10dBV
FX Send +4dBV
Microphone - Input Impedance 1k Ω
Weight 16kg
Size (mm) 542 x 416 x 261
Produktspezifikationen
| Marke: | Marshall |
| Kategorie: | Gitarrenverstärker |
| Modell: | AS50D |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Marshall AS50D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker Marshall
23 September 2024
31 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Gitarrenverstärker
- Gitarrenverstärker Valeton
- Gitarrenverstärker Roland
- Gitarrenverstärker Vox
- Gitarrenverstärker Yamaha
- Gitarrenverstärker Peavey
- Gitarrenverstärker Fender
- Gitarrenverstärker Behringer
- Gitarrenverstärker Boss
- Gitarrenverstärker Line 6
- Gitarrenverstärker Radial Engineering
- Gitarrenverstärker Hartke
- Gitarrenverstärker ART
- Gitarrenverstärker Orange
- Gitarrenverstärker Harley Benton
- Gitarrenverstärker Electro Harmonix
- Gitarrenverstärker Blackstar
- Gitarrenverstärker Bugera
- Gitarrenverstärker TC Electronic
- Gitarrenverstärker Palmer
- Gitarrenverstärker Ampeg
- Gitarrenverstärker Laney
- Gitarrenverstärker SPL
- Gitarrenverstärker Ashdown Engineering
- Gitarrenverstärker Suhr
- Gitarrenverstärker AER
- Gitarrenverstärker Markbass
- Gitarrenverstärker EBS
- Gitarrenverstärker Fishman
- Gitarrenverstärker Voodoo Lab
- Gitarrenverstärker GR Bass
- Gitarrenverstärker Two Notes
- Gitarrenverstärker Hughes & Kettner
- Gitarrenverstärker Dimavery
- Gitarrenverstärker AMT
- Gitarrenverstärker Budda
- Gitarrenverstärker Empress Effects
- Gitarrenverstärker DACS Audio
- Gitarrenverstärker Rivera
- Gitarrenverstärker DV Mark
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
19 September 2024
16 September 2024
6 September 2024
5 September 2024
5 September 2024