Marshall Electronics CV620-TWI Bedienungsanleitung

Marshall Electronics Videokonferenzsystem CV620-TWI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marshall Electronics CV620-TWI (1 Seiten) in der Kategorie Videokonferenzsystem. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Marshall Electronics, Inc. | 20608 Madrona Avenue, Torrance, CA 90503 USA

Phone: Toll Free: (310) 333-0606 | (800) 800-6608 | (310) 333-0688 | Fax: Support@marshall-usa.com

Quick Setup & Operation of Marshall IP Cameras

Please find quick setup instructions below for Marshall IP camera models; CV630-IP/IPW, CV730-BK/WH,

CV620-BI/WI, CV355-30X-IP, CV420-30X-IP and CV420-30X

1. Marshall IP Cameras are set to a Static (fixed) IP address from factory (DHCP turned OFF) as the

default. Static IP address is set to 192.168.100.100

2. May need to set your computer to a different static IP address for instance 192.168.100.99 (or

other), done to ensure that computer is set to the same fixed IP address as the camera. not

3. Open a web browser and enter the camera’s default IP

address: 192.168.100.100

4. Login Menu will appear where you will enter administrator’s

account and password. Default is set to Account: and admin

Password: 9999

5. You now have operational control of the camera with preview

and ability to change settings.

For use with , follow these instructions: DHCP

1. After performing the above steps, use the web browser to

enter the cameras settings, select under Settings Network u

and change the camera to DHCP then push . On Apply y

2. Change your computer to . DHCP

3. Computer IP address will automatically be assigned by your

router network, so you may not know what it gets changed to.

4. To find the Camera’s DHCP address there are

several methods of discovery, one way would be to

use Onvif Device Manager. Another would be to use the Video Management Software

(VMS) downloadable from website product page (see image to left).

5. If ONVIF devise manager is preferred, download the Onvif program from the link below and use it

to discover the IP address of your camera. : Onvif is not a Marshall Electronics product, but is NOTE

widely used, and considered to be a safe free download.

Onvif Device Manager: https://sourceforge.net/projects/onvifdm/

The connected camera model# should appear during discovery process, select and control.

PLEASE : If your camera model comes with an IR remote, you can make necessary IP changes in OSD Menu as well. If you NOTE

have any questions or need additional assistance with the setup, please call 800-800-6608 ext. 1129

Produktspezifikationen

Marke:	Marshall Electronics
Kategorie:	Videokonferenzsystem
Modell:	CV620-TWI
Breite:	185 mm
Tiefe:	186 mm
Gewicht:	2000 g
Produktfarbe:	Weiß
Höhe:	174 mm
Energiequelle:	Gleichstrom
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 40 °C
Netzstandard:	IEEE 802.3at
Stromverbrauch (Standardbetrieb):	20 W
Stromverbrauch (max.):	23 W
HD-Typ:	Full HD
Anzahl HDMI-Anschlüsse:	1
Unterstützte Video-Modi:	720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen:	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Megapixel (ca.):	2 MP
Maximale Framerate:	60 fps
Zoom-Fähigkeit:	Ja
Maximale Video-Auflösung:	1920 x 1080 Pixel
Größe des Bildsensors:	1/2.8 "
PTZ Kontrolle:	Ja
Schwenkbereich:	0 - 340 °
Neigungswinkelbereich:	0 - 120 °
USB 3.2 Gen 1 (3.1 Gen 1) Anzahl der Anschlüsse vom Typ C:	1
Line-in:	Ja
Kamera-Typ:	Einzelne Kamera
Optischer Zoom:	20 x
Horizontales Blickfeld:	60 °
USB Type-C-Stecker:	Ja
Anzahl Power over Ethernet (PoE) Anschlüsse:	1
RS-422-Anschlüsse:	9
3G-SDI-Ausgang:	Ja