Marmitek StereoControl Bedienungsanleitung

Marmitek Fernbedienung StereoControl

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marmitek StereoControl (24 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/24

STEREOCONTRO

STEREOCONTROL

USER MANUAL 3

GEBRAUCHSANLEITUNG 6

GUIDE UTILISATEUR 9

MODO DE EMPLEO 12

MANUALE D’ISTRUZIONI 15

GEBRUIKSAANWIJZING 18

20164 / 20061109• STEREOCONTROL™

2 © MARMITEK

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose

the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or bright light sources.

• Do not open the product: the device contains live parts. The product should only be repaired or

serviced by a qualified repairman.

• In case of improper usage or if you have opened, altered and repaired the product yourself, all

guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the

product or when the product is used for purposes other than specified. Marmitek does not accept

responsibility for additional damage other than covered by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

• Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use

old and new batteries or different types of batteries together. Remove the batteries when you are not

using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting

them in the product. Wrong positioning can cause an explosion.

INTRODUCTION

Congratulations on the purchase of the StereoControl! With the StereoControl you can extend infrared

signals from your remote control. In this way you can continue to control your A/V-devices which are

behind closed cabinet doors or out of sight with your own remote control. The StereoControl consists of

an infrared receiver with two connected infrared (IR) LEDs. see Fig. 1.

• In the receiver you find a battery compartment for a 9 Volt battery.

• The two IR LEDs are equipped with a self-sticking foil. In this way, you can connect both IR LEDs to the

Infrared display panel of your A/V-devices.

Fig.1 StereoControl IR Receiver

HOW DOES THE STEREOCONTROL WORK?

• The receiver is placed directly in sight of your remote control.

• The receiver converts the signal from your remote control to an electric signal and passes it on to the

two IR LEDs.

• You can stick these IR LEDs on the IR sensor of your A/V-devices. The IR LEDs light up when you

give the command with your remote control. In this way, all signals from your remote control are

transmitted to your A/V-devices.

• StereoControl works with almost all bands and models of remote controls. (with the

exception of B&O).

3STEREOCONTROLTM

ENGLISH

Side view Front view

IR LEDs

Produktspezifikationen

Marke:	Marmitek
Kategorie:	Fernbedienung
Modell:	StereoControl
Breite:	90 mm
Tiefe:	30 mm
Höhe:	75 mm
Kabellänge:	3 m
Anzahl unterstützter Akkus/Batterien:	1
Frequenzband:	- GHz
Abmessungen (BxTxH):	90 x 30 x 75 mm
Kompatibilität:	DVD/VIDEO/SAT/DECODER
Maximale Reichweite:	4 m
LED-Übertragung:	2
Übertragungswinkel:	60 °
Blister-Abmessungen (B x T x H):	165 x 45 x 165