Marantz SR-8500 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marantz SR-8500 (57 Seiten) in der Kategorie Receiver. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/57
Model SR7500/SR8500 User Guide
AV Surround Receiver
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU’AU FOND.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the
NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by tuning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to
meet strict quality and safety standards. There are,
however, some installation and operation
precautions which you should be particularly
aware of.
1. Read Instructions – All the safety and
operating instructions should be read before
the product is operated.
2. Retain Instructions – The safety and operating
instructions should be retained for future
reference.
3. Heed Warnings – All warnings on the product
and in the operating instructions should be
adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Cleaning – Unplug this product from the wall
outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. Attachments – Do not use attachments not
recommended by the product manufacturer
as they may cause hazards.
7. Water and Moisture – Do not use this product
near water-for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the
like.
8. Accessories – Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to
a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
9. A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10. Ventilation – Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the product and to protect
it from overheating, and these openings must
not be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug, or other similar
surface. This product should not be placed in
a built-in installation such as a bookcase or
rack unless proper ventilation is provided or
the manufacturer’s instructions have been
adhered to.
11. Power Sources – This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate
from battery power, or other sources, refer to
the operating instructions.
12. Grounding or Polarization – This product may
be equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fit into the
power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized
plug.
AC POLARIZED PLUG
13. Power-Cord Protection – Power-supply cords
should be routed so that they are not likely to
be walked on or pinched by items placed upon
or against them, paying particular attention to
cords at plugs, convenience receptacles, and
the point where they exit from the product.
14. Protective Attachment Plug The product is–
equipped with an attachment plug having
overload protection. This is a safety feature.
See Instruction Manual for replacement or
resetting of protective device. If replacement
of the plug is required, be sure the service
technician has used a replacement plug
specified by the manufacturer that has the
same overload protection as the original plug.
15. Outdoor Antenna Grounding If an outside–
antenna or cable system is connected to the
product, be sure the antenna or cable system
is grounded so as to provide some protection
against voltage surges and built-up static
charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-
discharge unit, connection to grounding
el ectro de s, an d requiremen ts for the
grounding electrode. See Figure 1.
16. Lightning – For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
17. Power Lines An outside antenna system–
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
18. Overloading – Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
19. Object and Liquid Entry – Never push objects
of any kind into this product through openings
as they may touch dangerous voltage points
or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on
the product.
20. Servicing – Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
21. Damage Requiring Service Unplug this–
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects have
fallen into the product.
c. If the product has been exposed to rain or
water.
d. If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
e. If the product has been dropped or damaged
in any way, and
f. When the product exhibits a distinct change in
performance – this indicates a need for
service.
22. Replacement Parts When replacement–
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
23. Safety Check Upon completion of any–
service or repairs to this product, ask the
service technician to perform safety checks to
determine that the product is in proper
operating condition.
24. Wall or Ceiling Mounting – The product should
be mounted to a wall or ceiling only as
recommended by the manufacturer.
25. Heat – The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
FIGURE 1
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil num rique de la Classe B est conformeé
à la norme NMB-003 du Canada.
NEC - NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Produktspezifikationen
Marke: | Marantz |
Kategorie: | Receiver |
Modell: | SR-8500 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Marantz SR-8500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Receiver Marantz
30 August 2024
25 August 2024
9 August 2024
4 August 2024
31 Juli 2024
30 Juli 2024
29 Juli 2024
27 Juli 2024
26 Juli 2024
25 Juli 2024
Bedienungsanleitung Receiver
- Receiver Asus
- Receiver Hama
- Receiver Audio-Technica
- Receiver Logitech
- Receiver Manhattan
- Receiver Nedis
- Receiver Philips
- Receiver Sandberg
- Receiver Sony
- Receiver Roland
- Receiver MX Onda
- Receiver Vox
- Receiver TechniSat
- Receiver Yamaha
- Receiver Velleman
- Receiver Alecto
- Receiver Denver
- Receiver EMOS
- Receiver König
- Receiver MarQuant
- Receiver Renkforce
- Receiver Thomson
- Receiver Blaupunkt
- Receiver Kenwood
- Receiver Sharp
- Receiver Pyle
- Receiver Golden Age Project
- Receiver Aiwa
- Receiver AKG
- Receiver Bose
- Receiver Bowers And Wilkins
- Receiver Caliber
- Receiver Denon
- Receiver Pioneer
- Receiver JBL
- Receiver JVC
- Receiver Motorola
- Receiver Onkyo
- Receiver Sennheiser
- Receiver Shure
- Receiver Technics
- Receiver Vivanco
- Receiver Hifonics
- Receiver Megasat
- Receiver Smartwares
- Receiver Akai
- Receiver Dual
- Receiver Ferguson
- Receiver Strong
- Receiver Tascam
- Receiver Zoom
- Receiver Garmin
- Receiver Nexa
- Receiver Goobay
- Receiver Fenton
- Receiver TOA
- Receiver Rotel
- Receiver Musway
- Receiver Tripp Lite
- Receiver Audio Pro
- Receiver Cabasse
- Receiver Harman Kardon
- Receiver Magnat
- Receiver Marmitek
- Receiver Marshall
- Receiver Naim
- Receiver Power Dynamics
- Receiver Samson
- Receiver Scosche
- Receiver Skytec
- Receiver Vonyx
- Receiver Peavey
- Receiver Marshall Electronics
- Receiver Sagem
- Receiver Simrad
- Receiver AVM
- Receiver Xoro
- Receiver Karma
- Receiver Reely
- Receiver Edision
- Receiver GigaBlue
- Receiver Humax
- Receiver Kathrein
- Receiver Metronic
- Receiver Icom
- Receiver Alpine
- Receiver Rupert Neve Designs
- Receiver NAD
- Receiver Fender
- Receiver Renegade
- Receiver Ebode
- Receiver Vision
- Receiver Behringer
- Receiver Mackie
- Receiver Omnitronic
- Receiver MB Quart
- Receiver Monoprice
- Receiver Arcam
- Receiver Cambridge
- Receiver Crown
- Receiver Dynacord
- Receiver Ecler
- Receiver Luxman
- Receiver Monacor
- Receiver TEAC
- Receiver Thorens
- Receiver Crunch
- Receiver Chamberlain
- Receiver JUNG
- Receiver InLine
- Receiver Sangean
- Receiver Classé
- Receiver Sherwood
- Receiver Jamo
- Receiver AXTON
- Receiver Clarion
- Receiver Mac Audio
- Receiver Humantechnik
- Receiver Skytronic
- Receiver Audizio
- Receiver ESX
- Receiver Reloop
- Receiver Pinnacle
- Receiver Block
- Receiver Rega
- Receiver SYNQ
- Receiver Insignia
- Receiver DataVideo
- Receiver RCF
- Receiver Electro-Voice
- Receiver Cyrus
- Receiver Scansonic
- Receiver Sogo
- Receiver Delta Dore
- Receiver Salus
- Receiver Yorkville
- Receiver Elektrobock
- Receiver FiiO
- Receiver Boss
- Receiver IFM
- Receiver American Audio
- Receiver Anthem
- Receiver Roksan
- Receiver Engel Axil
- Receiver Alto
- Receiver Kopul
- Receiver Chord
- Receiver Kramer
- Receiver Hertz
- Receiver Pro-Ject
- Receiver Aeon Labs
- Receiver Galaxy Audio
- Receiver HQ Power
- Receiver Ibiza Sound
- Receiver Kicker
- Receiver Warm Audio
- Receiver Polk
- Receiver Line 6
- Receiver Bogen
- Receiver DBX
- Receiver McIntosh
- Receiver Sonance
- Receiver Jensen
- Receiver JL Audio
- Receiver Pyle Pro
- Receiver PreSonus
- Receiver Qtx
- Receiver Hartke
- Receiver ART
- Receiver Fredenstein
- Receiver LD Systems
- Receiver RDL
- Receiver Audiolab
- Receiver Summit Audio
- Receiver Black Lion Audio
- Receiver Bluesound
- Receiver GlobalSat
- Receiver Chandler
- Receiver DAP
- Receiver DAP Audio
- Receiver Denson
- Receiver DLS
- Receiver Focal
- Receiver Focusrite
- Receiver Formuler
- Receiver Fusion
- Receiver Ground Zero
- Receiver Helix
- Receiver Homecast
- Receiver Infinity
- Receiver JB Systems
- Receiver Koda
- Receiver Lanzar
- Receiver Legamaster
- Receiver Mercury
- Receiver Monitor Audio
- Receiver Mtx Audio
- Receiver Phoenix Gold
- Receiver REL Acoustics
- Receiver Selfsat
- Receiver Soundstream
- Receiver Steren
- Receiver Sunstech
- Receiver Terratec
- Receiver AMX
- Receiver Triax
- Receiver Wharfedale
- Receiver Phonic
- Receiver Adastra
- Receiver Siig
- Receiver Amiko
- Receiver Mooer
- Receiver AudioControl
- Receiver StarTech.com
- Receiver Blackstar
- Receiver QSC
- Receiver Dahua Technology
- Receiver Proel
- Receiver Niles
- Receiver Martin Logan
- Receiver Sound Devices
- Receiver Speco Technologies
- Receiver IFi Audio
- Receiver Gefen
- Receiver Polsen
- Receiver Russound
- Receiver Vocopro
- Receiver SRS
- Receiver Astell&Kern
- Receiver IMG Stage Line
- Receiver Inovonics
- Receiver Mosconi
- Receiver Atlas Sound
- Receiver CYP
- Receiver Amplicom
- Receiver Ampeg
- Receiver Bang Olufsen
- Receiver Lectrosonics
- Receiver ATen
- Receiver Eventide
- Receiver Laney
- Receiver SVS
- Receiver Citronic
- Receiver Crest Audio
- Receiver Lab Gruppen
- Receiver SPL
- Receiver Parasound
- Receiver Wet Sounds
- Receiver Pyramid
- Receiver Stewart
- Receiver Black Hydra
- Receiver Linn
- Receiver Roswell
- Receiver Music Hall
- Receiver Audac
- Receiver OSD Audio
- Receiver Match
- Receiver Neets
- Receiver EA
- Receiver BZBGear
- Receiver Crestron
- Receiver Accell
- Receiver Ibanez
- Receiver Pharos
- Receiver Kemo
- Receiver PSB
- Receiver Extron
- Receiver Comtek
- Receiver Ashdown Engineering
- Receiver Ram Audio
- Receiver Esoteric
- Receiver Xantech
- Receiver Artsound
- Receiver Rolls
- Receiver Sonifex
- Receiver Advance Acoustic
- Receiver Wireless Solution
- Receiver Manley
- Receiver Klark Teknik
- Receiver AVMATRIX
- Receiver Mark Levinson
- Receiver Ocean Matrix
- Receiver Markbass
- Receiver AmpliVox
- Receiver LEA
- Receiver Memphis Audio
- Receiver Televes
- Receiver Aquatic AV
- Receiver Ashly
- Receiver Fishman
- Receiver Integra
- Receiver CyberData Systems
- Receiver JETI
- Receiver SureCall
- Receiver ANKARO
- Receiver NUVO
- Receiver Audiofrog
- Receiver MuxLab
- Receiver Hegel
- Receiver Triangle
- Receiver Whirlwind
- Receiver Hughes & Kettner
- Receiver Palsonic
- Receiver Musical Fidelity
- Receiver A-NeuVideo
- Receiver Crest
- Receiver Primare
- Receiver C2G
- Receiver Fosi Audio
- Receiver AEA
- Receiver TechLogix Networx
- Receiver CE Labs
- Receiver Audiotec Fischer
- Receiver Shinybow
- Receiver Shanling
- Receiver Fontastic
- Receiver NuPrime
- Receiver Valcom
- Receiver Madison
- Receiver Topp Pro
- Receiver Whistler
- Receiver Powersoft
- Receiver LinksPoint
- Receiver Modelcraft
- Receiver Simaudio
- Receiver FSR
- Receiver Edwards Signaling
- Receiver IOTAVX
- Receiver Inter-M
- Receiver Soundtrack
- Receiver Canor
- Receiver Unison Research
- Receiver Clare Controls
- Receiver Technical Pro
- Receiver VMV
- Receiver Bellari
- Receiver Glemm
Neueste Bedienungsanleitung für -Kategorien-
8 September 2024
8 September 2024
8 September 2024
8 September 2024
7 September 2024
7 September 2024
7 September 2024
6 September 2024
6 September 2024
6 September 2024