Marantz M-CR603 Bedienungsanleitung

Marantz Empfänger M-CR603

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marantz M-CR603 (3 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3

CD RECEIVER

M-CR603 Addendum Sheet

Thank you for purchasing Marantz’s product. When you operate the unit, please read the User Guide and

this sheet.

Addition

Addition Zone Management Function

The “Device Control” item was added to the “Network” – “Other

Network” – “Zone Management” menu.

With “Device Control”, the network functions (Internet radio etc)

of the device selected in step 3 can be controlled using this unit.

1Press .[MENU]

The Menu appears on the display.

2Press ui to select “Network” – “Other Network”

– “Zone Management” from the menu, and then

press [ENTER/MEMO] <ENTER>, or p.

• The status of up to 10 other devices connected to the same

network can be displayed.

3Press ui to select the device, and then press

[ENTER/MEMO] <ENTER>, or p.

4Press ui to select “Device Control”, and then

press [ENTER/MEMO] <ENTER>, or p.

The network menu of the other person is displayed on this

unit’s display.

5Press , ui, [ENTER/MEMO] <ENTER> or p to

select the desired track.

• For information about how to operate, see the User Guide

provided with the product.

The zone management function can only be used on a combination

of devices that are equipped with the zone management function.

NOTE

The volume of the selected device can be controlled using this

unit, but the volume level is not displayed. Be careful not to

increase the volume too high.

ENGLISH

vpage 26 : Change

Menu map

Setting items Detailed items Description

Network

Party Mode

Starts or stops the party mode.

Party Mode Function Enable/disable the party mode.

Party Start Level Sets the volume used for the party mode.

Other Network Zone ManagementzDisplay and control a maximum of 10 devices that are connected to the

same network.

zItem name has been changed.

Party Mode Function

The same network audio (Internet radio, music server or iPod)

can be played on multiple products equipped with the Party

Mode function and connected in a network.

The party mode consists of one organizer and up to four

attendees.

When one unit starts the party mode as the organizer, up to

four devices on which the party mode function is activated

automatically participate in the party as attendees. “Party Mode

Function” must be set to “ON” ahead of time in order to use the

party mode function.

nSetting the Party Mode Function

1Press .[MENU]

The Menu appears on the display.

2Use ui to select “Network” – “Party Mode”

– “Party Mode Function”, then press [ENTER/

MEMO], or .<ENTER> p

“P-Mode Function” menu appears.

3Use ui to select “On” or “Off”, then press

[ENTER/MEMO] <ENTER>, or p.

On Enable party mode function.

Off Disable party mode function.

nStarting the party mode as the organizer

1Press .[MENU]

The Menu appears on the display.

2Use ui to select “Network” – “Party Mode”

– “Start Party”, then press [ENTER/MEMO],

<ENTER> or p.

• An error message is displayed when you are not connected

to a network.

• The input source automatically switches to “Music Server”

and the attendees are automatically selected.

3Play the desired station.

Canceling the party mode

1Press .[MENU]

The Menu appears on the display.

2Use ui to select “Network” – “Party Mode”

– “Stop Party”, then press [ENTER/MEMO],

<ENTER> or p.

“Exit Party Mode?” is displayed on the menu screen.

3Use ui to select “Yes”, then press [ENTER/

MEMO], or .<ENTER> p

“Attendee P.Off?” is displayed.

4Use ui to select “Yes” or “No”, then press

[ENTER/MEMO] <ENTER>, or p.

Yes The power of the attendees is turned off and the party

mode is canceled.

No The party mode is canceled without turning off the

power of the attendees.

nParticipating in the party mode as an attendee

• When the organizer starts the party mode, up to four

attendees are selected automatically. No operation is

required.

• When a device becomes an attendee, Party Mode Attendee

appears on the display. The input source automatically

switches to “Music Server” and the same network audio as

on the organizer is played.

• If there are fewer than four attendees, a device can join the

party mode after it has started. To participate in the party

mode, perform the operation described below.

1Press .[MENU]

The Menu appears on the display.

2Use ui to select “Network” – “Party Mode”

– “Start Party”, then press [ENTER/MEMO],

<ENTER> or p.

• An error message is displayed when you are not connected

to a network.

Selecting tracks from attendees

When the party mode starts, “Party Mode Attendee” appears

on the attendee’s display, after which the organizer’s playback

information appears.

1/3

I Gotta Feeling

0:21100%

Top 40

Party Mode Display Attendee Display

1Press to display the organizer’s input source.o

2Press ui to select the input source, then press

[ENTER/MEMO] <ENTER>, or p.

3Press ui to select the item you want to play, then

press [ENTER/MEMO] <ENTER>, or p.

Canceling the party mode

1Press .[MENU]

The Menu appears on the display.

2Use ui to select “Network” – “Party Mode”

– “Stop Party”, then press [ENTER/MEMO],

<ENTER> or p.

“Exit Party Mode?” is displayed on the menu screen.

3Use ui to select “Yes”, then press [ENTER/

MEMO], or .<ENTER> p

In this case, the other devices remain in the party mode.

“Last.fm”, “Napster” and “USB” are not available in the Party

Mode.

There can only be one organizer in the network. To form a new

party mode, ﬁ rst cancel the current party mode.

nSetting the Party Start Level

Make settings for volume level when the party mode is

started.

1Press .[MENU]

The Menu appears on the display.

2Use ui to select “Network” – “Party Mode” –

“Party Start Level”, then press [ENTER/MEMO],

<ENTER> or p.

Last The same volume as set before the party mode was

started.

00 Always use the muting on condition when the party

mode is started.

01 – 60dB Start party mode with your preferred volume.

This can be set when “Party Mode Function“ is set to “ON“.

Produktspezifikationen

Marke:	Marantz
Kategorie:	Empfänger
Modell:	M-CR603
Unterstützte Audioformate:	AAC, FLAC, LPCM, MP3, WAV, WMA
Breite:	111 mm
Tiefe:	280 mm
Gewicht:	4300 g
Produktfarbe:	Schwarz
Höhe:	302 mm
Unterstützte Bänder:	AM, FM
Digitales UKW-Radio:	87.5 - 108 MHz
Radio Data System (RDS):	Ja
RMS-Leistung:	120 W
Sleep-Timer:	Ja
Kopfhörerausgänge:	1
AUX-Eingang:	Ja
Anzahl USB 2.0 Anschlüsse:	1
Playback MP3:	Ja
Lautstärkeregler:	Drehregler
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	50 W
Betriebsanleitung:	Ja
Gerätetyp:	HiFi-CD-Player
Stromverbrauch (Standby):	0.4 W
Anzahl Kanäle:	2 Kanäle
THD, totalklirren:	0.05 %
Rauschverhältnis (SNR):	90 dB
Frequenzbereich:	5 - 22000 Hz
CD-R-Wiedergabe:	Ja
Fernbedienungstyp:	RC009CR
CD-RW-Wiedergabe:	Ja
Unterstützte Medientypen:	CD, CD-R, CD-RW
Audioanschlüsse:	3
Lademechanismus:	Ablage
Audioausgang:	1
CD-Wechsler:	Nein
Playback Disk-Formate:	CD-Audio
Anzahl der Cassettendecks:	1 Deck(s)