Marantec Comfort SU1100M Bedienungsanleitung
Marantec
Garagentoröffner
Comfort SU1100M
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marantec Comfort SU1100M (52 Seiten) in der Kategorie Garagentoröffner. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/52
Gear-motor for sliding gates
Getriebe für Schiebetore
Motoriduttori per cancelli scorrevoli
Motoreducteur pour coulissants
Motorreductores para puertas correderas
Motorredutores para portões de correr
Naped silnikowy do bram przesuwnych
COMFORT SU
SU500F, SU700M, SU1100M
2
EN
1
2
3
4
5
6
Safety warnings
2.1
2.2
4.1
4.2
4.3
4.4
4.5
4.6
5.1
5.2
5.3
Product overview
Product description
Models and technical characteristics
Preliminary checks
Installing the product
Installation
Installing the foundation box
Motor unlock
Fixing the plate
Rack assembling
Limit switch xing
Testing and commissioning
Testing
Commissioning
Instructions and warnings for the end user
Images
pag. 3
pag. 4
pag. 4
pag. 4
pag. 4
pag. 5
pag. 5
pag. 5
pag. 5
pag. 5
pag. 5
pag. 6
pag. 6
pag. 6
pag. 7
pag. 45
INDEX
7EC Declaration of Conformity pag. 49
3
EN
1 - SAFETY WARNINGS
ORIGINAL INSTRUCTIONS - important safety instructions. Fol-
low the instructions since incorrect installation can lead to se-
vere inquiry! Save these instructions.
Read the instructions carefully before proceeding with installation.
The design and manufacture of the devices making up the
product and the information in this manual are compliant with
current safety standards. However, incorrect installation or
programming may cause serious injury to those working on or
using the system. Compliance with the instructions provided
here when installing the product is therefore extremely impor-
tant.
If in any doubt regarding installation, do not proceed and contact the
Marantec Technical Service for clarications.
Under European legislation, an automatic door or gate system
must comply with the standards envisaged in the Directive
2006/42/EC (Machinery Directive) and in particular standards
EN 12453; EN 12635 and EN 13241-1, which enable declaration
of presumed conformity of the automation system.
Therefore, nal connection of the automation system to the electri-
cal mains, system testing, commissioning and routine maintenance
must be performed by skilled, qualied personnel, in observance of
the instructions in the “Testing and commissioning the automation
system” section.
The aforesaid personnel are also responsible for the tests required
to verify the solutions adopted according to the risks present, and for
ensuring observance of all legal provisions, standards and regula-
tions, with particular reference to all requirements of the EN12453
standard which establishes the test methods for testing door and
gate automation systems.
Before starting installation, perform the following checks and
assessments:
ensure that every device used to set up the automation system is
suited to the intended system overall. For this purpose, pay special
attention to the data provided in the “Technical specications” sec-
tion. Do not proceed with installation if any one of these devices is
not suitable for its intended purpose;
check that the devices purchased are sucient to guarantee system
safety and functionality;
perform a risk assessment, including a list of the essential safety
requirements as envisaged in Annex I of the Machinery Directive,
specifying the solutions adopted. The risk assessment is one of the
documents included in the automation system’s technical le. This
must be compiled by a professional installer.
Considering the risk situations that may arise during instal-
lation phases and use of the product, the automation system
must be installed in compliance with the following safety pre-
cautions:
never make modications to any part of the automation system other
than those specied in this manual. Operations of this type can only
lead to malfunctions. The manufacturer declines all liability for da-
mage caused by unauthorised modications to products;
if the power cable is damaged, it must be replaced by the manufac-
turer or its after-sales service, or in all cases by a person with similar
qualications, to prevent all risks;
do not allow parts of the automation system to be immersed in water
or other liquids. During installation ensure that no liquids are able to
enter the various devices;
should this occur, disconnect the power supply immediately and
contact a Marantec Service Centre. Use of the automation system in
these conditions may cause hazards;
never place automation system components near to sources of heat
or expose them to naked lights. This may damage system compo-
nents and cause malfunctions, re or hazards;
The drive shall be disconnected from its power source during
cleaning, maintenance and when replacing parts. If the discon-
nect device is not in a visible location, ax a notice stating:
“MAINTENANCE IN PROGRESS”:
connect all devices to an electric power line equipped with an
earthing system;
the product cannot be considered to provide eective protection
against intrusion. If eective protection is required, the automation
system must be combined with other devices;
the product may not be used until the automation system “commis-
sioning” procedure has been performed as specied in the “Automa-
tion system testing and commissioning” section;
the system power supply line must include a circuit breaker device
with a contact gap allowing complete disconnection in the conditions
specied by class III overvoltage;
use unions with IP55 or higher protection when connecting hoses,
pipes or cable glands;
the electrical system upstream of the automation system must com-
ply with the relevant regulations and be constructed to good wor-
kmanship standards;
this appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervi-
sion or instruction concerning use of the appliance in a safe way and
understand the hazards involved;
before starting the automation system, ensure that there is no-one
in the immediate vicinity;
before proceeding with any cleaning or maintenance work on the
automation system, disconnect it from the electrical mains;
special care must be taken to avoid crushing between the part ope-
rated by the automation system and any xed parts around it;
children must be supervised to ensure that they do not play with the
equipment.
that the drive cannot be used with a driven part incorporating a wi-
cket door unless the drive can only be operated with the wicket door
in the safe position;
The automation system component packaging material must
be disposed of in full observance of current local waste dispo-
sal legislation.
Marantec reserves the right to amend these instructions if ne-
cessary; they and/or any more recent versions are available at
www.marantec.com
Frequently examine the installation for imbalance where ap-
plicable and signs of wear or damage to cables, springs and
mounting.
Do not use if repair or adjustment is necessary.
ATTENTION !
ATTENTION !
ATTENTION !
ATTENTION !
ATTENTION !
Produktspezifikationen
| Marke: | Marantec |
| Kategorie: | Garagentoröffner |
| Modell: | Comfort SU1100M |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Marantec Comfort SU1100M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Garagentoröffner Marantec
1 Oktober 2024
22 September 2024
14 September 2024
26 August 2024
25 August 2024
25 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
Bedienungsanleitung Garagentoröffner
- Garagentoröffner Einhell
- Garagentoröffner Berner
- Garagentoröffner RADEMACHER
- Garagentoröffner Chamberlain
- Garagentoröffner Craftsman
- Garagentoröffner ProfiTech
- Garagentoröffner LiftMaster
- Garagentoröffner Hormann
- Garagentoröffner Sommer
- Garagentoröffner Superrollo
- Garagentoröffner Somfy
- Garagentoröffner Dickert
- Garagentoröffner DITEC
- Garagentoröffner Doco
- Garagentoröffner Doorsystems
- Garagentoröffner Entrematic
- Garagentoröffner FAAC
- Garagentoröffner Geba Tronic
- Garagentoröffner Goris
- Garagentoröffner Homentry
- Garagentoröffner MAC
- Garagentoröffner Novoferm
- Garagentoröffner Novotecnica
- Garagentoröffner Seculux
- Garagentoröffner Silver
- Garagentoröffner Skylink
- Garagentoröffner Tormatic
- Garagentoröffner Univer
- Garagentoröffner Maveo
- Garagentoröffner Aperto
- Garagentoröffner Abon
Neueste Bedienungsanleitung für -Kategorien-
30 September 2024
29 September 2024
23 September 2024
30 August 2024
28 August 2024
27 August 2024
27 August 2024
26 August 2024
26 August 2024
26 August 2024