Marantec Comfort RA2224 Bedienungsanleitung
Marantec
Garagepoortopener
Comfort RA2224
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Marantec Comfort RA2224 (52 Seiten) in der Kategorie Garagepoortopener. Dieser Bedienungsanleitung war fĂŒr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/52
Motoriduttore interrato
Under grounded gear motor
Motoreducteur enterré
Motorreductor interrado
Unrterflur-Drehtorantrieb
Motorredutor interrado
Podziemny motoreduktor
UNDER
Istruzioni ed avvertenze per lâinstallazione e lâuso
Instructions and warnings for installation and use
Instrucciones y advertencias para su instalaciĂłn y uso
Anleitungen und Hinweise zu Installation und Einsatz
InstruçÔes e advertĂȘncias para a instalação e utilização
Instructions et avertissements pour lâinstallation et lâusage
Management
System
ISO 9001:2008
www.tuv.com
ID 9105043769
COMFORT RA
RA2224, RA2224E, RA4224E
Gear motor for hinged gates
Antriebe fĂŒr Drehtore
Motoriduttore per cancelli a battente
Motorreductor para cancelas batientes
Motoréducteur pour portails à battants
Motorredutores para portÔes de batente
Motoreduktor do bram skrzydĆowych
2
EN
1
2
3
4
5
6
Safety warnings
2.1
2.2
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
5.1
5.2
5.3
Product overview
Product description
Models and characteristics
Preliminary checks
Installing the product
Installation
Installing the rear îżxing bracket with inward opening
Installing the front îżxing bracket with inward opening
Installing the rear îżxing bracket with outward opening
Installing the front îżxing bracket with outward opening
Installing the gear motor
Electrical connections
Setting of the mechanical limit switch while opening
Testing and commissioning
Testing
Commissioning
Instructions and warnings for the end user
Figures
p. 3
p. 4
p. 4
p. 4
p. 4
p. 5
p. 5
p. 5
p. 5
p. 5
p. 5
p. 6
p. 6
p. 6
p. 6
p. 6
p. 6
p. 7
p. 45
INDEX
7EC Declaration of Conformity p. 51
3
EN
1 - SAFETY WARNINGS
ORIGINAL INSTRUCTIONS - important safety instructions. Fol-
low the instructions since incorrect installation can lead to se-
vere inquiry! Save these instructions.
Read the instructions carefully before proceeding with installation.
The design and manufacture of the devices making up the
product and the information in this manual are compliant with
current safety standards. However, incorrect installation or
programming may cause serious injury to those working on or
using the system. Compliance with the instructions provided
here when installing the product is therefore extremely impor-
tant.
If in any doubt regarding installation, do not proceed and contact the
Marantec Technical Service for clariîżcations.
Under European legislation, an automatic door or gate system
must comply with the standards envisaged in the Directive
2006/42/EC (Machinery Directive) and in particular standards
EN 12453; EN 12635 and EN 13241-1, which enable declaration
of presumed conformity of the automation system.
Therefore, îżnal connection of the automation system to the electri-
cal mains, system testing, commissioning and routine maintenance
must be performed by skilled, qualiîżed personnel, in observance of
the instructions in the âTesting and commissioning the automation
systemâ section.
The aforesaid personnel are also responsible for the tests required
to verify the solutions adopted according to the risks present, and for
ensuring observance of all legal provisions, standards and regula-
tions, with particular reference to all requirements of the EN12453
standard which establishes the test methods for testing door and
gate automation systems.
Before starting installation, perform the following checks and
assessments:
ensure that every device used to set up the automation system is
suited to the intended system overall. For this purpose, pay special
attention to the data provided in the âTechnical speciîżcationsâ sec-
tion. Do not proceed with installation if any one of these devices is
not suitable for its intended purpose;
check that the devices purchased are suïcient to guarantee system
safety and functionality;
perform a risk assessment, including a list of the essential safety
requirements as envisaged in Annex I of the Machinery Directive,
specifying the solutions adopted. The risk assessment is one of the
documents included in the automation systemâs technical îżle. This
must be compiled by a professional installer.
Considering the risk situations that may arise during instal-
lation phases and use of the product, the automation system
must be installed in compliance with the following safety pre-
cautions:
never make modiîżcations to any part of the automation system other
than those speciîżed in this manual. Operations of this type can only
lead to malfunctions. The manufacturer declines all liability for da-
mage caused by unauthorised modiîżcations to products;
if the power cable is damaged, it must be replaced by the manufac-
turer or its after-sales service, or in all cases by a person with similar
qualiîżcations, to prevent all risks;
do not allow parts of the automation system to be immersed in water
or other liquids. During installation ensure that no liquids are able to
enter the various devices;
should this occur, disconnect the power supply immediately and
contact a Marantec Service Centre. Use of the automation system in
these conditions may cause hazards;
never place automation system components near to sources of heat
or expose them to naked lights. This may damage system compo-
nents and cause malfunctions, îżre or hazards;
The drive shall be disconnected from its power source during
cleaning, maintenance and when replacing parts. If the discon-
nect device is not in a visible location, aïx a notice stating:
âMAINTENANCE IN PROGRESSâ:
connect all devices to an electric power line equipped with an
earthing system;
the product cannot be considered to provide eïective protection
against intrusion. If eïective protection is required, the automation
system must be combined with other devices;
the product may not be used until the automation system âcommis-
sioningâ procedure has been performed as speciîżed in the âAutoma-
tion system testing and commissioningâ section;
the system power supply line must include a circuit breaker device
with a contact gap allowing complete disconnection in the conditions
speciîżed by class III overvoltage;
use unions with IP55 or higher protection when connecting hoses,
pipes or cable glands;
the electrical system upstream of the automation system must com-
ply with the relevant regulations and be constructed to good wor-
kmanship standards;
this appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervi-
sion or instruction concerning use of the appliance in a safe way and
understand the hazards involved;
before starting the automation system, ensure that there is no-one
in the immediate vicinity;
before proceeding with any cleaning or maintenance work on the
automation system, disconnect it from the electrical mains;
special care must be taken to avoid crushing between the part ope-
rated by the automation system and any îżxed parts around it;
children must be supervised to ensure that they do not play with the
equipment.
that the drive cannot be used with a driven part incorporating a wi-
cket door unless the drive can only be operated with the wicket door
in the safe position;
The automation system component packaging material must
be disposed of in full observance of current local waste dispo-
sal legislation.
Marantec reserves the right to amend these instructions if ne-
cessary; they and/or any more recent versions are available at
www.marantec.com
Frequently examine the installation for imbalance where ap-
plicable and signs of wear or damage to cables, springs and
mounting.
Do not use if repair or adjustment is necessary.
ATTENTION !
ATTENTION !
ATTENTION !
ATTENTION !
ATTENTION !
Produktspezifikationen
Marke: | Marantec |
Kategorie: | Garagepoortopener |
Modell: | Comfort RA2224 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Marantec Comfort RA2224 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Garagepoortopener Marantec
14 September 2024
25 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
Bedienungsanleitung Garagepoortopener
- Garagepoortopener Berner
- Garagepoortopener Chamberlain
- Garagepoortopener Craftsman
- Garagepoortopener ProfiTech
- Garagepoortopener LiftMaster
- Garagepoortopener Hormann
- Garagepoortopener Sommer
- Garagepoortopener Superrollo
- Garagepoortopener Dickert
- Garagepoortopener DITEC
- Garagepoortopener Doco
- Garagepoortopener Entrematic
- Garagepoortopener Geba Tronic
- Garagepoortopener Goris
- Garagepoortopener MAC
- Garagepoortopener Novoferm
- Garagepoortopener Seculux
- Garagepoortopener Tormatic
Neueste Bedienungsanleitung fĂŒr -Kategorien-
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024