Makita LC1230N Bedienungsanleitung

Makita Säge LC1230N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita LC1230N (12 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Metal Cutting Saw

LC1230

003770

ENGLISH (Original instructions)

SPECIFICATIONS

Model LC1230

Blade diameter 305 mm

Hole (arbor) diameter 25.4 mm

No load speed (min

-1) 1,300

Dimensions (L x W x H) 516 mm x 306 mm x 603 mm

Net weight 19.3kg

Safety class /II

Cutting capacity

Workpiece shape

BA X B

90° 115mm

75 mm x 150 mm 100 mm x 100 mm

Cutting angle 45° 90mm 85 mm x 85mm

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END205-3

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ To avoid injury from flying debris, keep

holding the saw head down, after

making cuts, until the blade has come to

a complete stop.

･ For your safety, remove the chips, small

pieces, etc. from the table top before

operation.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE008-1

Intended use

The tool is intended for cutting in mild steel and stainless

steel with appropriate saw blades.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.25 Ohms it can be

presumed that there will be no negative effects. The

mains socket used for this device must be protected with

a fuse or protective circuit breaker having slow tripping

characteristics.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN61029:

Sound pressure level (L

pA ) : 98 dB(A)

Sound power level (L

WA ) : 108 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN61029:

Vibration emission (ah) : 4.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH003-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Metal Cutting Saw

Model No./ Type: LC1230

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN61029

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

ENA001-2

SAFETY INSTRUCTIONS

WARNING! When using electric tools, basic safety

precautions, including the following, should always

be followed to reduce the risk of fire, electric shock

and personal injury. Read all these instructions

before operating this product and save these

instructions.

For safe operations:

1. Keep work area clean.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose power tools to rain. Do not use

power tools in damp or wet locations. Keep work

area well lit. Do not use power tools where there is

risk to cause fire or explosion.

3. Guard against electric shock.

Avoid body contact with earthed or grounded

surfaces (e.g. pipes, radiators, ranges,

refrigerators).

4. Keep children away.

Do not let visitors touch the tool or extension cord.

All visitors should be kept away from work area.

5. Store idle tools.

When not in use, tools should be stored in a dry,

high or locked up place, out of reach of children.

6. Do not force the tool.

It will do the job better and safer at the rate for

which it was intended.

7. Use the right tool.

Do not force small tools or attachments to do the

job of a heavy duty tool. Do not use tools for

purposes not intended; for example, do not use

circular saws to cut tree limbs or logs.

8. Dress properly.

Do not wear loose clothing or jewellery, they can

be caught in moving parts. Rubber gloves and

non-skid footwear are recommended when

working outdoors. Wear protecting hair covering to

contain long hair.

9. Use safety glasses and hearing protection.

Also use face or dust mask if the cutting operation

is dusty.

Produktspezifikationen

Marke:	Makita
Kategorie:	Säge
Modell:	LC1230N
Breite:	306 mm
Tiefe:	516 mm
Gewicht:	19300 g
Höhe:	303 mm
Eingangsleistung:	1750 W
Energiequelle:	AC
Kabellänge:	2.5 m
Vibrationsemission:	2.5 m/s²
Ausgangsleistung:	- W
Klingendurchmesser:	305 mm
Leerlaufdrehzahl (max.):	1300 RPM
Schnitttiefe bei (90º):	100 mm
Schallleistungspegel:	111 dB
Schalldruckpegel:	98 dB
Klingenbohrung:	25.4 mm