Makita EK6100 Bedienungsanleitung
Makita
Zaagmachine
EK6100
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita EK6100 (28 Seiten) in der Kategorie Zaagmachine. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
Important:
Read this instruction manual carefully before putting the Power Cut into operation and strictly observe the
safety regulations!
Keep this instruction manual!
Instruction Manual
Original Instruction Manual
EK6100
EK6101
2
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA Power Cut cutoff saw!
Like our chain saws, the MAKITA Power Cuts feature spe-
cially designed high-performance engines with outstanding
power-to-weight ratios, for heavy-duty yet lightweight tools.
Other advantages of the MAKITA Power Cuts:
• Sturdy construction and high reliability.
• Maintenance-free electronic ignition, hermetically sealed to
protect against dust and moisture.
• Vibration damping with the MAKITA 2-mass system (D2M) for
tireless working even when guiding the Power Cut by hand.
• Multilevel air Þ lter system with turbo-cyclone Þ lter for depen-
dable function even under very dusty conditions.
• The Featherlight-Start system lets you start the cutter effort-
lessly with a spring-loaded starting assist.
• Extensive range of resin-bonded and diamond grit cutting
discs.
The following industrial property rights apply:
DE 202010000143 U1, DE 202011050393 U1, DE 202011050396
U1, DE 202011050394 U1, DE 202010004275 U1, DE
202009010557 U1, DE 202009006860 U1, DE 202008003781
U1.
We want you to be satisÞ ed with your MAKITA product.
In order to guarantee the optimal function and performance of
your Power Cut and to ensure your personal safety we would
request you to perform the following:
Read this instruction manual carefully before putting the
Power Cut into operation for the Þ rst time, and strictly
observe the safety regulations! Failure to observe these
precautions can lead to severe injury or death!
EU Conformity Declaration
The undersigned, Tom as authorized by oyasu Kato, MAKITA
Corporation, declare that the MAKITA machines,
Type: 315
Power Cut EK6100, EK6101
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho,
Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and
health requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive
2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the re-
quirements of the above EU Directive were: EN 19432, CISPR
12, EN ISO 14982, DIN EN 61000-4.
The conformity assessment procedure 2000/14/EG was per-
formed per Annex V. The measured noise level (Lwa) is 114
dB(A). The guaranteed noise level (Ld) is 115 dB(A).
The technical documentation is on Þ le at MAKITA International
Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks,
MK15 8JD, England.
Anjo, 20.8.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director
Table of contents Page
Packing ................................................................................ 2
Delivery inventory .............................................................. 3
Symbols ...............................................................................3
SAFETY PRECAUTIONS
Intended use ................................................................... 4
General precautions ....................................................... 4
Protective equipment ...................................................4-5
Fuels / Refuelling ............................................................ 5
Putting into operation ...................................................... 5
Cutting discs ................................................................... 6
Kickback and lock-in .......................................................7
Working behavior / Method of working ............................ 7
Always observe the following when using
synthetic resin cutting discs ............................................. 8
Cutting metal ................................................................... 8
Cutting masonry and concrete .....................................8-9
Transport and storage .....................................................9
Maintenance ................................................................. 10
First aid ......................................................................... 10
Disposal and environmental protection ......................... 10
Technical data ................................................................... 11
Denomination of components ......................................... 12
PUTTING INTO OPERATION
Mounting the cutting disc ............................................... 13
Fuels / Refuelling ..................................................... 14-15
Starting the engine ........................................................ 16
Cold-starting .................................................................16
Warm-starting ............................................................... 16
Stop engine ................................................................... 16
Adjusting the carburetor .................................................. 17
MAINTENANCE
Changing the V-belt ...................................................... 18
Cleaning the protection hood ........................................ 19
Cleaning / changing the air Þ lter ...................................19
Replacing the spark plug .............................................. 20
Checking the ignition spark ............................................ 20
Replacing the suction head ..........................................20
Replacing the starter cable ........................................... 21
Replacing the return spring ...........................................22
Replacing the start spring ............................................. 22
Instructions for periodic maintenance ........................... 23
Service, spare parts and guarantee ........................... 23-24
Troubleshooting ...............................................................25
SPECIAL ACCESSORIES
Diamond cutting discs, water tank ................................. 25
Extract from spare parts list ....................................... 26-27
Packing
Your MAKITA Power Cut is packed in a cardboard box to pr e-
vent shipping damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).
3
Delivery inventory
1. Power Cut
2. Cutting disc (not in the general scope of delivery. Country-speciÞ c)
3. Screwdriver (for carburetor adjustment)
4. Offset screwdriver
5. Universal wrench 13/19
6. Instruction manual (not shown)
Symbols
You will notice the following symbols on the Power Cut and in the Instruction Manual:
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
Read instruction manual and
follow the warning- and safety
precautions!
Particular care and caution!
Forbidden!
Wear helmet and eye, respiratory
and hearing protection!
Wear protective gloves!
Wear respiratory protection!
Hazardous dust and/or
gas emission!
Fire hazard from ß ying sparks!
No smoking!
No open Þ re!
Direction of cutting wheel rotation
Warning: the max. peripheral
speed of the cutting disc is 80 m/s!
Cutting disc dimensions
Never use circular saw blades!
Never use damaged cutting discs!
Combination switch
Choke, On/Stop
Safety position
Start engine
Stop engine!
Warning!
Kickback!
Fuel and oil mixture
First aid
Recycling
CE - Marking
54 3 21
Produktspezifikationen
Marke: | Makita |
Kategorie: | Zaagmachine |
Modell: | EK6100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita EK6100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zaagmachine Makita
3 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
24 September 2024
15 September 2024
31 August 2024
31 August 2024
25 August 2024
20 August 2024
Bedienungsanleitung Zaagmachine
- Zaagmachine Brennenstuhl
- Zaagmachine Cotech
- Zaagmachine Bosch
- Zaagmachine Flex
- Zaagmachine Parkside
- Zaagmachine Vonroc
- Zaagmachine AEG
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine FERM
- Zaagmachine Ryobi
- Zaagmachine Skil
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Maestro
- Zaagmachine Prime3
- Zaagmachine Hilti
- Zaagmachine Bort
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Festool
- Zaagmachine Mafell
- Zaagmachine Maktec
- Zaagmachine Worx
- Zaagmachine Tacklife
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Hyundai
- Zaagmachine Fuxtec
- Zaagmachine Kress
- Zaagmachine Max
- Zaagmachine Metabo
- Zaagmachine Stanley
- Zaagmachine Atika
- Zaagmachine Güde
- Zaagmachine Power Craft
- Zaagmachine Scheppach
- Zaagmachine Workzone
- Zaagmachine Biltema
- Zaagmachine Meec Tools
- Zaagmachine Dremel
- Zaagmachine Fieldmann
- Zaagmachine Proxxon
- Zaagmachine Westfalia
- Zaagmachine Remington
- Zaagmachine Husqvarna
- Zaagmachine Stihl
- Zaagmachine Dedra
- Zaagmachine DURO
- Zaagmachine Graphite
- Zaagmachine Pattfield
- Zaagmachine Silverline
- Zaagmachine Holzmann
- Zaagmachine Florabest
- Zaagmachine Stiga
- Zaagmachine Hammer
- Zaagmachine ACG
- Zaagmachine Greenworks
- Zaagmachine Huvema
- Zaagmachine Robust
- Zaagmachine Zipper
- Zaagmachine Yato
- Zaagmachine Baumr-AG
- Zaagmachine Genesis
- Zaagmachine BluCave
- Zaagmachine Morrison
- Zaagmachine Batavia
- Zaagmachine Evolution
- Zaagmachine Matrix
- Zaagmachine Dolmar
- Zaagmachine Bavaria
- Zaagmachine Brüder Mannesmann
- Zaagmachine Milwaukee
- Zaagmachine Narex
- Zaagmachine Toolcraft
- Zaagmachine Fein
- Zaagmachine AL-KO
- Zaagmachine CMI
- Zaagmachine IDEAL
- Zaagmachine Cobra
- Zaagmachine Verto
- Zaagmachine Craftsman
- Zaagmachine Powerplus
- Zaagmachine Alpha Tools
- Zaagmachine Echo
- Zaagmachine Elektra Beckum
- Zaagmachine Toledo
- Zaagmachine McCulloch
- Zaagmachine Ozito
- Zaagmachine Yard Force
- Zaagmachine Sun Joe
- Zaagmachine Solo
- Zaagmachine Texas
- Zaagmachine Ridgid
- Zaagmachine Porter-Cable
- Zaagmachine VARO
- Zaagmachine Spear & Jackson
- Zaagmachine Duro Pro
- Zaagmachine Erbauer
- Zaagmachine Ergofix
- Zaagmachine Exakt
- Zaagmachine Ferrex
- Zaagmachine FOM
- Zaagmachine Gamma
- Zaagmachine Gardenline
- Zaagmachine Global
- Zaagmachine Goon
- Zaagmachine Grizzly
- Zaagmachine Gude Pro
- Zaagmachine HURRICANE
- Zaagmachine Lux Tools
- Zaagmachine Max Bahr
- Zaagmachine Maxx
- Zaagmachine Qualcast
- Zaagmachine Tanaka
- Zaagmachine Toolson
- Zaagmachine Troy-Bilt
- Zaagmachine Avantco
- Zaagmachine Wolfcraft
- Zaagmachine Masport
- Zaagmachine Garland
- Zaagmachine Meister Craft
- Zaagmachine Clarke
- Zaagmachine Sovereign
- Zaagmachine Challenge
- Zaagmachine Challenge Xtreme
- Zaagmachine Truper
- Zaagmachine Vulcan
- Zaagmachine MacAllister
- Zaagmachine RIKON
- Zaagmachine Backyard Pro Butcher Series
- Zaagmachine Jonsered
- Zaagmachine Einhell Bavaria
- Zaagmachine Proviel
- Zaagmachine Tryton
- Zaagmachine MTM
- Zaagmachine EFA
- Zaagmachine MyTool
- Zaagmachine McKenzie
- Zaagmachine Anova
- Zaagmachine Yellow Garden Line
- Zaagmachine Ergotools Pattfield
- Zaagmachine IKRA
- Zaagmachine FIXIT
- Zaagmachine Bestgreen
- Zaagmachine BGU
- Zaagmachine Power Smart
- Zaagmachine Ultranatura
- Zaagmachine TAURUS Titanium
- Zaagmachine Maxbear
- Zaagmachine Extralink
- Zaagmachine Stalco
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024