Makita EA7900P Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Makita EA7900P (76 Seiten) in der Kategorie SĂ€ge . Dieser Bedienungsanleitung war fĂŒr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/76
1
EA7300P
EA7900P
Operatorâs and Safety Manual
for Gasoline Chain Saws (page 2 - 39)
Manuel dâemploi et de sĂ©curitĂ©
de tronçonneuses thermiques (page 40 - 77)
WARNING!
Read and understand this Manual. Always follow safety precautions in the Operatorâs and Safety Manual. Improper use can cause serious injury! Preserve this Manual carefully!
WARNING!
FUELS WITH MORE THAN 10% ETHANOL ARE NOT APPROVED FOR USE IN MAKITA 2-STROKE ENGINES!
Use of alternative fuels, such as E-20 , E-85 or any fuels not meeting MAKITA requirements are not approved for use in MAKITA 2-stroke gasoline engines!(20% ethanol) (85% ethanol)
USE OF ALTERNATIVE FUELS CAN CAUSE THE FOLLOWING PROBLEMS:
Poor engine performance, loss of power, overheating, fuel vapor lock, improper clutch engagement, premature deterioration of fuel lines, premature deterioration of gaskets,
premature deterioration of carburetors.
USING ALTERNATIVE FUELS AND/OR 2-STROKE OILS NOT ACCORDING TO JASO FD OR ISO-L-EGD IN MAKITA 2-STROKE ENGINES WILL VOID YOUR ENGINE WARRANTY!
ATTENTION !
Suivez toujours les conseils de sĂ©curitĂ© du prĂ©sent manuel dâemploi et de sĂ©curitĂ©. Une utilisation incorrecte de la tronçonneuse peut entraĂźner des blessures graves!
Lisez et comprenez ce manuel. Conservez avec soin ce manuel!
ATTENTION !
LES CARBURANTS CONTENANT PLUS DE 10 % DâĂTHANOL NE SONT PAS AUTORISĂS POUR LâUTILISATION DANS LES MOTEURS 2 TEMPS!
Les carburants alternatifs, tels que E-20 , E-85 ou tout autre carburant nâĂ©tant pas conformes aux exigences MAKITA ne sont pas autorisĂ©s (20 % dâĂ©thanol) (85 % dâĂ©thanol)
pour lâutilisation dans les moteurs essence Ă 2 temps MAKITA!
LâUTILISATION DE CARBURANTS ALTERNATIFS PEUT CAUSER LES PROBLĂMES SUIVANTS:
Faible performance moteur, Perte de puissance, Surchauffe, Bouchons de vapeur dans la conduite dâessence, Embrayage incorrect, DĂ©tĂ©rioration prĂ©maturĂ©e des conduites
dâessence, DĂ©tĂ©rioration prĂ©maturĂ©e des joints dâĂ©tanchĂ©itĂ©, DĂ©tĂ©rioration prĂ©maturĂ©e des carburateurs.
LâUTILISATION DE CARBURANTS ALTERNATIFS ET/OU DâHUILES 2 TEMPS NON-CONFORMES Ă LA NORME JASO FD OU ISO-L-EGD DANS LES MOTEURS Ă 2 TEMPS
MAKITA ANNULERA VOTRE GARANTIE MOTEUR!
2
The EA7300P and EA7900P will be delivered in a protective cardboard box to prevent transport damage. Cardboard is
a basic raw material and is consequently reuseable or suitable for recycling (waste paper recycling).
Contents Page
Delivery inventory 3 ........................................................
Symbols 3 .......................................................................
Safety precautions 4-16 ..................................................
Denomination of components 7 ......................................
Technical data............................................................ 18
Mounting the guide bar and saw chain 19-21 .................
Chain brake 21 ...............................................................
Fuel / Refuelling.................................................... 22-23
Chain lubrication 24 ........................................................
Starting the engine 25 ....................................................
Stopping the engine................................................... 25
Checking the chain brake 25 ..........................................
Adjusting the carburetor 26 ............................................
Working in summer / winter 26 .......................................
Sharpening the saw chain 27-28 ....................................
Cleaning the brake band and sprocket interior 29 ..........
Contents Page
Cleaning the guide bar 30 ..............................................
Replacing the saw chain............................................ 30
Replacing the fuel îlter .............................................. 30
Cleaning the air îlter.................................................. 31
Replacing the spark plug 32 ...........................................
Replacing the starter cable 33 ........................................
Replacing the return spring 33 .......................................
Mounting the fan housing 34 ..........................................
Cleaning the cylinder area 34 .........................................
Replacing / cleaning the spark arrester screen 34 .........
Instructions for daily and periodic maintenance 35 ........
Service, spare parts and guarantee 35-36 .....................
Troubleshooting 36 .........................................................
Extract from the spare parts list 37 .................................
WARNING!
Careless or improper use of this product can cause serious or even fatal injury. Before operating a chain saw or other
MAKITA products it is important that you read, fully understand and carefully follow the instructions outlined in this
operatorâs manual. Kickback may cause severe or fatal injury and is one of many potential dangers in operating a chain
saw. Kickback and other safety related precautions are described in detail within this operatorâs manual. Additional
operatorâs manuals are available from www.makitausa.com and 1-800-4-MAKITA (462-5482) and MAKITA CANADA
INC.,1950 Forbes Street, Whitby, Ontario, L1N 7B7, Canada, Telephone: (905) 571 22 00.
This product complies with: American National Standard Institute B175.1-2012 chain saw safety standard.
Canadian Standards Association Z62.1-15 chain saw safety standard.
Z62.3-11 chain saw kickback standard.
This spark ignition system complies with
the Canadian standard ICES-002.
Society of Automotive Engineers SAEJ 335-Jun 95 âMultiposition small
engine exhaust system îre ignition
suppressionâ.
The Emissions Compliance Period referred to on the emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet federal emissions requirements. Category C= 50 hours, B= 125
hours, and A= 300 hours.
With the purchase of this chain saw you have chosen a German quality product. Important instructions for the assembly
and operation of this saw are given in this manual. For your own safety, we ask you to read the accident prevention
instructions very carefully before putting your chain saw into operation, as incorrect handling can, despite all precautions,
lead to accidents. With a little care and attention you will have good service and lasting satisfaction from this îrst-rate
product.
WARNING!
The ignition system of this equipment produces an electro magnetic îeld. This îeld may interfere with some medical
devices such as a pacemaker. To reduce the risk of serious or fatal injury, persons with a medical device should consult
with their physician and the manufacturer of the device before operating this equipment.
3
1
4
5 6 7
32
8
Delivery inventory
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
1 Chain saw
2 Guide bar
3 Saw chain
4 Chain protection cover
5 Universal wrench
6 Wrench
7 Screw driver for carburetor adjustment
8 Cylinder în cleaner
9 Operatorâs and Safety Manual (not shown)
Symbols
You will notice the following symbols on the chain saw and in the Operatorâs and Safety Manual.
Further symbols see page 8.
Read Operatorâs and Safety
Manual and follow the warning-
and safety precautions!
Particular care and caution!
Forbidden!
Wear protective helmet, eye and
ear protection!
Wear protective gloves!
No smoking!
No open îre!
Stop engine!
Push the starting valve
Engine - manual start
On/Off (I/O) switch
Caution, kickback!
Chain brake
Fuel and oil mixture
Working in summer / winter
Carburetor adjustment
Chain oil îll/oil pump
Saw chain oil
adjustment screw
First aid
Do not touch hot surfaces!
Recycling
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | SĂ€ge |
| Modell: | EA7900P |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita EA7900P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung SĂ€ge Makita
24 Mai 2024
22 Mai 2024
19 Mai 2024
11 Mai 2024
11 Mai 2024
4 Mai 2024
3 Mai 2024
28 April 2024
19 April 2024
17 April 2024
Bedienungsanleitung SĂ€ge
- SĂ€ge Panasonic
- SĂ€ge Cotech
- SĂ€ge Bosch
- SĂ€ge Parkside
- SĂ€ge Vonroc
- SĂ€ge AEG
- SĂ€ge Powerfix
- SĂ€ge Black And Decker
- SĂ€ge Cocraft
- SĂ€ge FERM
- SĂ€ge Ryobi
- SĂ€ge Skil
- SĂ€ge Trotec
- SĂ€ge Hilti
- SĂ€ge Bort
- SĂ€ge DeWalt
- SĂ€ge Einhell
- SĂ€ge Elu
- SĂ€ge Festool
- SĂ€ge Mafell
- SĂ€ge Triton
- SĂ€ge Worx
- SĂ€ge Tacklife
- SĂ€ge Hikoki
- SĂ€ge Hitachi
- SĂ€ge Hyundai
- SĂ€ge Hazet
- SĂ€ge Kress
- SĂ€ge Metabo
- SĂ€ge Stanley
- SĂ€ge KĂ€rcher
- SĂ€ge Atika
- SĂ€ge GĂŒde
- SĂ€ge Power Craft
- SĂ€ge Scheppach
- SÀge Bébé Confort
- SĂ€ge Workzone
- SĂ€ge Meec Tools
- SĂ€ge Dremel
- SĂ€ge Fieldmann
- SĂ€ge King Craft
- SĂ€ge Proxxon
- SĂ€ge Westfalia
- SĂ€ge Remington
- SĂ€ge Husqvarna
- SĂ€ge Stihl
- SĂ€ge Chicago Pneumatic
- SĂ€ge Dedra
- SĂ€ge Graphite
- SĂ€ge Snow Joe
- SĂ€ge Silverline
- SĂ€ge Holzmann
- SĂ€ge Sthor
- SĂ€ge Florabest
- SĂ€ge Hecht
- SĂ€ge Herkules
- SĂ€ge Stiga
- SĂ€ge Ford
- SĂ€ge Zipper
- SĂ€ge Yato
- SĂ€ge Baumr-AG
- SĂ€ge Greencut
- SĂ€ge Genesis
- SĂ€ge Evolution
- SĂ€ge Dolmar
- SĂ€ge Bavaria
- SĂ€ge Milwaukee
- SĂ€ge Narex
- SĂ€ge Toolcraft
- SĂ€ge Fein
- SĂ€ge AL-KO
- SĂ€ge Gardena
- SĂ€ge Craftsman
- SĂ€ge Defort
- SĂ€ge Powerplus
- SĂ€ge Alpha Tools
- SĂ€ge Martha Stewart
- SĂ€ge McCulloch
- SĂ€ge Ozito
- SĂ€ge Yard Force
- SĂ€ge Sun Joe
- SĂ€ge Draper
- SĂ€ge Solo
- SĂ€ge Texas
- SĂ€ge Ridgid
- SĂ€ge Porter-Cable
- SĂ€ge Hobart
- SĂ€ge Guede
- SĂ€ge Dexter Power
- SĂ€ge Felisatti
- SĂ€ge Gardenline
- SĂ€ge Grizzly
- SĂ€ge Homelite
- SĂ€ge HURRICANE
- SĂ€ge Plantiflor
- SĂ€ge Qualcast
- SĂ€ge Shindaiwa
- SĂ€ge Sterwins
- SĂ€ge Tanaka
- SĂ€ge Troy-Bilt
- SĂ€ge Meister Craft
- SĂ€ge Sovereign
- SĂ€ge Challenge
- SĂ€ge Challenge Xtreme
- SĂ€ge Truper
- SĂ€ge MacAllister
- SĂ€ge RIKON
- SĂ€ge Pro-Cut
- SĂ€ge Selion
- SĂ€ge Kreg
- SĂ€ge Proviel
- SĂ€ge Merox
- SĂ€ge Bullcraft
- SĂ€ge XU1
- SĂ€ge MTM
- SĂ€ge Urrea
- SĂ€ge EFA
- SĂ€ge MyTool
- SĂ€ge Ergotools Pattfield
- SĂ€ge IKRA
- SĂ€ge FIXIT
- SĂ€ge Bavaria By Einhell
- SĂ€ge Rona
- SĂ€ge Donau Elektronik
Neueste Bedienungsanleitung fĂŒr -Kategorien-
14 August 2024
7 August 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024