Makita DUR189 Bedienungsanleitung

Makita Rasentrimmer DUR189

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DUR189 (16 Seiten) in der Kategorie Rasentrimmer. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
INSTRUCTION MANUAL
Cordless Grass Trimmer
DUR189
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUR189
No load speed
(without cutting tool)
4,000/5,000/6,000 min
-1
Overall length
(without cutting tool)
1,510 - 1,610 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 198971-4 / 198972-2)
300 mm
Plastic blade
(P/N 198383-1 / 198384-9)
255 mm
Rated voltage D.C. 18 V
Net weight 3.0 - 3.4 kg
•
Due to our continuing program of research and development, the speciî‚¿cations herein are subject to change without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or î‚¿re.
Noise
Applicable standard : EN50636
Model Type Sound pressure level average
LPA
(dB(A)) Uncertainty K (dB(A))
DUR189 78 2.0Nylon cutting head
Plastic blade 78 3.7
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
Applicable standard : EN50636
Model Type Left hand Right hand
ah,W (m/s2) Uncertainty K
(m/s2)
ah,W (m/s2) Uncertainty K
(m/s2)
DUR189 Nylon cutting head 2.5 0.4 2.5 0.1
Plastic blade 2.5 0.6 2.5 0.3
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
3 ENGLISH
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
360°
Keep bystanders away.
15m(50 )FT Keep distance at least 15 m.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not expose to moisture.
Never use metal blade.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material! In observance of the
European Directives, on Waste Electric
and Electronic Equipment and Batteries
and Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, î‚¿re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
1. Be familiar with the controls and proper use of
the equipment.
2. Cutting elements continue to rotate after the
motor is switched off.
3. Never allow children or people unfamiliar with
the instructions to use the machine. Local reg-
ulations may restrict the age of the operator.
4. Stop using the machine while people, espe-
cially children, or pets are nearby.
5.
Only use the machine in daylight or good artiî‚¿cial
light. Avoid using the machine in bad weather con-
ditions especially when there is a risk of lightning.
6.
Before using the machine and after any impact, check
for signs of wear or damage and repair as necessary.
7.
Take care against injury from any device î‚¿tted for
trimming the î‚¿lament line length. After extending
new cutter line always return the machine to its
normal operating position before switching on.
8. Never î‚¿t metal cutting elements.
9.
This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
10.
Use the tool with the utmost care and attention.
11.
Operate the tool only if you are in good physical
condition. Perform all work calmly and carefully.
Use common sense and keep in mind that the oper-
ator or user is responsible for accidents or hazards
occurring to other people or their property.
12. Never operate the tool when tired, feeling ill or
under the inuence of alcohol or drugs.
13. The tool should be switched off immediately if
it shows any signs of unusual operation.
14. Keep î‚¿ngers away from switch trigger when
not operating the tool and when moving from
one operating position to another.
Intended use of the tool
1. Use right tool. The cordless grass trimmer is
only intended for cutting grass, light weeds. It
should not be used for any other purpose such
as hedge cutting as this may cause injury.
Personal protective equipment

Produktspezifikationen

Marke: Makita
Kategorie: Rasentrimmer
Modell: DUR189

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita DUR189 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Rasentrimmer Makita

Makita

Makita DUR368A Bedienungsanleitung

12 Oktober 2024
Makita

Makita 3708F Bedienungsanleitung

30 August 2024
Makita

Makita EM2653LHN Bedienungsanleitung

17 August 2024
Makita

Makita RBC256 Bedienungsanleitung

9 August 2024
Makita

Makita DUR183L Bedienungsanleitung

8 August 2024
Makita

Makita EBH341U Bedienungsanleitung

6 August 2024
Makita

Makita DRT50RMJX2 Bedienungsanleitung

6 August 2024
Makita

Makita DUR188L Bedienungsanleitung

6 August 2024
Makita

Makita ER2650LH Bedienungsanleitung

5 August 2024
Makita

Makita EM4350UH Bedienungsanleitung

5 August 2024

Bedienungsanleitung Rasentrimmer

Neueste Bedienungsanleitung für -Kategorien-

Black And Decker

Black And Decker GL570 Bedienungsanleitung

16 Oktober 2024
Husqvarna

Husqvarna 236R Bedienungsanleitung

14 Oktober 2024
Ryobi

Ryobi RY30544 Bedienungsanleitung

14 Oktober 2024
Meec Tools

Meec Tools 723-076 Bedienungsanleitung

11 Oktober 2024
Husqvarna

Husqvarna 110iL Bedienungsanleitung

10 Oktober 2024
Hyundai

Hyundai HYTR60LI Bedienungsanleitung

1 Oktober 2024
Stihl

Stihl FS 490 C-M Bedienungsanleitung

1 Oktober 2024
Ryobi

Ryobi One+ P20220 Bedienungsanleitung

24 September 2024
Husqvarna

Husqvarna 325RDX Bedienungsanleitung

23 September 2024
Stihl

Stihl FixCut 5-2 Bedienungsanleitung

20 September 2024