Makita DUC305PG2 Bedienungsanleitung
Makita
Zaagmachine
DUC305PG2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DUC305PG2 (20 Seiten) in der Kategorie Zaagmachine. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
INSTRUCTION MANUAL
Cordless Chain Saw
DUC305
DUC355
DUC405
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUC305 DUC355 DUC405
Overall length (without guide bar) 443 mm
Rated voltage D.C. 36 V
Net weight 4.6 - 5.5 kg
Standard guide bar length 300 mm 350 mm 400 mm
Recommended guide bar length 300 - 400 mm
Applicable saw chain type
(refer to the table below)
90PX
91PX
Sprocket Number of teeth 6
Pitch 3/8″
Chain speed 0 - 20 m/s
(0 - 1,200 m/min)
Chain oil tank volume 200 cm
3
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injuryand/orre.
Saw chain and guide bar
Saw chain type 90PX
Number of drive links 46 52 56
Guide bar Guide bar length 300 mm 350 mm 400 mm
Cutting length 275 mm 330 mm 370 mm
Pitch 3/8″
Gauge 1.1 mm
Type Sprocket nose bar
Saw chain type 91PX
Number of drive links 46 52 56
Guide bar Guide bar length 300 mm 350 mm 400 mm
Cutting length 275 mm 330 mm 370 mm
Pitch 3/8″
Gauge 1.3 mm
Type Sprocket nose bar
WARNING:Useappropriatecombinationoftheguidebarandsawchain.Otherwisepersonalinjurymay
result.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Wear ear protection.
3 ENGLISH
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
Do not expose to moisture.
Maximum permissible cut length
Direction of chain travel
Sawchainoiladjustment
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or battery
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their imple-
mentation in accordance with national laws,
electric equipment and batteries and battery
pack(s) that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Intended use
This chain saw is intended for sawing wood.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-13:
Model DUC305
Sound pressure level (LpA ) : 87.7 dB(A)
Sound power level (LWA) : 100.4 dB (A)
Uncertainty (K) : 2 dB(A)
Model DUC355
Sound pressure level (LpA ) : 87.7 dB(A)
Sound power level (LWA) : 100.4 dB (A)
Uncertainty (K) : 2 dB(A)
Model DUC405
Sound pressure level (LpA ) : 87.7 dB(A)
Sound power level (LWA) : 100.4 dB (A)
Uncertainty (K) : 2 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-13:
Model DUC305
Work mode: cutting wood
Vibration emission (ah,W) : 5.3 m/s2
Uncertainty (K) : 1.5 m/s2
Model DUC355
Work mode: cutting wood
Vibration emission (ah,W) : 5.3 m/s2
Uncertainty (K) : 1.5 m/s2
Model DUC405
Work mode: cutting wood
Vibration emission (ah,W) : 5.3 m/s2
Uncertainty (K) : 1.5 m/s2
NOTE:
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to pro-
tect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
Produktspezifikationen
Marke: | Makita |
Kategorie: | Zaagmachine |
Modell: | DUC305PG2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DUC305PG2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zaagmachine Makita
15 September 2024
18 August 2024
15 August 2024
12 August 2024
11 August 2024
9 August 2024
9 August 2024
9 August 2024
9 August 2024
8 August 2024
Bedienungsanleitung Zaagmachine
- Zaagmachine Brennenstuhl
- Zaagmachine Cotech
- Zaagmachine Bosch
- Zaagmachine Flex
- Zaagmachine Parkside
- Zaagmachine Vonroc
- Zaagmachine AEG
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine FERM
- Zaagmachine Ryobi
- Zaagmachine Skil
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Maestro
- Zaagmachine Prime3
- Zaagmachine Hilti
- Zaagmachine Bort
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Festool
- Zaagmachine Mafell
- Zaagmachine Worx
- Zaagmachine Tacklife
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Hyundai
- Zaagmachine Fuxtec
- Zaagmachine Max
- Zaagmachine Metabo
- Zaagmachine Stanley
- Zaagmachine Atika
- Zaagmachine Güde
- Zaagmachine Power Craft
- Zaagmachine Scheppach
- Zaagmachine Workzone
- Zaagmachine Biltema
- Zaagmachine Meec Tools
- Zaagmachine Dremel
- Zaagmachine Fieldmann
- Zaagmachine Westfalia
- Zaagmachine Remington
- Zaagmachine Husqvarna
- Zaagmachine Stihl
- Zaagmachine Dedra
- Zaagmachine DURO
- Zaagmachine Graphite
- Zaagmachine Pattfield
- Zaagmachine Silverline
- Zaagmachine Holzmann
- Zaagmachine Florabest
- Zaagmachine Stiga
- Zaagmachine Hammer
- Zaagmachine ACG
- Zaagmachine Greenworks
- Zaagmachine Huvema
- Zaagmachine Robust
- Zaagmachine Zipper
- Zaagmachine Baumr-AG
- Zaagmachine Genesis
- Zaagmachine BluCave
- Zaagmachine Morrison
- Zaagmachine Batavia
- Zaagmachine Evolution
- Zaagmachine Matrix
- Zaagmachine Dolmar
- Zaagmachine Bavaria
- Zaagmachine Milwaukee
- Zaagmachine Toolcraft
- Zaagmachine Fein
- Zaagmachine AL-KO
- Zaagmachine CMI
- Zaagmachine IDEAL
- Zaagmachine Cobra
- Zaagmachine Verto
- Zaagmachine Craftsman
- Zaagmachine Powerplus
- Zaagmachine Alpha Tools
- Zaagmachine Elektra Beckum
- Zaagmachine McCulloch
- Zaagmachine Ozito
- Zaagmachine Yard Force
- Zaagmachine Sun Joe
- Zaagmachine Solo
- Zaagmachine Texas
- Zaagmachine Ridgid
- Zaagmachine Porter-Cable
- Zaagmachine VARO
- Zaagmachine Spear & Jackson
- Zaagmachine Duro Pro
- Zaagmachine Ferrex
- Zaagmachine FOM
- Zaagmachine Gamma
- Zaagmachine Gardenline
- Zaagmachine Global
- Zaagmachine Goon
- Zaagmachine Gude Pro
- Zaagmachine HURRICANE
- Zaagmachine Lux Tools
- Zaagmachine Max Bahr
- Zaagmachine Maxx
- Zaagmachine Qualcast
- Zaagmachine Tanaka
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Masport
- Zaagmachine Meister Craft
- Zaagmachine Clarke
- Zaagmachine Sovereign
- Zaagmachine Challenge Xtreme
- Zaagmachine MacAllister
- Zaagmachine RIKON
- Zaagmachine Jonsered
- Zaagmachine Einhell Bavaria
- Zaagmachine Proviel
- Zaagmachine Tryton
- Zaagmachine MTM
- Zaagmachine MyTool
- Zaagmachine McKenzie
- Zaagmachine Anova
- Zaagmachine Yellow Garden Line
- Zaagmachine Ergotools Pattfield
- Zaagmachine IKRA
- Zaagmachine FIXIT
- Zaagmachine Bestgreen
- Zaagmachine BGU
- Zaagmachine Ultranatura
- Zaagmachine TAURUS Titanium
- Zaagmachine Maxbear
- Zaagmachine Extralink
- Zaagmachine Stalco
Neueste Bedienungsanleitung für -Kategorien-
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
15 September 2024
15 September 2024
15 September 2024