Makita DUC256PG2 Bedienungsanleitung
Makita
Zaagmachine
DUC256PG2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DUC256PG2 (24 Seiten) in der Kategorie Zaagmachine. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
INSTRUCTION MANUAL
Cordless Chain Saw
DUC256
DUC306
DUC356
DUC406
DUC256C
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUC256 DUC306 DUC356 DUC406 DUC256C
Overall length (without guide bar) 270 mm
Rated voltage D.C. 36 V
Net weight 4.2 kg*1
*2 4.6 - 4.8 kg 4.7 - 4.9 kg 4.8 - 5.0 kg 4.8 - 5.1 kg 4.6 - 4.7 kg
Standard guide bar length 250 mm 300 mm 350 mm 400 mm 250 mm
Recommended guide bar
length
with 90PX 250 - 400 mm -
with 91PX 250 - 400 mm -
with 25AP 250 mm-
Applicable saw chain type
(refer to the table below)
90PX
91PX
25AP
Standard sprocket Number of teeth 6 9
Pitch 3/8″ 1/4″
Chain speed 0 - 20 m/s
(0 - 1,200 m/min)
Chain oil tank volume 200 cm
3
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
*1: Weight, with largest battery cartridge and empty oil tank, and without guide bar and chain, according to EN ISO
11681-2.
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge.
Applicable battery cartridge
BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injuryand/orre.
Saw chain, guide bar, and sprocket combination
Saw chain type 90PX
Number of drive links 40 46 52 56
Guide bar Guide bar length 250 mm 300 mm 350 mm 400 mm
Cutting length 238 mm 294 mm 350 mm 387 mm
Pitch 3/8″
Gauge 1.1 mm
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
Saw chain type 91PX
Number of drive links 40 46 52 56
Guide bar Guide bar length 250 mm 300 mm 350 mm 400 mm
Cutting length 238 mm 294 mm 350 mm 387 mm
Pitch 3/8″
Gauge 1.3 mm
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
3 ENGLISH
Saw chain type 25AP
Number of drive links 60
Guide bar Guide bar length 250 mm
Cutting length 253 mm
Pitch 1/4″
Gauge 1.3 mm
Type Carving bar
Sprocket Number of teeth 9
Pitch 1/4″
WARNING:Useappropriatecombinationoftheguidebarandsawchain.Otherwisepersonalinjurymay
result.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Wear ear protection.
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
This saw is to be used by properly trained
operators only.
Do not expose to moisture.
Maximum permissible cut length
Always use two hands when operating the
chain saw.
Beware of chain saw kickback and avoid
contact with bar tip.
Direction of chain travel
Sawchainoiladjustment
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or battery
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their imple-
mentation in accordance with national laws,
electric equipment and batteries and battery
pack(s) that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Intended use
The tool is intended for cutting branches and pruning
trees. It is also suitable for tree service.
Noise
The typical A-weighted noise level determined accord-
ing to EN ISO 11681-2:
Model DUC256
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DUC306
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DUC356
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DUC406
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
Model DUC256C
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Produktspezifikationen
Marke: | Makita |
Kategorie: | Zaagmachine |
Modell: | DUC256PG2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DUC256PG2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zaagmachine Makita
3 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
24 September 2024
15 September 2024
31 August 2024
31 August 2024
25 August 2024
20 August 2024
Bedienungsanleitung Zaagmachine
- Zaagmachine Brennenstuhl
- Zaagmachine Cotech
- Zaagmachine Bosch
- Zaagmachine Flex
- Zaagmachine Parkside
- Zaagmachine Vonroc
- Zaagmachine AEG
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine FERM
- Zaagmachine Ryobi
- Zaagmachine Skil
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Maestro
- Zaagmachine Prime3
- Zaagmachine Hilti
- Zaagmachine Bort
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Festool
- Zaagmachine Mafell
- Zaagmachine Maktec
- Zaagmachine Worx
- Zaagmachine Tacklife
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Hyundai
- Zaagmachine Fuxtec
- Zaagmachine Kress
- Zaagmachine Max
- Zaagmachine Metabo
- Zaagmachine Stanley
- Zaagmachine Atika
- Zaagmachine Güde
- Zaagmachine Power Craft
- Zaagmachine Scheppach
- Zaagmachine Workzone
- Zaagmachine Biltema
- Zaagmachine Meec Tools
- Zaagmachine Dremel
- Zaagmachine Fieldmann
- Zaagmachine Proxxon
- Zaagmachine Westfalia
- Zaagmachine Remington
- Zaagmachine Husqvarna
- Zaagmachine Stihl
- Zaagmachine Dedra
- Zaagmachine DURO
- Zaagmachine Graphite
- Zaagmachine Pattfield
- Zaagmachine Silverline
- Zaagmachine Holzmann
- Zaagmachine Florabest
- Zaagmachine Stiga
- Zaagmachine Hammer
- Zaagmachine ACG
- Zaagmachine Greenworks
- Zaagmachine Huvema
- Zaagmachine Robust
- Zaagmachine Zipper
- Zaagmachine Yato
- Zaagmachine Baumr-AG
- Zaagmachine Genesis
- Zaagmachine BluCave
- Zaagmachine Morrison
- Zaagmachine Batavia
- Zaagmachine Evolution
- Zaagmachine Matrix
- Zaagmachine Dolmar
- Zaagmachine Bavaria
- Zaagmachine Brüder Mannesmann
- Zaagmachine Milwaukee
- Zaagmachine Narex
- Zaagmachine Toolcraft
- Zaagmachine Fein
- Zaagmachine AL-KO
- Zaagmachine CMI
- Zaagmachine IDEAL
- Zaagmachine Cobra
- Zaagmachine Verto
- Zaagmachine Craftsman
- Zaagmachine Powerplus
- Zaagmachine Alpha Tools
- Zaagmachine Echo
- Zaagmachine Elektra Beckum
- Zaagmachine Toledo
- Zaagmachine McCulloch
- Zaagmachine Ozito
- Zaagmachine Yard Force
- Zaagmachine Sun Joe
- Zaagmachine Solo
- Zaagmachine Texas
- Zaagmachine Ridgid
- Zaagmachine Porter-Cable
- Zaagmachine VARO
- Zaagmachine Spear & Jackson
- Zaagmachine Duro Pro
- Zaagmachine Erbauer
- Zaagmachine Ergofix
- Zaagmachine Exakt
- Zaagmachine Ferrex
- Zaagmachine FOM
- Zaagmachine Gamma
- Zaagmachine Gardenline
- Zaagmachine Global
- Zaagmachine Goon
- Zaagmachine Grizzly
- Zaagmachine Gude Pro
- Zaagmachine HURRICANE
- Zaagmachine Lux Tools
- Zaagmachine Max Bahr
- Zaagmachine Maxx
- Zaagmachine Qualcast
- Zaagmachine Tanaka
- Zaagmachine Toolson
- Zaagmachine Troy-Bilt
- Zaagmachine Avantco
- Zaagmachine Wolfcraft
- Zaagmachine Masport
- Zaagmachine Garland
- Zaagmachine Meister Craft
- Zaagmachine Clarke
- Zaagmachine Sovereign
- Zaagmachine Challenge
- Zaagmachine Challenge Xtreme
- Zaagmachine Truper
- Zaagmachine Vulcan
- Zaagmachine MacAllister
- Zaagmachine RIKON
- Zaagmachine Backyard Pro Butcher Series
- Zaagmachine Jonsered
- Zaagmachine Einhell Bavaria
- Zaagmachine Proviel
- Zaagmachine Tryton
- Zaagmachine MTM
- Zaagmachine EFA
- Zaagmachine MyTool
- Zaagmachine McKenzie
- Zaagmachine Anova
- Zaagmachine Yellow Garden Line
- Zaagmachine Ergotools Pattfield
- Zaagmachine IKRA
- Zaagmachine FIXIT
- Zaagmachine Bestgreen
- Zaagmachine BGU
- Zaagmachine Power Smart
- Zaagmachine Ultranatura
- Zaagmachine TAURUS Titanium
- Zaagmachine Maxbear
- Zaagmachine Extralink
- Zaagmachine Stalco
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024