Makita DTW700RTJ Bedienungsanleitung
Makita
Drehmaschine
DTW700RTJ
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Makita DTW700RTJ (16 Seiten) in der Kategorie Drehmaschine. Dieser Bedienungsanleitung war fรผr 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16

INSTRUCTION MANUAL
Cordless Impact Wrench
DTW700
DTW701
ENGLISH: Original instructions
Read before use.

2 ENGLISH
SPECIFICATIONS
Model: DTW700 DTW701
Fastening capacities Standard bolt M10 - M24
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed Max impact mode (4) 0 - 2,200 min
-1
Hard impact mode (3) 0 - 1,900 min
-1
Medium impact mode (2) 0 - 1,200 min
-1
Soft impact mode (1) 0 - 500 min
-1
Impacts per minute Max impact mode (4) 0 - 2,700 min
-1
Hard impact mode (3) 0 - 2,400 min
-1
Medium impact mode (2) 0 - 1,700 min
-1
Soft impact mode (1) 0 - 1,000 min
-1
Overall length 170 mm
Rated voltage D.C. 18 V
Net weight 2.3 - 2.7 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎di๏er๎from๎country๎to๎country.
โข๎ The๎weight๎may๎di๏er๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
โข๎ Some๎of๎the๎battery๎cartridges๎and๎chargers๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎Use๎of๎any๎other๎battery๎cartridges๎
and๎chargers๎may๎cause๎injury๎and/or๎๎ฟre.
Symbols
The๎followings๎show๎the๎symbols๎which๎may๎be๎used๎
for๎the๎equipment.๎Be๎sure๎that๎you๎understand๎their๎
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do not dispose of electric equipment or
battery๎pack๎together๎with๎household๎waste๎
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected๎separately๎and๎returned๎to๎an๎envi-
ronmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN62841-2-1:
Model DTW700
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty๎(K)๎:๎3๎dB(A)
Model DTW701
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty๎(K)๎:๎3๎dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method๎and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎
another.
NOTE: The declared noise emission value(s)
may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎
exposure.

3 ENGLISH
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can di๏er from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o๏ and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Model DTW700
Work mode: impact tightening of fasteners of the maxi-
mum๎capacity๎of๎the๎tool
Vibration emission (a
h) : 19.0 m/s2
Uncertainty๎(K)๎:๎2.0๎m/s
2
Model DTW701
Work mode: impact tightening of fasteners of the maxi-
mum๎capacity๎of๎the๎tool
Vibration emission (a
h) : 19.0 m/s2
Uncertainty๎(K)๎:๎2.0๎m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎another.
NOTE:๎The๎declared๎vibration๎total๎value(s)๎may๎also๎
be๎used๎in๎a๎preliminary๎assessment๎of๎exposure.
WARNING:
The vibration emission during actual
use of the power tool can di๏er from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o๏ and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided
with this power tool. Failure to follow all instructions
listed๎below๎may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎
serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎to๎lose๎control.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodi๎ฟed๎plugs๎and๎
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
๎ฟelds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎tools๎may๎result๎in๎serious๎personal๎injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as๎a๎dust๎mask,๎non-skid๎safety๎shoes,๎hard๎hat๎or๎
hearing protection used for appropriate conditions
will๎reduce๎personal๎injuries.
3. Prevent unintentional starting. Ensure the
switch is in the o๏-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎Carrying๎power๎tools๎with๎
your๎๎ฟnger๎on๎the๎switch๎or๎energising๎power๎tools๎
that have the switch on invites accidents.
Produktspezifikationen
Marke: | Makita |
Kategorie: | Drehmaschine |
Modell: | DTW700RTJ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DTW700RTJ benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Drehmaschine Makita

25 Mai 2024

23 Mai 2024

23 Mai 2024

23 Mai 2024

19 Mai 2024

13 Mai 2024

13 Mai 2024

12 Mai 2024

11 Mai 2024

7 Mai 2024
Bedienungsanleitung Drehmaschine
- Drehmaschine Basetech
- Drehmaschine Panasonic
- Drehmaschine Bosch
- Drehmaschine Parkside
- Drehmaschine Vonroc
- Drehmaschine AEG
- Drehmaschine Powerfix
- Drehmaschine EMOS
- Drehmaschine Black And Decker
- Drehmaschine Cocraft
- Drehmaschine FERM
- Drehmaschine Ryobi
- Drehmaschine Skil
- Drehmaschine Trotec
- Drehmaschine Carrera
- Drehmaschine Hilti
- Drehmaschine DeWalt
- Drehmaschine Einhell
- Drehmaschine Elu
- Drehmaschine Festool
- Drehmaschine Worx
- Drehmaschine Kraftwerk
- Drehmaschine Hikoki
- Drehmaschine Hitachi
- Drehmaschine Hazet
- Drehmaschine Kress
- Drehmaschine Metabo
- Drehmaschine Stanley
- Drehmaschine Gรผde
- Drehmaschine Biltema
- Drehmaschine Meec Tools
- Drehmaschine Dremel
- Drehmaschine Fieldmann
- Drehmaschine Beta
- Drehmaschine Westfalia
- Drehmaschine Chicago Pneumatic
- Drehmaschine Dedra
- Drehmaschine Silverline
- Drehmaschine Sthor
- Drehmaschine Yato
- Drehmaschine Pansam
- Drehmaschine Bavaria
- Drehmaschine Brรผder Mannesmann
- Drehmaschine Milwaukee
- Drehmaschine Toolcraft
- Drehmaschine Chamberlain
- Drehmaschine Fein
- Drehmaschine Bonus
- Drehmaschine Craftsman
- Drehmaschine Powerplus
- Drehmaschine Ozito
- Drehmaschine Porter-Cable
- Drehmaschine Steren
- Drehmaschine Wiha
- Drehmaschine StarTech.com
- Drehmaschine Meister Craft
- Drehmaschine Truper
- Drehmaschine Park Tool
- Drehmaschine XU1
- Drehmaschine Urrea
- Drehmaschine Wera
- Drehmaschine VOREL
- Drehmaschine Netter Vibration
- Drehmaschine Rodcraft
- Drehmaschine Bavaria By Einhell
- Drehmaschine SW-Stahl
Neueste Bedienungsanleitung fรผr -Kategorien-

4 Dezember 2024

26 Juni 2024

26 Juni 2024

21 Juni 2024

18 Juni 2024

18 Juni 2024

18 Juni 2024

18 Juni 2024

18 Juni 2024

18 Juni 2024